Girodisc's 99 Legacy GT

[Girodisc]

Hey all. Just got my car done I was referred to this site. Thought I would post up some pics of my car.

Mods list:

Custom Front Bumper (Zero/sports Design)
Custom Rear Bumper (09 Legacy Design)
Custom 89 Honda Accord Fender Flares (All Metal)
Custom Tuxedo Black Paint
Custom Pearled Di-Noc Carbon Accents
Custom EXO X Roof Mounted Antenna
JDM tinted Taillights
JDM Blacked out Headlights
JDM Fog Lights
HID kits in projector housings

Engine:
Short Ram Intake
Borla Headers
Custom Exhaustr w/ WRX Cat, STi Resonator, and Custom Quad Tips (Temporary)
Crank Pully
Iridium Plugs

Drivetrain:
JDM Ver 7 RA-Spec C 6-Speed non DCCD Close Ratio Tranny
05 STi 5x114.3 Hubs
Custom Drive Shaft
Exedy Certametallic Clutch
ACT Prolite Flywheel
STi, Motor/ Tranny Mounts
Agency Power Short Shifter w/ Kartboy Bushings

JDM STi Brembo Calipers Painted Henessy Viper "Snake Bite" green
Girodisc STi 2pc Front + Rear Rotors
Girodisc Magic Pads
Girodisc SS Lines

Stance LX Coilovers
Whiteline Roll Center Kit
All STi X members and suspension parts

18x9.5 +15 MB Battles on 245/35/18 BF Goodridge G-Force T/A Tires
Green Vision R Lug Nuts

Interior:
Custom 01 Toyota Celica Leather Seats
Custom Black Floor Carpet
Carbon Headliner
Carbon Door Inserts
Carbon Rear Deck Lid
Custom Painted Trim
Custom Red "Audiesk" Led Lighting
All Red Illumination
SPT Carbon Shift Knob Machined to Fit 6mt
SPT Carbon E-Brake Handle
STi Pedal Set
STi Floor Mats

Ecplise AVX726E Double Din touch screen NAV deck

Future HP Plans: (have a lot of this already but I am still acquiring more parts so I can do the swap)

EZ30 Swap (01-04 LL Bean Outback 3.0 H6)
Hydra EMS
Outback Radiator
OBX EZ30 Headers
Custom Modified Tsudo 350Z exhaust
Custom Dual Intakes
Tucked Harness
Relocated Battery
Relocated ABS Pump
Custom Hidden Brake Hard Lines
Custom dolled up engine etc....

Pics:

Better pics when the weather gets nice..

https://sl-i.net/FORUM/images/imported/2010/03/4449172639_c75580eb59_b-1.jpg

https://sl-i.net/FORUM/images/imported/2010/03/4449948168_60beccc020_b-1.jpg

https://sl-i.net/FORUM/images/imported/2011/12/4449173439_8d641ef828_b-1.jpg

[Reason]

This is a sexy Legacy.

[00legacy]

Full sheet metal fenders, love it when I read that, means allot of hard work went into it. Looks like allot of quality work for a very awesome quality car, good job :smile: Would like to see how the tune goes with that Hydra EMS and EZ30 swap. Do you know who is going to tune it?

[impreza_GC8]

Wow, the exterior is def complete. Onto the motor build. I'm lovin' it! Welcome to the club. Please shed some light on your lighting setup. Seems like your parking lights are not coming on, and I can tell that you have your city lights wired up separately from the rest of the lights. Let me know what you've got going on there. Thanks!

[httrdd]

You forgot to include the vid of that beast!

http://www.youtube.com/watch?v=edoghDji ... r_embedded (http://www.youtube.com/watch?v=edoghDjiljg&feature=player_embedded)

[Girodisc]

My little parking lights work and my Headlights and Fog lights have HIDs in them running off the stock sender wires. The second filament in the Fogs I wired to my turn signal arm so when I turn I signal right for instance the right fog light stays steady on. Then turns off then the switch clicks off. I wanted only my projectors to be on when I drove normally so I thought that was a cleaver use for them. Work great.

Johann

[Airgne]

i think your in the wrong section unless you have a members ride already, if not i will move it over there for you. it is very nice. im thinking of goin wider, and will have to do somthing along the same lines.

[impreza_GC8]

No. I'm talking about the city lights being independent of the parking lights. Parking lights are the orange lights in the corner of each lense, they should be on all the time and then they should flash for your turn signals. City lights are the little bulbs inside the headlights, they only come in JDM headlights.

[Girodisc]

I don't have a members ride thread. You can move this or I can make another one doesn't matter to me.

I also don't have these city lights in my headlights. I did however add some red LEDs into my projector housings for a "terminator/ sentenal" look.

[redlegacygt]

what type of HID's do you have in your projectors? By type i mean what brand? lol

[99gtlimited]

I saw you driving by lake whatcom the other day. That car is insane, even wider in person, beatiful. Didn't sound too bad either... Are you around Bellingham much?

[subie/legacy]

:shock:
Right click -save image as

[chaksq]

Wow, awesome custom bodywork. I went through the entire build album slideshow, it looks great.

[wiisass]

Now just lower it.

Just like an inch or so. Just get rid of the gap, tuck the tires a little. They should pull in nicely. If not, add a touch more camber and you'll be good.

Then it will look real awesome.

[hallowpoint]

Now just lower it.

Just like an inch or so. Just get rid of the gap, tuck the tires a little. They should pull in nicely. If not, add a touch more camber and you'll be good.

Then it will look real awesome.


word

[subiman2005]

Your car is my desktop background lol its sex!

[ouch1011]

The body work on the car is very nice, but the tires sticking out so far below the flares makes it look goofy IMO. Its only "hella flush" at the top, the tires stick out oddly everywhere else and kind of ruin the lines of the car.

Not my taste but it looks like you've done quality work, so kudos for that.

[2000gtb]

i dont think he is going for a flush look.. he is going for that aggresive look... me like

[jospgut]

your car is a dream... can you take pics of the rear bumper?, i wanne see how the looks are from the butt lol

[Girodisc]

I'll take some pics of it tonight and post up. I'll be having a legit shoot of it in a couple weeks once the turbo is in and I clean the engine bay up a bit.

[aurelius]

Another video is due!

[TGX4776]

mmmmm amazing. Can't wait to see those pics. Gonna get started on shooting cars this summer starting with my leggy.

[derrick_]

that car is just sick :]

[MarkSubi]

whats the tire and rims sizes for the front. cuz i've been wanting to put some deep dish with the tires stretched on my leggy

[Girodisc]

18x9.5 +15 on 245/35/18s

They are 5x114.3 Wheels I have 06 STi Hubs. Also you'll need flares or something to fit these as they would stick out a good 3" past the stock body. hehe

Johann @ Girodisc

[MarkSubi]

what if I just changed the alignment and had them pointing out?

[twistedautoworks]

highly unlikely

[MarkSubi]

hah alright.

[99gtlimited]

^^yeah and with that much camber you would be changing wheel bearings all the time, def a no go unless you make a widebody kit for your car as well

[twistedautoworks]

probably 15 degrees or something to fit those huge wheels

[MarkSubi]

yeah Im going to still do that style but probably only make the with of the rims 7 or 8

[twistedautoworks]

i'd say you can easily fit an 8" wheel under our fenders. I rolled mine and tuck 8.5's w/o much problem. The offset is +38 which is pretty aggressive.

[sauceyf4]

car looks amazing !

[subaru13]

Hey did you get your swap done on this because the other night well I was at work (costco in bellingham) I saw you roll through the parking lot and this thing sounded burly.

[Girodisc]

Hey all. So I spent this last weekend giving the Lego some much needed love. Decided to jazz up the engine bay a bit.

Painted some stuff
Move the batt to the trunk
Fuse box in the fender
Tucked the wiring a bit
Relocated the coil pack
All in all not bad for 2 days worth of work, $40 in materials

It went from this:

https://sl-i.net/FORUM/images/imported/2010/09/Lego01-1.jpg

To this:

https://sl-i.net/FORUM/images/imported/2010/09/Lego59-1.jpg

Also added some custom flare with some acrylic and our Laser Etcher.

https://sl-i.net/FORUM/images/imported/2010/09/Lego60-1.jpg

Johann @ Girodisc

[Girodisc]

Got the pics back:

https://sl-i.net/FORUM/images/imported/2010/09/sexy10-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/sexy09-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/sexy08-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/sexy07-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/sexy06-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/sexy05-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/sexy04-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/sexy03-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/sexy01-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/sexy11-1.jpg

Johann @ Girodisc

[Girodisc]

My 2 Girls:

http://i186.photobucket.com/albums/x223/badwagon/KristenPhotoShoot18.jpg

http://i186.photobucket.com/albums/x223/badwagon/KristenPhotoShoot16.jpg

http://i186.photobucket.com/albums/x223/badwagon/KristenPhotoShoot14.jpg

http://i186.photobucket.com/albums/x223/badwagon/KristenPhotoShoot11.jpg

http://i186.photobucket.com/albums/x223/badwagon/KristenPhotoShoot4.jpg

http://i186.photobucket.com/albums/x223/badwagon/KristenPhotoShoot8.jpg

Johann @ Girodisc

[Girodisc]

So I got an EZ30R I just need to finsh some other stuff before I can start working on it. I'll be working on it in a GC8 that came with it so it will be running before I make the swap. It has a hydra in it and it looks like the wiring is done but I am going to sell it and make my own harness with e Vi-Pec V88 I hear its better for what I want. Going to be doing some major custom work to the car in a couple months.

Moving the Engine/ Tranny down 1" and back 5" for better weight distribution.
Stich weld the entire car and re-coat the underside
Custom Headers
Custom True dual 2.5" GTR Style Exhaust (Same Tips)
Custom Intake Manifold w/ Dual Throttle Bodies
Custom V-Mount Style Intake System
Custom Brake Lines and complete Removal of the ABS

Possibly an 2009 Legacy Front end Swap I am still thinking about that one.

[httrdd]

Get you damn heels off that paint! Sexy!

Very nice photos and I have to sat that you have one of the best looking BDs that I have ever seen. I need to work my way up to that!

[httrdd]

holy shit look how meaty those shoes are! :shock:

[Cervantes]

the car looks awesome, love the rims and tires

[dplacencia]

Yeah this thing is sick!!!!

[jospgut]

wanna trade it for my wrx?? lol im gonna keep saying... your car is the most beautiful machine i have ever seen

[Airgne]

i might send my 01 gt to you for some work.

i would never allow her to put those heals on my car. your nuts.

[httrdd]

Can we make this a sticky?

[Yamazaki]

Good lord, this is nice! It reminds me more of an older Audi S4 than a Legacy.

[Reason]

Awesome, this thing is sick, no to the front end sway! Keep it looking like a 2nd gen.

[Girodisc]

I never get spotted on the Subaru Forums. I got spotted on the Audi and BMW forums more haha.

She was nice to the car. I have sctratchs on my back bumper anyways from putting shit in the trunk. Its a DD, its going to get dents, and scratches. Privided I have been lucky so far but I can't avoid it. I'll be repainted some of it this winter. I need to cut my rear fender arches a little higher. Also I want to get a second trunk to put a Voltex spoiler and maybe a second front bumper for the track.

Yeah I am still toying with the new front end. My bumper needs to be fixed, I need to get new headlights because one had a bunch of hairline cracks that showed up after we smoked them. So given how much I have to fix and replace I was playing with the idea. It would be a bolt on so I could always go back to 2nd gen or just make it to sell it or something. I have doen that before, making custom parts on my own car just to sell so I could buy the part I really wanted.

[DarkPhoenix]

Can we make this a sticky?


Ummm, am I the only sicko who questioned whether someone made it "sticky" already? At least their keyboard and monitor.

The car is sweet dude!

[Girodisc]

Pics are back up!

[MarkSubi]

Sexy!! it just needs to be dumped if you ask me :)

[Girodisc]

Nah I drive it everyday and I auto cross it. Besides if it was dumped I couldn't get into my driveway I already brush my exahsut as it is. :)

[BE-Fresh]

Congrats on the top scoob win!

[peugoby]

Congrats on the top scoob win!
x2. Well deserved!

[rallywagon]

This shit's cleeeeaaaannnnnnnn

[httrdd]

I was searching wide bodies so I figured I would bump this up!

[derrick_]

any updates on this beast?

[httrdd]

He updates all the time on Nasioc. Something something running Wrx engine with bigger turbo.... something something Ez30r swapping this week. :)

[derrick_]

He updates all the time on Nasioc. Something something running Wrx engine with bigger turbo.... something something Ez30r swapping this week. :)

wait...i thought that he already had an H-6 in there a long time ago, what happened to that? (i'm gonna have to log into nasioc and subscribe so that tapatalk picks it up hahaha)

still, tho, sick!

[xoSubieLegacyxo]

:smt022 Tis a sad day, and Nasioc confirmed the bad news. Girodisc is parting out the greatest legacy ever seen! :smt010

[httrdd]

Though he was only parting the celabru? Damn that sux!

[Bookem]

Link? I didn't see any part out or for sale threads by him?

[xoSubieLegacyxo]

This is what he posted on 11/15: Chapter 26 verse 17 says.....


So today was kind of a sad day for me. The car was posted up for sale but unfinished and predictably it didn't sell so I just got done stripping it down. Be on the look out for the for sale threads to be posted up tomorrow. Lots of good stuff.

Johann

here's the build thread on nasioc! http://forums.nasioc.com/forums/showthread.php?t=1840729&page=26

[98legwag]

That for sale was the Celaru. (I think)

[xoSubieLegacyxo]

No he said earlier on the last page that the Celaru was already sold.

[httrdd]

http://forums.nasioc.com/forums/showthr ... ?t=2277623 (http://forums.nasioc.com/forums/showthread.php?t=2277623)

One of his many part out threads. No mention of the Leggy.

[xoSubieLegacyxo]

I'm confused now. lol

[httrdd]

The celaru owner could not afford to go on with the car so decided to part it out. Trust me i follow him on NASIOC and Legacygt.com religiously. Lol. As soon as those fenders go up im jumping.

[xoSubieLegacyxo]

The celaru owner could not afford to go on with the car so decided to part it out. Trust me i follow him on NASIOC and Legacygt.com (http://Legacygt.com) religiously. Lol. As soon as those fenders go up im jumping.

oh. Well I apologize for blowing up the thread! Sounded like he was selling the legacy. I'd love to buy his rear bumper when he parts it out! lol

[Dead91silvia]

That is a clean BD! Any more updated pics?! Or an update on the motor swap?

[chuckthefuk]

So much WIN in this thread.

I have to say for personalizing and customizing this right here is super cool + the coil pack relocate.

https://sl-i.net/FORUM/images/imported/2010/09/Lego60-1.jpg

So now that being said.. how is your car a Legacy GT Spec B :-p

Cheers and once again congrats on your TopScoob feature. http://www.topscoob.com/2010/11/020-ult ... essel.html (http://www.topscoob.com/2010/11/020-ultimate-cruising-vessel.html)
-Chuck