Activity Stream

right - it doesn't fluctuate, but I think you're saying its idles fine for a while, then switches to a low-idle mode for no apparent reason, then at...

Thanks so much for answering The idle does not fluctuate up and down , it just gets very low , but doesnt stall, It is really in limp mode, and...

Idle Air Control Valve. Honestly -- idling problems that cycle in and out make me think of very few suspects: 1. Aircon is on and there's a...

After a bit of fits and starts, I completed installing the Smart View Mirror that came in the Touring model. I found the mirror and camera on eBay...

plugs were changed a year ago , pretty sure the gapping was ok , but I will check nothing to loose

Have you pulled the plugs and checked the gaps?

ok, install new f plug for crankcase , new TB gasket and new TPS , car starts and runs..... But I still have the same issue , seems to be in limp...

Thanks for asking , waiting for part from JP Carparts.com parts coming this Friday , the good think the yen is almost at par with the Canadian...

How did you make out?

Idle Air Control Valve IACV Intake Air Control Valve IACV :smilebox:

actuator ,I see mate

idle air control valve

re-read what I wrote.

Sorry mate, Duncanm , that is not the Idle air control valve

Have a think about it - secondary turbo doesn't have exhaust routed to it until you 'get on it'. So it (and the secondary downpipe) doesn't get hot....

Mine had some wiring foam cover near the firewall on that same side that was touching the heat shield of the 2nd turbo ,

Just bought this to finally replace the Subaru track wagon. And yes, I still miss both of my Subarus. ...

A few weeks ago with the help of Hinyo and Rubie_25GT and another friend the Miata got a headlight retrofit along with JDM multicoat fog lights and I...

broken nipple for one of the hose for PCV ventilation , plugged it with epoxy , not sure if it gets too hot for the epoxy to go soft

Thanks man for the advice I need a smoke machine to test the vacuum lines , could be the issue before I played with the TPS , Now it will not...

Way better for sure.

Vacuum leak somewhere? I had a similar issue with my SS. Is there any codes?

More on that damn car mystery, I removed the TPS sensor ( did not know what is was ) did full voltage test , 0.1 v to 5v at WOT , now car starts and...

So, the Metra installation kit I got from Crutchfield has been.. suboptimal. The radio sits back at least a full 1/2" behind the front of the panel,...

HID headlight assemblies from a Crosstrek Limited are finally installed. The passenger side is a brand new factory fresh assembly, the drivers side...

Hey good to see you. I still lurk , but it’s pretty slow around here

Nope-we have a volvo nut-a couple of audi owners-a honda fan (he was a subie tech) one tech (20 plus years at the dealer-will not drive one) drives a...

Thank you Are you the outcast? The VW dealer I was going to, all the techs drove MK2's to MK5 Jettas and GTi's.

:smt039 If you need any genuine Vdub parts-let me know-I work part time at a dealership for the past two 1/2 years-and driving a '23 wrx for the past...