Does a 94-97 Integra type R lip Fit on a BH?

[SativaMan04]

I know this has been talked about a lot of times, but Is it only the 98-01 type r lip and 98-01 Mugen style lip that fits on a BH/BE?

Will a Type R 94-97 lip fit?

Thank you! :smt028

[chuckthefuk]

Yes..

94-01 is the 3rd gen integra..

The design of the lip will change depending on what model it was ment for.

Example: 01 Type-R or 94 LS.

Either way it will fit as long as the top portion that mounts to the bottom of the bumper is completely flat.

Keep in mind that these lips need to flexed outwards .. (heat pressure screws)

-Chuck

[SativaMan04]

Thanks ChuckTheFuk!! Haha that username is Classic!

When you say Flexed outwards, you mean I have to flex it a little and Screw it to the bumper right?

Also what are heat pressure screws?

Last, but not least. Would I need to Drill a hole into my bumper and lip then screw in the screws?

I'm guessing I should get screws with nuts so I can secure the screw with the nut when lip and bumper are joined?

Thank you!! Also I will be introducing myself and making a profile/ putting up pics of my BH this weekend.

Thank You Chuck!

[chuckthefuk]

hehehe at least someone enjoys my nickname :-D

Anyways I ment to say (Heat gun, apply pressure, attach with self tapping screws)

Mount the lip from the center of the bumper and then you need to pull the lip either in our out towards the bumper and attach with screws on the edges.

There are many different ways to attach the lip.

Subaru OEM method is using metal clips that are threaded for a bolt to be screwed in.

Other methods are the nut and bolt style or just use self-tapping screws. No drilling no fuss just screwing..

Cheers and welcome to SLi!

-Chuck

[SativaMan04]

So, will it not fit if I dont use a Heat gun?

I don't have any experience with a Heat Gun, but I'll try. What's the worst that can happen If I mess up? (melting the Lip, making it look like a burnt marshmello?)

I'll be picking up the lip tonight so I'll have to see it, test fitment, so i can get an idea of what we're talking about here.

I'll look into the DIY Section to see how people have installed their lips.

Thank you!

[chuckthefuk]

You can use a blow dryer..

Heat gun just gets much hotter and a higher chance of marshmellowing..

Either way I am sure you will be fine just take it ez and don't rush the job.

-Chuck

[SativaMan04]

Thanks Chuck! So I found a place that gets container legacy parts. I bought the lip, but will save up to go jdm front. I really love the look of legacy's, If only we came Stock Turbo!! Especially the Ass of the be/bh's :smt007 :smt020 :smt025

[MRLancaster]

Container parts?

[chuckthefuk]

I think he means JDM importer who deals with shipping containers or in other words large amount of items.

-Chuck

[TGX4776]

Thanks Chuck! So I found a place that gets container legacy parts. I bought the lip, but will save up to go jdm front. I really love the look of legacy's, If only we came Stock Turbo!! Especially the Ass of the be/bh's :smt007 :smt020 :smt025


and where are you located?

[SativaMan04]

I think he means JDM importer who deals with shipping containers or in other words large amount of items.

-Chuck

Correctomondo!!

[SativaMan04]

Thanks Chuck! So I found a place that gets container legacy parts. I bought the lip, but will save up to go jdm front. I really love the look of legacy's, If only we came Stock Turbo!! Especially the Ass of the be/bh's :smt007 :smt020 :smt025


and where are you located?

Northern California. 1 hr south of San Francisco.