BE/BH door panel removal?

[Wiscon_Mark]

I searched, but didn't really turn up anything.

Is there an extra step or trick to removing the door panel on a BE/BH (compared the BD/BG)? I tried on a friend's car (troubleshooting a rattle) and couldn't get it off. It seemed like the bezel around the door handle/lock on the inside was holding it in, but I couldn't figure out the trick and wasn't eager to break anything on a friend's vehicle.

TIA

[MRLancaster]

You have to undo the bottom clips then push up on the pannel. there are hooks at the top that go around some metal

[Wiscon_Mark]

So there are hooks on the door handle bezel that go like this?

_
| |
|

I know about the hooks that go over the lip of the door, right at the bottom of the window, those are on the BD/BG.

If anyone has an FSM diagram, it would be really helpful.

[02_Legacy]

Here you are. There is a screw in the door handle area behind a flap.

https://sl-i.net/FORUM/images/imported/2011/08/Legacy1-1.jpg

[Legacy89]

Well, i never removed the tweeter, or the screw inside the door lock/handle.
Just the other three.

Just wired up for my soon to be installed frontset so i had the doorpanels of this sunday.

[Wiscon_Mark]

I got the screw by the door handle, but not the one behind the window switches. That one's new. Thanks a lot!