Header removal

[Bd4mp-dub]

I was trying to put on my MS3 headers and can not get the 2 bolts to the cat off!! any suggestions? how did you guys get these off?

[LSiTo5Revo]

Torch em.

[green97gt]

i usually cut them off with a grinder and get new ones.

[httrdd]

i usually cut them off with a grinder and get new ones.

+ 1 always replace exhaust bolts that have been on a while. Sawzall or hacksaw and done!

[jey]

Soak it in PB Blaster. Use a 6-point socket and a long breaker bar :)

[anothernord]

I soaked the bolts in PB blaster, used a breaker bar, then a sawzall. Then, I just dropped the whole exhaust and worked on it on the ground. It was much easier removed from the car.