Installed Phenolic spacers now no spark?

[ScaryFatKidGT]

Put on a phenolic spacer and now I don't have spark. I checked all the wires and they all seem ok, the only one I unplugged was to the MAF and all the vacuum hoses are on. I checked all the wires with an OHM meter and they all were good no fuses blown. I did have the spark plug wires on the wrong terminals when I originally tried to start it, could I have blown my coil pack?

[Baddog]

Let me know if you notice the difference. Once you get her going.

Check your fusible link? But you would have no power at all.

[ScaryFatKidGT]

Yeah shes got power turns over just no spark.

[mike-tracy]

Did you ever do the neon coil pack? If so your harness could have been messed up by pulling the intake manifold.

[ScaryFatKidGT]

^Nope, but I'm guessing that's might of what happened but how do I go about fixing it?

[ScaryFatKidGT]

It was the plug in the crank sensor. It Feels like a little more torque? not much also seems louder. The IM is defiantly 30+ degrees cooler.

[4n70n1n0]

When I did the spacers i didnt notice much, but since now your intake manifold have longer runners it should result in more torque

I cant say it was alot cooler, but after a 1 hr drive it was cooler to the touch then it used to be. Only thing I regret is dealing with the EGR tube, but i no longer own the car i dont have to worry about it and i dont know if ima do the spacers again on the next one