Looking to see if anyone could drop some quick knowledge on how to wrap this up. I have the mirrors/switch. Did a quick wire to test and see if they worked. The newly driverside mirror would fold in but would not fold back out. So a couple things either I wired it wrong (literally matches the two wires from the switch to the mirror color for color).. or it is on some sort of circuit where both mirrors need to be fully wired for it to work properly or I got shammed by an asshole in HLR, CO...there's an adundance of info for 2nd and 4th gens...not much for 3rd... I have an 02 Legacy L wagon. Looking to wire in jdm mirrors w only the folding feature. Anything helps!