Will it rub?

[beeda]

If I use h&r springs, gr2 struts, and run 225/45/r17 on a bh??

[mycargoesvroom]

I have the same setup on my BD and 225 was a bit too much. Filled out the wheel wells very, very nicely but rubbed on bumps and at full lock.

Not sure about BH chassis though.

[httrdd]

Roll and fare will be what you have to do, but after it is done it looks and feels great!

[Bookem]

It really depends on the offset of your wheels. I'm not sure on a bh, I think they have just a bit more room than 2nd gens. In my BD I have H&R springs with GR2 struts with 235/40/17 Azenis but my offset is 42 with no rubbing (extremely close to strut and fender though) and I use to rub with outback rims and 205/55/16.

[bobbyjimmy]

I think you'll be right with 17's, a couple of wheels ago I had 225/45/18's and they just rubbed with a couple of people in the back (lowered on Bilstein's with Whiteline springs).

[Lsnaple]

What's the offset? That would really be the difference maker. I think I have 225 width on my bd, but I also think I'm at about a 38offset on 17x7.5 and sti struts and I clear fine. The struts might help you some, mine gave extra clearance, however I don't have firsthand experiance with those struts or a bh.