BE/BH Folding Mirrors instead of Heated Mirrors Wiring?

[Matty2Hotty]

Looking for the JDM wiring for the folding mirror switch, I
See the pins are different and the JDM has 1 extra pin on the switch. I have heated mirrors so i figure I can use the power off those pins(??) wires to wire into the JDM switch. I also would think I don't need wires since I have the heated wires. Some info anyone?

[phi11]

we'll, I know on the BD/BG/BK that it's an extra TWO wires for the folding part. (to each mirror)
which switch do you have?
(I've seen 2-3 different ones)

[Matty2Hotty]

Here are some pictures, I have 1 extra pin, some pictures USDM vs JDM
https://sl-i.net/FORUM/images/imported/2011/02/e68105c3-1.jpg

US mirror Switch (Needs to be rotated 180degrees to match the JDM pinout picture)
https://sl-i.net/FORUM/images/imported/2011/02/d3a75b3a-1.jpg

JDM mirror Switch
https://sl-i.net/FORUM/images/imported/2011/02/cce7b917-1.jpg

[Matty2Hotty]

The US switch in my picture... Bottom 2nd to the right pin is missing on the JDM switch and there is 2 pins on top and bottom on the far right of the JDM switch. The little box both has 4 pins on the switches.

[Matty2Hotty]

Anyone with at least the US Heated Mirror switch wiring diagram? Someone has to have the online manual.

[Caboobaroo]

Sorry to bump an old thread but I'm currently in possession of some JDM power folding heated mirrors and want to install them on my '04 Outback. I heard the JDM bases need to be swapped out with USDM bases but will the USDM shells work with the motors? Did anyone ever figure out the wiring or might possibly have a wiring schematic for the JDM cars with power folding heated mirrors?