Dyno run

[haplesspete]

Hey guys our club has a Dyno run once a month I ran mine in the weekend with the boost controler turned off and standard vf26 and vf27 turbos. check out the torque it is putting out
let me know what you think :-D

http://img25.echo.cx/img25/9097/rskdyno0db.jpg

http://img20.echo.cx/img20/2513/dynoday0048lz.jpg

PETE

[legacy92ej22t]

It's kind of hard to know exactly what I'm looking at there Pete. We use ft. lbs. for torque, not Nm. It looks like you have decent power at the wheels but the torque number seems low to me. I actually put down more torque then power on my setup.

Nice B4. 8)

[haplesspete]

Sorry about the size of that chart I dont know how that happend :roll:
I dont know how the metric conversion works out but a 5.7litre chev went before me and made 170kw and 500nm of torque and I got just over 650nm, I was told that it was a bit low but I thought it would be down around 450. Next month i will run my other ecu and bang the boost back up to 18-20lb. I was running 96 octne fuel too when the boost is up I should be running 100 plus octne. should be interesting to see the results.

PETE

[belladonna]

1 kilowatt = 1.34 horsepower
so
163.7 kw = 219.5 hp (roughly)

1 nm = .74 ft. lbs.
so
650nm = 481 ft. lbs. that seems pretty high to me, maybe i messed up the conversion :?

[Reason]

Impressive numbers, I wanted to get a dyno date for the members in the area. Maybe this summer, we will see. Can you try to shrink your chart. thanks