Rally Armor universal basic install ?'s

[beeda]

So I have a couple questions on the install of these flaps. I have a 01 BH. Can you just screw them in all four? or do you need to make mounts on the back tires.

[chuckthefuk]

By design regardless of the trim level your purchased your car has 3 holes that are ment for factory mud gaurds.

When you buy the R/A universal flaps they have no holes so just mark the spots drill a hole in the flap and get some screws from your local h/w store or go to subaru if you want to be fancy about it.

Also these flaps don't work well with the factory mud guards.... so its either 1 or the other.

-Chuck

[anothernord]

I installed my RA's on top of the stock mudflaps, and they work great.

[chuckthefuk]

maybe I am thinking of the JDM aero guards..

Either way heres a DIY for a GC but its the same on all models.

http://www.northursalia.com/modificatio ... flaps.html (http://www.northursalia.com/modifications/exterior/stiflaps/stiflaps.html)

-Chuck

[beeda]

Thanks for the answer. How bog of a space should there be between the bottom of the flap and the ground?

[chuckthefuk]

Its up to you but more then 3" for sure... Remember these will take a beating if you fly over speed bumps with low clearance flaps...

Compare other cars that have them mounted and just use good judgment.

-Chuck

[xoSubieLegacyxo]

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash2/77099_458414357475_652632475_5823616_6347370_n.jpg

a couple of zippy screws and my R/A universal mud flaps are good! Trust me they are so cheap just buy another set and replace them when they go bad!!!