bulldozer24s 99sus

[bulldozer24]

Hello everyone . I have a 1999 legacy sus. when i first got the car it was just to get around in but now its my pride and joy. i love this car so much and i love to work on it.so now what ive done to it.

Mod List
magnaflow axle back
jdm headlights
yellow fogs
custom built light bar
two 100 watt lights
ebay intake
perrin lwcp
painted calipers
painted all yellow caps in engine bay
20% tint all around
neon coil pack
suede door cards
suede roof
tinted tails
hella 500ff
custom switch panel
pioneer head unit and speakers
remote start
im sure theirs more but cant remember

Future mods
2.5 inch exhaust
new rims, don't know what yet thou


https://sl-i.net/FORUM/images/imported/2010/08/100_0244-1.jpg
https://sl-i.net/FORUM/images/imported/2010/08/100_0241-1.jpg
https://sl-i.net/FORUM/images/imported/2010/08/100_0239-1.jpg
https://sl-i.net/FORUM/images/imported/2010/08/100_0246-1.jpg

damn dude, clean!

diggin the light setup too!

[bulldozer24]

damn dude, clean!

diggin the light setup too!

thanks, I try to keep it clean but it's hard living on dirt road.

[Airgne]

looks good

['Buru in the Burgh]

How do you like that ebay intake, and what exactly is the purpose of the rigged padded tubing going over it? To keep it from bouncing around? I'm thinking about getting an eBay kit, found for for 19.99 + shipping.

Looks good dude!

[bulldozer24]

How do you like that ebay intake, and what exactly is the purpose of the rigged padded tubing going over it? To keep it from bouncing around? I'm thinking about getting an eBay kit, found for for 19.99 + shipping.

Looks good dude!

thanks, I like the intake, I can definetly feel the power increase. The padding is for filling the slight gap inbetween the heat shield and the hood so less heat can get through. Yea that's about what I paid for mine, it cost me 50 dollars for every thing which Is a whole lot less than the 100+ one I was going to buy from cosmo.

[bulldozer24]

i made a new switch panel for my light bar and green daylights with some left over diamond plate.

https://sl-i.net/FORUM/images/imported/2010/09/100_0308-1.jpg

https://sl-i.net/FORUM/images/imported/2010/09/100_0310-1.jpg

and a picture of my green daylights,

https://sl-i.net/FORUM/images/imported/2010/09/100_0322-1.jpg

[bulldozer24]

I got my new perrin lightweight pulley yesterday and got it installed today.
https://sl-i.net/FORUM/images/imported/2010/10/100_0335-1.jpg
https://sl-i.net/FORUM/images/imported/2010/10/100_0340-1.jpg

[Navi271]

Wow, can't believe I completely missed this car, awesome job! It looks so good.

How does the light weight pulley feel?

[bulldozer24]

Wow, can't believe I completely missed this car, awesome job! It looks so good.

How does the light weight pulley feel?

thanks, the pulley seems to have smothed everything out and I can feel a power gain in the lower rpms.

[bulldozer24]

Finally got my new hawk pads in today and got them installed along with the new rotors.

Out with the old

https://sl-i.net/FORUM/images/imported/2010/11/IMG_0302-1.jpg

In with the new

https://sl-i.net/FORUM/images/imported/2010/11/IMG_0341-1.jpg

https://sl-i.net/FORUM/images/imported/2010/11/IMG_0342-1.jpg

[bulldozer24]

the new pads are a great improvement over my old ones. im happy so far.

[TGX4776]

very nice.

[Danny-G]

I'm gonna have to follow this because I plan on building my '93 Legacy into a gen. one sus. Just that no one parts outbacks in my area so used parts are hard to find.

[gero808]

What is that box thing on the intake.

[bulldozer24]

What is that box thing on the intake.

The MAF sensor is the black box an the metal is a heat shield to help stop heat from the engine from getting to the air filter. You know the whole thing about colder air means more power.

If that's what your asking?

[gero808]

I was asking about the black box that you said was the MAF

[Dead91silvia]

I think I hate you! I wanted an SUS before I got my GT! That is a nice ride! Still want an SUS, but I love my GT too much now.

[bulldozer24]

Finaly got around to clean engine bay today and i also wraped all the wires for my lights to derice the look of it and while i was at it i re did the foam around the heatshield.

https://sl-i.net/FORUM/images/imported/2010/11/IMG_0343-1.jpg

https://sl-i.net/FORUM/images/imported/2010/12/IMG_0346-1.jpg

I also retinted the front windows, will post more pics after it gets a bath.

[Navi271]

Looks nice! I should do the same with my headlight wires.

[chuckthefuk]

Very nice you didn't go over kill with the green and I really like your airbox heat shield you should make DIY and post it with measurements and the process if you got time of course :-D

Very Clean!!! keep up the good work time to get her muddy!

-Chuck

[bulldozer24]

Very nice you didn't go over kill with the green and I really like your airbox heat shield you should make DIY and post it with measurements and the process if you got time of course :-D

Very Clean!!! keep up the good work time to get her muddy!

-Chuck

thanks, i might do a DIY if i get the time between work and school.

[subie/legacy]

Car is lookin good

[bulldozer24]

Got a brand new pioneer headunit from my friend for real cheap and got it installed today. It sounds so much better than the old one. i also got some speakers from him but havent installed them yet.

sorry foor the poor pic quality.

https://sl-i.net/FORUM/images/imported/2010/12/104_0003-1.jpg

[bulldozer24]

Got my remote start in and every thing is working fine. i might do a diy if any one wants it.

[chuckthefuk]

more info the better

[bulldozer24]

more info the better

not much more info other that it is an avital 4103 and was a pain to install. i might make a video of it but it wont be till later because its 6 degrees right now.

[bulldozer24]

I got all of the wires for the remote start wraped up to make it look as factory as possible.

Before
https://sl-i.net/FORUM/images/imported/2010/12/104_0004-1.jpg

All wraped up
https://sl-i.net/FORUM/images/imported/2010/12/104_0005-1.jpg

I also got tired of not having a handle on the sunroof so i made my own.
https://sl-i.net/FORUM/images/imported/2010/12/104_0011-1.jpg

[bulldozer24]

I was looking around in the engine bay and found a little puddle of steering fluid on the engine. i think its a o ring thats inbetween
the resivoir and the pump but im not sure.

If anyone knows the size of the o ring it would be helpful, if thats the problem.

[bulldozer24]

I got to put in my new pioneer speekers today that i bought off of a friend for 20 bucks for all four, and they were brand new, so i think i got a good deal. i also orderd some jdm side markers now i just have to play the waiting game. :neutral:

https://sl-i.net/FORUM/images/imported/2010/12/104_0022-1.jpg

[bulldozer24]

I got these in this morning and got them installed about an hour. I want to paint the black part but i cant seem to find the paint code for the door trim so if any one knows it and can tell me where to get some of the paint would be great.

https://sl-i.net/FORUM/images/imported/2010/12/104_0038-1.jpg

https://sl-i.net/FORUM/images/imported/2010/12/104_0035-1.jpg

[chuckthefuk]

Look at your strut tower where the VIN plate is. It should say Trim-Code and Color-Code.

My outback is code - 610

Any bodyshop can mix you paint just give them those codes.
-Chuck

[bulldozer24]

Look at your strut tower where the VIN plate is. It should say Trim-Code and Color-Code.

My outback is code - 610

Any bodyshop can mix you paint just give them those codes.
-Chuck


Ok thanks, I wasn't shure if that was it or not.

[R98LGT]

Did you wire your side marker lights?

[datdookie]

^^Still trying to figure out how to make the side marker light to stay on all day. Clean whip though

[bulldozer24]

yes, they are fully functional, they light just as the front corners light.

[bulldozer24]

Wow have i been busy the past few days. first off i had my steering pump go out on my way home on thursday which i replaced the next day then i got some black suede to replace the door fabric and i finshed today off with an oil change.

the door cards before
https://sl-i.net/FORUM/images/imported/2011/01/104_0042-1.jpg

and after
https://sl-i.net/FORUM/images/imported/2011/01/104_0043-1.jpg

I also made my own e-brake boot with some left over fabric.
https://sl-i.net/FORUM/images/imported/2011/01/104_0056-1.jpg

[bulldozer24]

Just won a neon coil off eBay hopfully it will get here by the end of the week.

[phi11]

I don't know why, but I LOVE THE SUS!!!!!

[chrish8r]

that color looks sick in there.....flows well with exterior color, if that was ur plan........

[bulldozer24]

well school was closed do to snow and i didnt have anything to do so dug out my old center console lid that was broken and wraped it in suede. im not sure if i like the look but it shure feels a whole lot better.

https://sl-i.net/FORUM/images/imported/2011/01/104_0064-1.jpg

[bulldozer24]

I don't know why, but I LOVE THE SUS!!!!!

I'll take that as a compliment

[sauceyf4]

I love the (BD chassis) SUS. Also great fab work! I wish we were neighbors. I really like the cold air system on your car.
is it 2.2 or 2.5?

[bulldozer24]

thanks its a 2.5

[chuckthefuk]

Fancy interior :-D

If you want some bling bling.. you can put almost any ebrake in with some persuasion of course. The 04' STi ebrake is a nice upgrade with its fancy stitching and chrome release button.

Also if you find a JDM center console those are very functional upgrades if your a tall person. The Arm rest is a double unit which raises the arm rest by an inch or two. and the cell phone resting spot in front of the shifter has a nice compartment that the USDM version does not.

Just options thats all.. Keep up the good work and I like the DIY you made.. Straight and to the point.

Cheers
-Chuck

[bulldozer24]

Thanks, I am planning on redoing the headliner with a black fabric so i can get all of the tan out of their. My only problem is the sun visors i just cant seem to find any that are black.

[chuckthefuk]

Spray fabric dye is a perfect solution. Spend the extra few dollars on the better brand at Auto Zone and you wont have any issues. 3x coats and 24 hours to cure. Then a light scrubbing with soap and water will remove any potential dye that will come off in the future :-D

Even in high-traffic areas the dye holds up like the door card insert.

Cheers and you can also make the "My Ride" in your signature a link instead of having the viewtopic url..

PM if you need HTML help or anything thats what I am here for.

-Chuck

[bulldozer24]

well the main part im concerned about are these plastic pockets. but i guess i could just paint them black.

https://sl-i.net/FORUM/images/imported/2011/01/104_0066-1.jpg

[bulldozer24]

Well my coil pack came in today and i got it installed in about 15 minutes.

before
https://sl-i.net/FORUM/images/imported/2011/01/104_0067-1.jpg

after
https://sl-i.net/FORUM/images/imported/2011/01/104_0068-1.jpg

[Baddog]

well the main part im concerned about are these plastic pockets. but i guess i could just paint them black.

https://sl-i.net/FORUM/images/imported/2011/01/104_0066-1.jpg

Let me know what you decide on the visors. I tried to do mine by wrapping it in the suede. But it didn't work so well only because you have so much tucking and trimming to do. And the part where the visor gets held to the car its a real PITA. I removed mine and it would never go back in.

[bulldozer24]

I changed the rear diff fluid today. I'm pretty sure it had never been changed before.

Also I have been looking at upgrading to ngk wires but I have tried to get the old ones off but everything I try they just won't come off. Any suggestions?

[bulldozer24]

well my parents traded in their old wagon and bought a new 2011 outback so i took the cargo tray and put it into mine.

https://sl-i.net/FORUM/images/imported/2011/02/104_0071-1.jpg

https://sl-i.net/FORUM/images/imported/2011/02/104_0073-1.jpg

[bulldozer24]

After dealing with road noise for about two year i finally got tired of it so i went to lowes and got this stuff called peel & seal. Its almost exactly what dynamat is. I got it on the front doors and rear deck for now.

Before
https://sl-i.net/FORUM/images/imported/2011/02/104_0074-1.jpg

After
https://sl-i.net/FORUM/images/imported/2011/02/104_0077-1.jpg

I also dyed the rear deck cover black because it was an ugly faded gray.

Before
https://sl-i.net/FORUM/images/imported/2011/02/104_0080-1.jpg

After
https://sl-i.net/FORUM/images/imported/2011/02/104_0081-1.jpg

I also got my stickers today! Thanks Reason

https://sl-i.net/FORUM/images/imported/2011/02/104_0094-1.jpg

[Navi271]

Cool stuff man


Also I have been looking at upgrading to ngk wires but I have tried to get the old ones off but everything I try they just won't come off. Any suggestions?
pliers? vice grip? idk, they have to come off somehow lol

[Baddog]

I like what youre doing. Our interiors are going to look the same. I dyed that back piece black. Doing my headliner is black suede. Did my door cards in black suede. I taped off the plastic covers on the visors and then used the fabric dye on it. Doesn't look half bad. if you want a picture let me know.

[bulldozer24]

Cool stuff man


Also I have been looking at upgrading to ngk wires but I have tried to get the old ones off but everything I try they just won't come off. Any suggestions?
pliers? vice grip? idk, they have to come off somehow lol

Thanks, I have tried all of that. they will turn but wont pop off. I'm not sure what to do now.


I like what youre doing. Our interiors are going to look the same. I dyed that back piece black. Doing my headliner is black suede. Did my door cards in black suede. I taped off the plastic covers on the visors and then used the fabric dye on it. Doesn't look half bad. if you want a picture let me know.

Thanks and yea i would like to see a pic of your visors if its not a problem.

[Baddog]

There are dark spots behind the plastic but it's not from the dye I used. I don't think it looks all that bad.

https://sl-i.net/FORUM/images/imported/2011/02/Photo0197-1.jpg

[bulldozer24]

There are dark spots behind the plastic but it's not from the dye I used. I don't think it looks all that bad.


It looks good to me ill have to try it some time. I wonder if there is an easy way in getting the dye behind the plastic?

[bulldozer24]

well it took forever but i finally got it done. I used two bottles of black rit dye to get it done. this whole process would have been a whole lot easier if the previous owner hadn't used self tapping screws that were completely inaccessible to attach the headliner. :smt013

here is a pic but it looks a whole lot blacker in person. i might need a new camera

https://sl-i.net/FORUM/images/imported/2011/02/104_0111-1.jpg

[xoSubieLegacyxo]

this is an awesome leggy!!!

[bulldozer24]

Got this front strut bar today, i only paid 11.50 for it and for that price i couldn't beat it.
https://sl-i.net/FORUM/images/imported/2011/03/104_0135-1.jpg

I haven't drove yet to see if there are any improvements but i will post up tomorrow with results.

[bulldozer24]

this is an awesome leggy!!!

Thanks it always helps to get positive feedback. I like how your car is coming along too.

[xoSubieLegacyxo]

thanks. where did you get that strut bar????

[bulldozer24]

ebay, i can get a link if you want it.

[bulldozer24]

After driving today with the new bar it handles so much better that before. I was extremely surprised at how much better it feels in the corners. I highly recommend this strut bar to anyone that doesn't have a strut bar or is on a limited budget because they are cheap.

[xoSubieLegacyxo]

ebay, i can get a link if you want it.

YES PLEASE!!!!!!

[bulldozer24]

ebay, i can get a link if you want it.

YES PLEASE!!!!!!

Here you go
http://cgi.ebay.com/ebaymotors/Front-To ... ccessories (http://cgi.ebay.com/ebaymotors/Front-Tower-Strut-Bar-Polish-Subaru-Impreza-94-01-WRX-_W0QQcmdZViewItemQQfitsZModelQ3aImprezaQQhashZitem51983e5665QQitemZ350446573157QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories)
Just make an offer you will get a quick response.

[xoSubieLegacyxo]

ebay, i can get a link if you want it.

YES PLEASE!!!!!!

Here you go
http://cgi.ebay.com/ebaymotors/Front-To ... ccessories (http://cgi.ebay.com/ebaymotors/Front-Tower-Strut-Bar-Polish-Subaru-Impreza-94-01-WRX-_W0QQcmdZViewItemQQfitsZModelQ3aImprezaQQhashZitem51983e5665QQitemZ350446573157QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories)
Just make an offer you will get a quick response.
Just bought one for $10.99! That will make turns 10X better!! haha

[bulldozer24]

ebay, i can get a link if you want it.

YES PLEASE!!!!!!

Here you go
http://cgi.ebay.com/ebaymotors/Front-To ... ccessories (http://cgi.ebay.com/ebaymotors/Front-Tower-Strut-Bar-Polish-Subaru-Impreza-94-01-WRX-_W0QQcmdZViewItemQQfitsZModelQ3aImprezaQQhashZitem51983e5665QQitemZ350446573157QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories)
Just make an offer you will get a quick response.
Just bought one for $10.99! That will make turns 10X better!! haha

Yea you will be pleased with it, I know i am and I drive on mtn roads every day.

[rallywagon]

I'm lovin your heat shield on the intake-
this is mine a lot simpler then yourshttps://sl-i.net/FORUM/images/imported/2011/03/200811_207507642595869_100000099053337_7-1.jpg-I wanna do what you've done though

[rallywagon]

Also I'm gonna order that front strut bar that you put a link for-I wanna paint it red, do you have any advice on that? is a normal spray can good for that with a clear coat?

[bulldozer24]

Thanks I wrote a DIY on the heat shield it is in the DIY section.

If you want to paint the bar red you will need to scuff it up first with some 500 or 600 grit sand paper so the paint will have something to stick to. Just do about three light coats of paint and two coats of clear any you should be fine.

[rallywagon]

Saweeeet thanks man

[rallywagon]

Got the Strut bar! Came in the mail today. Got it for $10.99
https://sl-i.net/FORUM/images/imported/2011/03/downsized_0331111329-1.jpg

[bulldozer24]

looks good man, I had to turn the bar upside down on mine because with the angles going up it hit the hood when i tried to shut it. but yours may be different.

[csweston]

Wonder if the rear will work as well.

[rallywagon]

No I had to do the same thing, just did it today-flip it upside down

[bulldozer24]

Wonder if the rear will work as well.

I think it works on wagons but not sedans.

[csweston]

Good to know, thanks! Ill try it out.

[Baddog]

I thought they work on the Sedan as well. I will test it out eventually.

[bulldozer24]

well it been a little while since I have updated but I have accomplished a few things.

First off i did a complete exterior detail and gave the taillights a few light coats of tint.
https://sl-i.net/FORUM/images/imported/2011/05/IMG_03551-1.jpg

Then I made a radiator shroud out of some scrap metal but i think it came out pretty good.
https://sl-i.net/FORUM/images/imported/2011/05/IMG_0347-1.jpg

I also went hybrid and it is so much better than that cone filter.
https://sl-i.net/FORUM/images/imported/2011/05/IMG_0360-1.jpg

I got some rally armors last week.
https://sl-i.net/FORUM/images/imported/2011/05/IMG_03611-1.jpg

And finally a pic with the parents new h6 outback
https://sl-i.net/FORUM/images/imported/2011/05/IMG_0364-1.jpg

[xoSubieLegacyxo]

what did you use to tint your tails?

[bulldozer24]

what did you use to tint your tails?

its vht

[Navi271]

Looks pretty nice! I also liked the hybrid intake much better than a cone filter.

That outback is massive compared to your car!

[Baddog]

What color green did you use to paint your underhood stuff? Been looking for a nice dark green without sparkles

[bulldozer24]

Looks pretty nice! I also liked the hybrid intake much better than a cone filter.

That outback is massive compared to your car!

thanks and yes the outback is massive compared to my car

And Baddog it is dupli-color and it is called deep jewel green, you can get it at advance auto.

[bulldozer24]

Well it all started about a week ago with a leak from the sunroof and i knew i had to get that fixed right away. I had tried to remove the headliner before but i just could figure it out why it would come down after removing all of the different trims. So I finaly got fed up with dealing with this and went at my headliner with a knife.

And this is what i found
https://sl-i.net/FORUM/images/imported/2011/06/100_0141-1.jpg

There were tons of these self tapping screws everywhere and when i finally got it down this what was left of the headliner.
https://sl-i.net/FORUM/images/imported/2011/06/IMG_0365-1.jpg

Well this leaves me searching for a new headliner so if anyone has one for sale please let me know

[airlia101]

I just got my own SUS about two months ago, and I like the things you're doing with yours!
Two questions, when you get around? First, what do you use for the exterior? And, (I'm new to most things automotive) what makes the latest intake hybrid? It seems to just skip the upper "box" - second filter? - that mine has stock.
Nice car! Good luck with the headliner.

[chuckthefuk]

I would re-wrap your head liner. reinforce it with wire on the other side.

[Dead91silvia]

I know where an SUS is at a yard... I bet I could get it cheap. Only problem is shipping the dumb thing..

[bulldozer24]

I just got my own SUS about two months ago, and I like the things you're doing with yours!
Two questions, when you get around? First, what do you use for the exterior? And, (I'm new to most things automotive) what makes the latest intake hybrid? It seems to just skip the upper "box" - second filter? - that mine has stock.
Nice car! Good luck with the headliner.

Thanks, and as for the the exterior im not sure what your asking for, detailing products? and the intake is just taking out the torque box and tubing. ill dig up a thread you should read through.

Edit: here you go
viewtopic.php?f=39&t=1479 (http://www.sl-i.net/FORUM/viewtopic.php?f=39&t=1479)


I would re-wrap your head liner. reinforce it with wire on the other side.

that's pretty much what i did, ill post up some pics later


I know where an SUS is at a yard... I bet I could get it cheap. Only problem is shipping the dumb thing..

thanks but im sure shipping would be outrageous, but thanks for offering.

[Tylerhartman]

ebay, i can get a link if you want it.

YES PLEASE!!!!!!

Here you go
http://cgi.ebay.com/ebaymotors/Front-To ... ccessories (http://cgi.ebay.com/ebaymotors/Front-Tower-Strut-Bar-Polish-Subaru-Impreza-94-01-WRX-_W0QQcmdZViewItemQQfitsZModelQ3aImprezaQQhashZitem51983e5665QQitemZ350446573157QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories)
Just make an offer you will get a quick response.

What front strut bar Will work with are Legacys?

[chuckthefuk]

lame..
http://www.google.ca/#hl=en&sa=X&psj=1& ... 67&bih=701 (http://www.google.ca/#hl=en&sa=X&psj=1&ei=LsgZT9DaF6ewsALNqbDNCw&ved=0CBwQvwUoAQ&q=site%3Asl-i.net+front+strut+bar&spell=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=94e15d34f3d9f3d4&biw=1067&bih=701)

[bulldozer24]

lame..
http://www.google.ca/#hl=en&sa=X&psj=1& ... 67&bih=701 (http://www.google.ca/#hl=en&sa=X&psj=1&ei=LsgZT9DaF6ewsALNqbDNCw&ved=0CBwQvwUoAQ&q=site%3Asl-i.net+front+strut+bar&spell=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=94e15d34f3d9f3d4&biw=1067&bih=701)

?

[chuckthefuk]

that was towards Tyler not you...

[bulldozer24]

well I have been getting lazy again and not updating this. I purchased a set of subaru steelies with general altimax arctic snow tires with 7k on them for 250 bucks! I thought it was a pretty good deal. I the proceeded to paint them safety orange, they dont look that bright in the picture because they are covered in dirt and salt. I made yet another light bar and mounted a set of hella 500ff.

pics!

https://sl-i.net/FORUM/images/imported/2012/02/IMG_0716-1.jpg

ski slopes in the background, wish my broad wasnt broke :-(
https://sl-i.net/FORUM/images/imported/2012/02/IMG_0714-1.jpg

https://sl-i.net/FORUM/images/imported/2012/02/IMG_0713-1.jpg

[xoSubieLegacyxo]

DUDE! MAKE ME A LIGHTBAR!

[04Legacy]

Nice im not the only one who has painted steelies. They look good and so does the car :smt023

[chuckthefuk]

steelies = curb king!

love em.. trash em..

[bulldozer24]

DUDE! MAKE ME A LIGHTBAR!

If i only had the time, once i get a new welder I may try to improve on the design over the summer and maybe sell some of them


Nice im not the only one who has painted steelies. They look good and so does the car :smt023

thanks!



steelies = curb king!

love em.. trash em..

got too love steelies!

[chrish8r]

Those steelies remind me of tractor tires but they are very original.... and those light bars look really nice

[bulldozer24]

Those steelies remind me of tractor tires but they are very original.... and those light bars look really nice

thanks, a few other people have told me the look like kubota wheels which i didnt even think about when painting them. the sad part is we own a kubota and i didnt make the connection :roll:

[xoSubieLegacyxo]

Those steelies remind me of tractor <span>tires</span> (http://motors.shop.ebay.com/eBay-Motors-/6000/i.html?_nkw=tires&_trksid=p5197.m570.l1313&_rdc=1) but they are very original.... and those light bars look really nice

Ressurecting threads? I think so :smt018 haha

[bulldozer24]

im sorry i dont update every day like you, :lol: jk. im just to lazy to get a camera out and upload pics.

But if your dieing for an update here is an engine bay shot with my new magnecor wires

This pic is a little old, since i have stripped the paint off the yellow caps
https://sl-i.net/FORUM/images/imported/2012/05/IMG_0715-1.jpg

[bulldozer24]

well I think i have taken this car as far as i want with the modding but its been a good run and this car. It has served me well but i think its time to move on to a new car.

I will be creating a vehicle for sale thread in a few days so keep your eyes open. For the first week after posting the thread i will be offering the car with most of the current mods but after that week I will start returning it to stock and will be putting it up for sale locally.

Also as a side note after i missed my first opportunity to buy a baja turbo 5 speed i have kicked myself everyday. so if any one knows any remotely close to western NC let me know.