Part # Software - Subaru FAST-2 (US/EU/JAP) <------ Download

[chuckthefuk]

OK so to make this simple here is the software that Subaru dealerships use for their parts look-up.

Before we begine please visit Opposed Forces - Subaru Electronic Parts Interchageable Database (http://opposedforces.com/parts)
Opposed Forces is a free interchageable parts site devoted to Subaru USDM/EDM . Its quick and 98% correct during my 4+ years using it.

SLi Thread = viewtopic.php?f=14&t=15486 (https://sl-i.net/FORUM/viewtopic.php?f=14&t=15486)
http://sl-i.net/FORUM/ (https://imageshack.com/i/0v1yl1p)

Now moving on to FAST-2

Its called FAST-II and below are links to download it. There is also a tutorial on how to install the cd, run the program, and use the search feature.

http://sl-i.net/FORUM/

Before you start please read this:

1) This does not run on 64-bit Operating Systems. .. Deal with it..
---- VMware / Windows XP on Windows 7 64.
---- Or.. Microsoft Virtual PC (XP-Mode) works with Pro/Ultimate but there are guides to modify the install for Home Premium
2) This does not work for "most" CDM/Canadian VIN's... However that being said.. out of 15 CDM VIN's that I put in only 1 came up...
3) No BC / Gen 1 available :cry:
4) You can do either VIN search or MODEL search.


Download Subaru FAST-II (Parts Department Software)

All files are hosted on third party hosting websites. We only provide links!

~~~~~~~~~~~~~~ NOTE ~~~~~~~~~~~~~~~~
~~~~~~ YOU MUST USE THE CORRECT ~~~~~
~~~~~~ SOFTWARE FOR YOUR REGION ~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

USDM(USA) & EDM (EUROPE) English Font
MEGA.CO.NZ (https://mega.co.nz/#!61BU1JTK!ZryoyWkbGhDoZEQmNDnYL04Cz3xzPWrUzShPPVIK1Qg)
MEDIAFIRE.COM (http://www.mediafire.com/download/b5ouboy8uvmnteo/SUBARU_Setup_EU.zip)

JDM (JAPAN) Japanese Font / Characters
MEGA.CO.NZ (https://mega.co.nz/#!XwpUjKhR!dKkaMCUToW74iioQmLDcv3OQTN8n5yJs3kU1W-TPLjQ)
MEDIAFIRE.COM (http://www.mediafire.com/download/7r1w4agaog5l9wt/SUBARU_Setup_JP.zip)


Model Breakdown / Naming Codes
http://sl-i.net/FORUM/

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

USDM

USDM EPC 2008.11 - 10811USSF
MEGA.CO.NZ (https://mega.co.nz/#!Swo1DThI!FJ7GZw7f8ZW1tYWEZH8cGAW_C10SkgLrtHCf13iBP3w)
MEDIAFIRE.COM (http://www.mediafire.com/download/86q8yskornvvd07/USDM_EPC_2008.11_-_10811USSF_(sl-i.net).zip)

USDM EPC 2010.03 - 21003USSF
MEGA.CO.NZ (https://mega.co.nz/#!zpwRWaCb!GJ4_J3AmgjFMXGNI9CBMYAXnjERI7I7nPtjQdosAPZw)
MEDIAFIRE.COM (http://www.mediafire.com/download/hmhtk8ho981wv6k/USDM_EPC_2010.03_-_21003USSF_(sl-i.net).zip)


EDM

EDM EPC 2008.11 - 10811LRSF
MEGA.CO.NZ (https://mega.co.nz/#!C1RViKJK!O0SGfkEgHW8oie2t4xzfkBuoTaVlqZNybnHiqdQicpY)
MEDIAFIRE.COM (http://www.mediafire.com/download/tlcx6t71c1am41t/EDM_EPC_2008.11_-_10811LRSF_(sl-i.net).zip)

EDM EPC 2012.05 - 21205LRSF
MEGA.CO.NZ (https://mega.co.nz/#!y44l3QoI!1rKcXries_BD4gcta3NSpeAxw57fxtf7Zu5Ij1uIEnM)
MEDIAFIRE.COM (http://www.mediafire.com/download/qfyxcql85yihdmy/EDM_EPC_2012.05_-_21205LRSF_(sl-i.net).zip)

EDM EPC 2012.07 - 31207LRSF
MEGA.CO.NZ (https://mega.co.nz/#!e0hSibLa!JdRM9s3f_jN0PylUF5OUat7qDvumrMX_I32xoin-QgM)
MEDAIFIRE.COM (http://www.mediafire.com/download/ibfq43hqqqvzian/JDM_EPC_2007.04_-_20704SF_(sl-i.net).zip)


JDM

JDM EPC 2010.04 - 21004SF
MEGA.CO.NZ (https://mega.co.nz/#!SkZWiCIT!YX_PwS2QAYC9n_jHGtpYkShLHLEh6rN1iijbz1V9d-Q)
MEDIAFIRE.COM (http://www.mediafire.com/download/1g13xdd7xy3cyvx/JDM_EPC_2010.04_-_21004SF_(sl-i.net).zip)

JDM EPC 2010.07 - 10710SF
MEGA.CO.NZ (https://mega.co.nz/#!SoQFSS7T!OIQUNlMaPT82NNYh4g3oaxV9xlsvSbiiS3SdaLCo8vM)
MEDIAFIRE.COM (http://www.mediafire.com/download/ik6ddik04745lg7/JDM_EPC_2010.07_-_10710SF_(sl-i.net).zip)

JDM EPC 2011.08 - 31108SF
MEGA.CO.NZ (https://mega.co.nz/#!z0InjAxa!P9SaZBoUzQX1oYcKn3UHiip5hUhIoUOxtJmoKO1YH7Q)
MEDIAFIRE.COM (http://www.mediafire.com/download/ik6ddik04745lg7/JDM_EPC_2010.07_-_10710SF_(sl-i.net).zip)

--------------------------

Download DAEMON Tools Lite
Link -> http://www.filehippo.com/download_daemon_tools/
Install.. Nothing fancy, just all the defaults besides "the crappy toolbars and what-not"

Mounting the .ISO file:
Once DAEMON Tools Lite is installed you should be able to mount the iso file that you downloaded earlier.

http://sl-i.net/FORUM/ (http://img13.imageshack.us/i/m1chooseimage.jpg/)
Left Click the DT icon and select the virtual cdrom created.

http://sl-i.net/FORUM/ (http://img191.imageshack.us/i/m2choosenimage.jpg/)
Select the .ISO file.

.ISO file mounted and ready to use.

Install FAST-II:
Navigate to the virtual CD-ROM drive letter.
Use "My Computer" and double click on the CD labeled "21003USSF".

http://sl-i.net/FORUM/ (http://img836.imageshack.us/i/i1setupexe.jpg/)
Navigate to CD-DRIVE**\sffastpg\win\
Double click on "setup.exe"

The next steps are simple. Just click ok and next and finish.. All default; nothing fancy just simple install.
http://sl-i.net/FORUM/ (http://img18.imageshack.us/i/i3next.jpg/) http://sl-i.net/FORUM/ (http://img29.imageshack.us/i/i3next1.jpg/) http://sl-i.net/FORUM/ (http://img29.imageshack.us/i/i3next2.jpg/) http://sl-i.net/FORUM/ (http://img19.imageshack.us/i/i3next3.jpg/) http://sl-i.net/FORUM/ (http://img6.imageshack.us/i/i3next4.jpg/) http://sl-i.net/FORUM/ (http://img689.imageshack.us/i/i3next5.jpg/) http://sl-i.net/FORUM/ (http://img88.imageshack.us/i/i3next6.jpg/)

Setup CD Location:
--> Here you can select multiple FAST-II CD's. You can load USDM / EDM and JDM.

http://sl-i.net/FORUM/ (http://img641.imageshack.us/i/cd1setupcd.jpg/)
Select option 2). from the list [Setup]

http://sl-i.net/FORUM/ (http://img195.imageshack.us/i/cd2choosecd.jpg/)
Select the Browse button for 1st CD ROM

http://sl-i.net/FORUM/ (http://img441.imageshack.us/i/cd3choosencd.jpg/)
Browse to the mounted .ISO file. This is where you can choose which version or region of FAST-II you can use. You can repeat this step
and load other .ISO files for the 2nd, 3rd & 4th CD-ROM for FAST-II to use.

http://sl-i.net/FORUM/ (http://img266.imageshack.us/i/cd4choosencd.jpg/)
CD location set. Press OK.

VIN search:
https://sl-i.net/FORUM/ (http://img263.imageshack.us/i/r1openprog.jpg/)
Select option 1). from the list [Retrieve Part Number]

http://sl-i.net/FORUM/ (http://img810.imageshack.us/i/r2open.jpg/)
FAST II is open. Notice all of the fields are blank and most of the tool bar options are greyed out..

http://sl-i.net/FORUM/ (http://img151.imageshack.us/i/r3vin.jpg/)
Click on the VIN field and type in your VIN number and press the ENTER key.

http://sl-i.net/FORUM/ (http://img8.imageshack.us/i/r4vinentered.jpg/)
Note all of the fields are now populated with their respective information.

Model search:

Note:
1) Anything in RED is NOT a valid option. You will get an error if you try to use that combination.
2) You dont need to fill out all of the fields. You can be general.

https://sl-i.net/FORUM/ (http://img263.imageshack.us/i/r1openprog.jpg/)
Select option 1). from the list [Retrieve Part Number]

http://sl-i.net/FORUM/ (http://img440.imageshack.us/i/ms1choosemod.jpg/)
Click the ? and select your model.

http://sl-i.net/FORUM/ (http://img833.imageshack.us/i/ms2chooseyear.jpg/)
Choose your year.

http://sl-i.net/FORUM/ (http://img341.imageshack.us/i/ms3choosestyle.jpg/)
Choose your body style.

http://sl-i.net/FORUM/ (http://img696.imageshack.us/i/ms4chooseengine.jpg/)
Choose you engine.

http://sl-i.net/FORUM/ (http://img405.imageshack.us/i/ms5choosedrivetype.jpg/)
Choose your drive type. FWD / AWD

http://sl-i.net/FORUM/ (http://img217.imageshack.us/i/ms7choosetrim.jpg/)
Choose your trim.

http://sl-i.net/FORUM/ (http://img196.imageshack.us/i/ms8choosesusp.jpg/)
Choose your suspension.

Lets Find A Part Number:
Now that we have our car identified, lets find some part numbers. This process is how to find a part "Visually" rather then directly.

Select the "Illustrated Index" option from the tool bar.

http://sl-i.net/FORUM/ (http://img155.imageshack.us/i/u2category.jpg/)
Select the category you would like to view. You can also choose multiple categories if you want.

http://sl-i.net/FORUM/ (http://img249.imageshack.us/i/u3select.jpg/)
Select the item you want by left clicking on it. Use the tool bar "Jump" option to navigate between pages.

http://sl-i.net/FORUM/ (http://img718.imageshack.us/i/u4choose.jpg/)
Select the "Illustrations" option from the tool bar.

http://sl-i.net/FORUM/ (http://img407.imageshack.us/i/u5diagram.jpg/)
WOW look at the diagram.. :smt015

http://sl-i.net/FORUM/ (http://img839.imageshack.us/i/u6selectqtyenter.jpg/)
Move the "LEFT & RIGHT" keys to select the part you would like. Once you hit Enter you can set the Quantity (QTY) and then press enter.

http://sl-i.net/FORUM/ (http://img641.imageshack.us/i/u7selected.jpg/)
Once selected it turns RED!

And now the MAGIC button (F5) or in the toolbar "Translate" which is some SUBARU secret code for PART NUMBER!

http://sl-i.net/FORUM/ (http://img638.imageshack.us/i/u9done.jpg/)
And there you have it! A freaking part number for a EZ30D seal :smt017 You can see how this system works.


Parts Description Search.
I'm not going to go into much detail.. The system works like this: 1st Category is the main search. 2nd is to specify and 3rd is if you need even more detail to describe your search.

So in this example I will do something as simple as 1st Category "HEAD" and this will give me all the parts associated with the word 'head'. So items like bolts, valves, rockers, etc. will come up in the search..

Another example: 1st Category "BRAKE", 2nd Category "PLATE" and this should bring up a list associated with Backing Plates.

http://sl-i.net/FORUM/ (http://img607.imageshack.us/i/p1partnumbersearch.jpg/)
Select F3 or Toolbar "Part Name"

http://sl-i.net/FORUM/ (http://img43.imageshack.us/i/p2category.jpg/)
Categories.. Type in what you want. Keep it simple.. BRAKE / HEAD / RADIATOR

http://sl-i.net/FORUM/ (http://img40.imageshack.us/i/p3codesearch.jpg/)
All items associated with the word "HEAD". Left click to add QTY. Right click to subtract QTY.

http://sl-i.net/FORUM/ (http://img6.imageshack.us/i/p3chooseacode.jpg/)
Part highlighted. If you want a parts diagram of your item, click the "illustration" button (1). If not you can click "Translate" (2) and you're done.

http://sl-i.net/FORUM/ (http://img607.imageshack.us/i/p4illustration.jpg/)
Parts diagram: Your part is highlighted in "GREEN" and again you can move left and right and choose a part.

Done :-D

[jamal]

this is exciting. thanks a lot!

[jamal]

also it seems to be working fine for me in 64 bit win 7

[anothernord]

Wow, another amazing post by teh Chuck!

[chuckthefuk]

also it seems to be working fine for me in 64 bit win 7


I get the same runtime error in Win7-Ultimate-x64

Hmmmm

-Chuck

[jamal]

unfortunately the jdm stuff isn't working quite right- it froze up on me and is missing the 1st gen impreza.

[chuckthefuk]

I was waiting for Yamazaki to confirm this... try Win32

[Yamazaki]

I was waiting for Yamazaki to confirm this... try Win32
The Japanese software totally works perfectly. But until I get a model code (full, it doesn't accept partials) for a 1st gen, I cannot confirm that it doesn't have the stuff for them. Without my books, I can only write in all but the last two characters: BC5A4??

[jamal]

should be G10, right? It is in the us software.

[Yamazaki]

should be G10, right? It is in the us software.
Considering that G11 and G12 are Imprezas in the J-spec program, I doubt it.
I just tried it anyway, and it doesn't exist....

And that isn't the model code I was talking about....

[Wiscon_Mark]

I get the same runtime error in Win7-Ultimate-x64

Hmmmm

-Chuck

Did you try the compatibility mode program? That's always worked for me with older programs & games.

[chuckthefuk]

Yes :-(

[csweston]

PC only? :(

[elislider]

you rock. i just found this thread

EDIT: except megaupload is gone now, so any chance this stuff can get rehosted?

[elislider]

would a newer version contain all content on previous versions? or did they start dropping older stuff as time went on?

[chuckthefuk]

Good question... I can not answer that..

[mike-tracy]

I don't know either but I do know that my local dealership is dropping support for vehicles >20 years old in their software - ie. they have to refer to the paper copy parts list for my 91 Legacy starting this year

[elislider]

in a pinch, i'm ok with that, though i do use the parts referencing frequently on opposedforces.com -- but i also have dealer versions of all the physical paper manuals for 95-98 legacy, 93-99 impreza, and a few others in the 00+ range.

after much fiddling I was able to get one version of FAST2 installed. its tricky to use and I get lost easily in the program, but it does have lots of parts info not available on opposedforces.com

now i just need to get parallel installs for USDM/JDM/EDM :)

[chuckthefuk]

Function keys are much faster... You get the hang of it .. think of it like AS400 systems.. tab/F-this...

I should really post all the links soon.. Just lazy

[elislider]

i can mirror them for you :)

[chuckthefuk]

Deal. Please PM and join my dropbox.

[chuckthefuk]

I have been really really busy with getting the tshirts shipped out and my track car but but I managed to finally finish the download links. I have had lots of request recently for these files so here you go SLi. DO NOT LEECH!!!

Below is a list of *.ISO files that EPC FASTII uses. I am still missing a few so if you have them.. PLEASE send them to me.

iso broken down like this
10311LRSF
[disc][year][month][region]
[...1.][..03.][...11..][LRSF]


EUROPE:
10311LRSF
10811LRSF
20505LRSF <-- missing
20609LRSF
20701LRSF
20707LRSF
20709LRSF
20711LRSF
20803LRSF
20805LRSF
20809LRSF
20811LRSF
30901LRSF <-- missing
30907LRSF
31001LRSF <-- missing
31003LRSF
31005LRSF
31101LRSF
31105LRSF
31201LRSF

USA
10811USSF
20505USSF <-- missing
20603USSF <-- missing
20711USSF
20803USSF
20805USSF
20809USSF
20907USSF
21001USSF
21003USSF

JAP
10704SF <-- missing
10710SF
20704SF <-- missing
20710SF
21004SF
30706SF <-- missing
30710SF
30902SF
30910SF
31004SF

-Chuck

[elislider]

when it comes to the "disc #" part (first digit of the filename) do you need a disc 1, a disc 2, and a disc 3 (example, the most up to date version of each)? or do you just need the newest disc? it would make sense they would release a disc and update it for a while, then release another disc, update it for a while, then another, etc in iterations. but idk if thats how it works. i guess my question is: what is the significance of the "disc number" digit?

[elislider]

followup question: is there a way to use the jdm catalogs in the english program? i tried and it doesnt recognize them, so i installed the japanese program separately and it will import the jdm catalogs, but i have no idea what i'm clicking on

[96LegacyWagon]

which version should I get for my 1996 subaru legacy wagon L?

[chuckthefuk]

any usa

[elislider]

chuck, didnt answer my questions.. :)

[chuckthefuk]

followup question: is there a way to use the jdm catalogs in the english program? i tried and it doesnt recognize them, so i installed the japanese program separately and it will import the jdm catalogs, but i have no idea what i'm clicking on

no idea. i cant read japanese so I left these for Yamazaki to look into.

[elislider]

ah, touche

[Yamazaki]

Sorry about that. I just tested them to make sure they work. And they do. I didn't download the English one so I don't know how to merge them.

[elislider]

what i have is the english version of the software loaded up with EDM and USDM isos (at least, they appear to be loaded, havent done any VIN lookups yet) and then i have the japanese version of the software loaded up with the JDM ISOs, and i tested a jdm vin and it works. however, i have no idea what i'm clicking on really, because the japanese app is all japanese (and its actually not even japanese for me, its just random unicode symbols and junk because apparently my windows wont display japanese properly)

so the question remains, is there a way to look up the JDM isos in the english program?

[fullCircling]

dude you are awesome! downloading later...

so this wont run in windows7 64 bit? does win7 have a compatibility mode that you can run it in like winXP did?

[rkrenicki]

boo.. Dropbox account has been disabled.

[chuckthefuk]

You can blame the leechers... 3 days is the temp suspension....

at the moment this is the only way for me to provide large files.

If you really need a certain iso please PM.

-chuck

[chuckthefuk]

boo.. Dropbox account has been disabled.

backup!

[Cleber-Brasil]

Hi, it is my first message in the Forum.

See the link: http://share.subiefiles.com/share/apps/

Read the manual (pdf) for instal the program and setup (load) the year before use.

I need the USDM EPC 2011, 2012 and 2013. You can me?

[chuckthefuk]

Send me a message and I can see what I can do for you.
-Chuck

[Cleber-Brasil]

Send me a message and I can see what I can do for you.
-Chuck

Hello chuckthefuk,

I buy a new car in Brasil (Subaru Legacy 2.0 CVT - 2011) and a want to install any parts to upgrade the operation. The problem is this car was produced in Japan and the part numbers not same in USA.

I use the fast 2 for localize the compatible parts in USA. My VIN code is: JF1BM5LC2BG-023799

I want to buy this parts:

1. Swith Satellite (83154AJ090 or 83159AJ020 - I don't know what's diference between part's number) (http://www.ebay.com/itm/ws/eBayISAPI.dl ... rid=229466 (http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=360548125048&item=360548125048&lgeo=1&vectorid=229466))

2. SUBARU LEGACY AND OUTBACK 2010-13 AUTO DIMMING MIRROR WITH COMPASS AND HOMELINK (http://www.ebay.com/itm/SUBARU-LEGACY-A ... 9f&vxp=mtr (http://www.ebay.com/itm/SUBARU-LEGACY-AND-OUTBACK-2010-13-AUTO-DIMMING-MIRROR-WITH-COMPASS-AND-HOMELINK-/121057146527?pt=Motors_Car_Truck_Parts_Accessories&hash=item1c2f91769f&vxp=mtr))

3. Switch Assembly Combination Turn Dimmer (whit Fog lamp switch and Auto function) - 83195AJ060 (Japan code)

4. Sensor Sun Load or Automatic Light sensor: 73730AG010 (Jp) or 84088AJ000 (USA) - See: http://legacygt.com/forums/showthread.p ... 95473.html (http://legacygt.com/forums/showthread.php/anyone-seen-tsb-12-136-12-automatic-headlight-sensor-repair-195473.html)

I fear to buy this parts and dont work in my car because the wire whip.

Thanks for your attention.

[chuckthefuk]

email me please. chuckthefuk@sl-i.net

I have some info for you


Search Results for 83154AJ090

SWITCH AY SATELLITE
Make: Subaru | New Part#: 83159AJ020
List Price: $169.20
Your Price: $123.85

[Silver_GDA]

the download links are not working. could you update please?

[chuckthefuk]

Updated

[Andy_Mac]

Any chance In getting the part numbers for the s401 rear brake backplates? Chances are slim they'll be on there but worth a shot. Tried using it myself but me and my computer can't read Japanese.
Cheers

[rkrenicki]

Andy_Mac The S401 brake backplates are STI part 2670466000 and 2670466010, however they are restricted parts and cannot be purchased without proving that you own an S401.

[Andy_Mac]

Cheers. Yea had heard they are restricted but was hoping partsouq might still have them. Appears not though. Are those standard subaru style part numbers? Don't they normally always have letters in thrm aswell?

[rkrenicki]

They are STI part numbers, but for some reason do not have the ST prefix that most other STI parts have..

You *might* have some luck with japanparts.com, they seem to be able to get some restricted parts for some models, so perhaps they have someone who works there with those models. It cannot hurt to try.

[Andy_Mac]

Yea they list their brembo conversion kit as having the rear backing plates so unless they have custom ones made they must be coming from sti. Would just grab that if the price wasn't horrendous.

On a side note, is there any way of getting the jdm cd's to work in english. Have us working in us program and jap in jap program but can't interchange to get jap cd's in english. Surely there's a way since the guys at subaru dealerships can get around it without too much trouble?

[Yamazaki]

I can ask in-laws in Japan if my owning an S401 permits me to order through them... but I wouldn't hold my breath.

[rkrenicki]

I had forgotten that STI sells the Brembo kit for the BE/BH. Its retail price is 615,600¥.. or just shy of $6000USD. It says it does come with the backing plates, but I cant seem to find them on Japanparts.

The backing plates by themselves are 18,000¥ each.

[rkrenicki]

On a side note, is there any way of getting the jdm cd's to work in english. Have us working in us program and jap in jap program but can't interchange to get jap cd's in english. Surely there's a way since the guys at subaru dealerships can get around it without too much trouble?

I have tried to do this a half dozen times, all without success. I have a virtual machine set up with a copy of Windows XP in Japanese just for the Japanese FAST application, as even running the application on an English version of windows does not render everything correctly.

The general market (which includes Australia/New Zealand) models are much more similar to Japanese models, so their FAST will list many "Japanese" parts.

[rkrenicki]

I need to seriously update and simplify this whole thread. I am putting it on my COVID "to-do" list.