92 GX liberty brake upgrade

[crazyjose]

I have a 92 non abs liberty that I am doing a turbo upgrade
to, I have fitted twin spot gtb calipers and the corresponding
brake booster and master cylinder. I am still contemplating
uprading to 04 wrx four spot fronts and two spot rears as i
am comtemplating track work and other fun stuff. will these
work with the current master cylinder, do i need to upgrade
anything else (proportioning valve), and i have b4 liberty
BBS 17 7JJ rims on it as well, will i have clearance probs
as well. I will be fitting dba rotors with the upgrade with
some good pads.


Any ideas

Adrian

[Sarra]

Wow, that sounds crazy.

As for the master cylinder, i'm not farmiliar with the Liberty. If a WRX master cylinder will fit, I'd suggest using it, as well as the proportioning valve.

The WRX has 17" wheels stock, so the rotors will fit under your wheels. However, I don't know if the WRX calipers will mount right... The worst you could do is pull a wheel, then the caliper/rotor and see if the WRX bits will fit. If the Liberty's rotors are the same offset, thickness, and diameter, you might be able to just pull the rotor and put a WRX rotor on without problem and keep the liberty calipers...