PDA

View Full Version : 3rd Generation Sedan (BE) LGT02's 02 BE LGT


LGT02
03-16-2011, 09:10 PM
there it is.. my little baby

simple mods done:

- Cross drill brakes 4 corners and for sure red painted calipers
- 17x8.5 gun metal wheels
- Custom Cai
- Custom exhaust, catless, resonator less, 2.75 from headers to magnaflow..
- Throttle body spacer and coolant line bypass
- grounding kit
- fonctional hood scoop wrx 04
- rear wing wrx 04
- Custom gutter to protect all electronic around the TB
- Cluster and key ring color change from aqua to red :P


https://sl-i.net/FORUM/images/imported/2011/03/IMG_1514-1.jpg

https://sl-i.net/FORUM/images/imported/2011/03/IMG_1515-1.jpg

https://sl-i.net/FORUM/images/imported/2011/03/IMG_1544-1.jpg

https://sl-i.net/FORUM/images/imported/2011/03/IMG_1547-1.jpg

https://sl-i.net/FORUM/images/imported/2011/03/IMG_1551-1.jpg

https://sl-i.net/FORUM/images/imported/2011/03/IMG_1552-1.jpg
chuckthefuk
03-17-2011, 10:32 AM
welcome to sli I like your engine cover
LGT02
03-17-2011, 03:29 PM
thks.. you can see it in diy section.. as i say overthere.. its fully a fuction over fashion thing.. made in an hour during the rainy days of fall..
and it do the job just fine.. all the water drop in the corners so eachside of the tranny, far from any electronics.
Huffer
03-17-2011, 04:18 PM
Update your profile with your location...and welcome!
LGT02
03-28-2011, 05:01 AM
Last ones..

https://sl-i.net/FORUM/images/imported/2011/03/IMG_1797-1.jpg

https://sl-i.net/FORUM/images/imported/2011/03/IMG_1801-1.jpg

https://sl-i.net/FORUM/images/imported/2011/03/IMG_1805-1.jpg
cluster color swap set at min dim.
https://sl-i.net/FORUM/images/imported/2011/03/IMG_1810-1.jpg
Guig'z
04-02-2011, 10:38 AM
Nice car! how did you do the throttle body spacer and the CAI? Does the trottle body makes a big difference?
rougeben83
04-02-2011, 12:11 PM
close up of the hood please.
Guig'z
04-02-2011, 03:23 PM
Oh and what rotor did you used? And thanks for the grill to haha! Been running it since we met!
LGT02
04-02-2011, 03:44 PM
Nice car! how did you do the throttle body spacer and the CAI? Does the trottle body makes a big difference?

TB spacer was drill out of a 3/4 6061 plate.. quite simple if your a machinist and i didnt notice a BIG difference,, imade this mod at the same time that i clean/polish my TB and bypass the coolant line of the TB.. so i dont know that much but there is a litttle diff..

I made my cai from many part hidden under the workbench.. old short ram.. pieces from 350z and 4L cherokee and tadaaaaaaaaamm

Rotors are ebay cheapest ones.. was really time to change and i decide to put 225$ in a test.. and... they are breaking me for 2 years and a half so i never change them.. but caution..Slippery when wet..!!! hahah
LGT02
04-03-2011, 05:24 AM
https://sl-i.net/FORUM/images/imported/2011/04/IMG_1827-1.jpg

https://sl-i.net/FORUM/images/imported/2011/04/IMG_1829-1.jpg