BE/BH cluster in BD

[broknindarkagain]

Can anyone point me in the right direction as to where I would find the wiring information to swap a JDM BE/BH cluster into my USDM BD Legacy?

Thank you

[chuckthefuk]

Matty2Hotty wired up the 4EAT cluster with a boat load of wires and extensions. You can find his posts around SLi.

The literature & manual section has the USDM wiring schematics located in the respected year Factory Service Manual (FSM)

Most members buy the cluster and just swap the black tinted cover onto the USDM cluster and don't bother with the wiring.

-Chuck

[broknindarkagain]

Chuck,

Thanks for the info. I'm not interested in swapping the cover over because its the illumination that I'm wanting in the BE cluster. I found wiring information for the BE cluster, so I'll take a look in the FSM for the BD wiring info.

If I get this figured out, I'll post up a DIY on it.

[chuckthefuk]

Good stuff and welcome to sli.

[broknindarkagain]

Good stuff and welcome to sli.

Thanks.

I've been around for awhile, I just don't post here very often. I have accounts on pretty much all the Subaru sites and I check in on them frequently....but there are only a select few that I frequently post on....mainly local ones

[Lsnaple]

You're on wrxatlanta right? That name looks familiar. I'm interested to see how this turns out.

[Huffer]

There's a fella in Russia who swapped a BE/BH cluster (auto trans) into his BG (also auto). Thread should be in Member Intros or Member Rides 1.