Easy Mods to a 2004 Legacy

[04Legacy]

Hi guys, I am new to this website so any help would be very appreciated. I have a 2004 Legacy 35 Anniversary edition that I want to do some small mods to. Like a Cold Air Intake/Short Ram Intake, Exhaust, Lowering Springs, Front and Rear Strut Bars, Wheels and Tires (have a set of chrome ones from my previous car), and some other small mods you guys can think of. Also would any other subaru car parts fit on this car. Ex: WRX/STI Lowering Springs and struts and Shocks, Cold air intake, strut bars, etc.

Thanks,
Nic

[mycargoesvroom]

Welcome Nic,

I would suggest searching this forum for the answers to all your questions. Everything you asked has been asked time and time and again, and there are Stickies in each specific sub forum to help you on your way.

Good luck, and happy modding!

[04Legacy]

I have looked through this forum and found some answers but not all of them. Would any intake from a non-turbo model fit on my car if it has the same engine, could i use lowering springs from a different model like a impreza and mod the car to make them fit, and use a wrx exhaust from the catback. Any answers would be appreciated.

[02_Legacy]

You didn't look hard enough I guarantee all those questions have been answered on here but for the truly lazy:
For the intakes you should be fine with SRI's but CAI's are not going to work from different models because they go into the fender in different places.
For springs some years Impreza front springs will work, however no impreza rear springs will work with any amount of modding.
An Impreza catback will work but the midpipe needs to be lengthened and the flange needs to be rotated.