Clutch guide?

[mr_g]

I want to swap out my clutch master cylinder and clutch slave cylinder for new ones. I have looked through the DIY forum and I couldnt find any, if there is then I probably missed it. Well if there is can someone post me the link and if not does anyone know where I can find a guide? Is this something thats hard to do and requires a professional mechanic to do? Any help would be great thanks.

[mike-tracy]

It's really easy. you unbolt the slave from the tranny (2 14mm bolts?) and go under the dash, remove the retaining pin and plastic piece (use needle nose to compress it then push it and the whole piece through), and take off the 3-4 nuts from the master cylinder that go thru the firewall.

You might need to remove the black box (the "torque box") coming off the throttle body for easier access.

there's a description on how to bleed it here:

http://northursalia.com/modifications/d ... lutch.html (http://northursalia.com/modifications/drivetrain/clutch/clutch.html)