1999 OUTBACK PARTS LIST

[lenzg07]

i have owned this 1999 legacy outback for three months and i am wanting to lower it and was wondering if anyone could give me a parts list needed to delete the spacers on the crossmembers. like what bolts to use and so forth when i take the spacers out.

thank you guys for all of your insight thus far

[Huffer]

When you take the spacers out, you can just measure and shorten the bolt. Or run along to the hardware store to find the right size.

Depending on what you use to lower, you may not need to remove the spacers at all. sybir is lowered on TEIN coilovers for a GD WRX and never removed the spacers.

[lenzg07]

i was also wondering on the driveshaft, and shift linkage and shifter, will i have to change out anything with that stuff or could i just leave it as is?

also when the spacers are out i dont have to put any bushings in their place just crossmember to body right? and at that point i would assume any legacy or impreza struts and springs would work correct?

[lenzg07]

also will i have to change anything on the front and or rear swaybars or links as well?