Quote Originally Posted by BDAlex95 View Post
My compression is as follows:
Cylinder Bore: 97mm
Piston Stroke: 75mm
HG Diameter: 98mm
HG Thickness: 2.032mm
Combustion Chamber Vol: 46.6cc
Piston Dish: -12mm
Deck Clearance: -.0012
Final CR: 8.4979

I have the v2 25D heads and v1 22E block. Is my compression lower than I calculated since I'm using a 2mm headgasket?
Yes. You're actually closer to 8.3:1.