JDM Projector Adjustment

[mycargoesvroom]

My high beams are all out of whack and I can't seem to get them to sit right. I was outside screwing with my headlights last night and I noticed there are 4 adjustment screws on the back. I know the outside top controls the lows, inside top controls the highs (?) but what do the others do? I wrenched on one for a few seconds but I didn't see anything happening.

[httrdd]

I believe there is a thread for this. Let me find it.

[HeresMyMind]

there are 4 adjustments for each headlight.

2 for the lows and 2 for the highs.

on the low beam section the Top adjuster , adjusts the height of the output, the Bottom adjuster moves the output (the step) left and right

on the high beam the Top adjuster adjusts left and right, and the bottom adjusts up and down

-B

[mycargoesvroom]

there are 4 adjustments for each headlight.

2 for the lows and 2 for the highs.

on the low beam section the Top adjuster , adjusts the height of the output, the Bottom adjuster moves the output (the step) left and right

on the high beam the Top adjuster adjusts left and right, and the bottom adjusts up and down

-B

You are the fucking man! Thanks!

[HeresMyMind]

no problem, When it comes to headlights I can pretty much tell you anything you need to know. ask me how to install a Cam and you are looking at a person with the IQ of 1

-B

[mycargoesvroom]

What do you think would be a good projector to swap into my highs? I've been looking at the JDM ES300 fogs but I'm unsure of the dimensions of the projector.

[1-3-2-4]

Thanks I remember playing with the screws in the house with a drill one time but I got lost when they were in the car lol