Matty2Hotty 99'USDM RHD Legacy UPDATED 5/15/12 Sold

[Matty2Hotty]

1999 USDM RHD Legacy Wagon, picked her up out in the middle of no where, roughly a two hour drive. The vehicle was owned and purchased new from Carter Subaru (one owner) in a small town in Grapeview, WA about 2 hour drive from me. She is a diamond in the rough... Let the project begin! :smt023

[STIdarkside]

How many miles are on it? Looking forward to seeing some pics... Can't imagine what you have in store for this one...

[02_Legacy]

Do you still have the outback? And any future plans? *cough cough* twin turbo *cough cough*

I always look foward to watching your builds you do a great job, keep up the good work.

[csweston]

After seeing where you last car ended up i cant wait to see what you do to this.

[Matty2Hotty]

Thanks guys, I did sell the outback so I have some spending funds but more so looking into a F430 Spider for next year so not sure how crazy I will "DIY" on this Subi. Like 250k miles. Shes a dark forest green but will change it up. I kept my 18" wheels off the outback so those will fit nicely, need some lowering springs, gt hood(might build a 11' STI hood), jdm tails, jdm spoilers (mid and upper), jdm grill and headlight combo, jdm power folding mirrors, jdm front and rear bumper, fenders (open to research still), interior swap (options open to research), jdm steering wheel, and of course more in the works that I shouldn't go into detail toooo much. lol

[YVK]

sounds like she's going to be a beaut! and a definite head turned cause of the RHD ! can't wait to see pics!

[httrdd]

Is this the TT? That would be a nice mail carrier!

[Huffer]

I'd like to see some STi fenders grafted on there...

[mycargoesvroom]

I'd like to see some STi fenders grafted on there...


+1

[Matty2Hotty]

I'd like to see some STi fenders grafted on there...

Has it even been done? Im like starting from scractch since I been in the 3rd gens for over 6 years and this is my first 2nd gen so I have no idea on what works with what yet. I have a ton of research and need some help to do it feels like.

[peugoby]

I'd like to see some STi fenders grafted on there...

Has it even been done? Im like starting from scractch since I been in the 3rd gens for over 6 years and this is my first 2nd gen so I have no idea on what works with what yet. I have a ton of research and need some help to do it feels like.

Someone did GD bugeye sedan front fenders a while back. IMHO it didn't look very good. They're too boxy and squared off for how curvy the rest of the car is. Its all opinion though. Sounds like an awesome project, I can't wait to see some pix!

Is it AT or manual?

[ElbryanWolf]

... still waiting on pictures of your new ride :) Your threads are always a good read!

-Wolf-

[Huffer]

I'd like to see some STi fenders grafted on there...

Has it even been done? Im like starting from scractch since I been in the 3rd gens for over 6 years and this is my first 2nd gen so I have no idea on what works with what yet. I have a ton of research and need some help to do it feels like.

GTWagon from Canada put GD flares on the front of his wagon. I personally thought they looked great and added some aggressiveness to the front end. The 2nd gen bumpers are quite "soft" and very rounded out. I think he balanced it out with color-matched skirts and a Hipposleek rear wing. His car was also lowered and tinted.

[Garrison]

rewind a few posts. Did I just read you're getting a freaking F430?

Baller dude.

[Matty2Hotty]

Yes, Yes and Yes... :smt023

Now looking at my Vin I have a BK7, anyone want to school me on this?

Huffer I think that's why I never been the biggest fan of the 2nd gens cause they are more rounded and not aggressive as I like them to be. I was even thinking or seeing if anyone has done a BE/BH front end swap. Can't be that difficult cause it's all in the front core supports.

[Yamazaki]

Yes, Yes and Yes... :smt023

Now looking at my Vin I have a BK7, anyone want to school me on this?

Huffer I think that's why I never been the biggest fan of the 2nd gens cause they are more rounded and not aggressive as I like them to be. I was even thinking or seeing if anyone has done a BE/BH front end swap. Can't be that difficult cause it's all in the front core supports.
The '7' in BK7 means 2.2L engine. '9' means 2.5L, '5' means 2.0L. There are others, but you could just read this: http://www.sl-i.net/FORUM/viewtopic.php ... 40#p197340 (http://www.sl-i.net/FORUM/viewtopic.php?p=197340#p197340)
The third character in the model code depends on engine size (primarily), drivetrain, and suspension.

And I've seen a 2nd gen with a BE Blitzen front bumper and wheels. It can found here: http://www.sl-i.net/FORUM/viewtopic.php ... 54#p237454 (http://www.sl-i.net/FORUM/viewtopic.php?p=237454#p237454)

[Matty2Hotty]

Well got a little time today while my daughter was sleeping. Installed drop in KN filter I had laying around, pull spark plugs and found some nasty autolite platinums that were in there I would say atleast 100k. Cleaned up a few things and still need to do tranny fluid change, front and rear diff fluids and oil.

Question: my wipers are seriously sloppy and seems to slid randomly over and off my windshield on my driver side. Any adjustments or do I need a whole new assembly?

Quick shot before bed, sorry not the best but it's a start!
https://sl-i.net/FORUM/images/imported/2011/09/df1b2d78-1.jpg

[Huffer]

Tighten the nuts on the wiper arm when they are resting in the off position at the bottom of the windsheild.

[B's Legacy Wagon]

hey there matty when you say they are sloppy and slide around. are you thinking there is a tooth stipped on the wipper motor or maybe the thread on the wipper arm? just trying to picture what it is to come with some ideas.

[Matty2Hotty]

I read a huge thread on this on nasioc, it sounds like a wiper problem where the nylon socket is bad, I need some "help kit" for like $3.00. I will pull my assembly off later tonight and inspect it, it bangs against the a-pillar and has like 4" of play.

[LIMITED]

I have tried this
Unscrew the nut holding the wiper arm. Pull the arm off , rotate as needed and slide back on. There are adjustment notches/teeth that will match up.

[chuckthefuk]

Man you go through cars fast.....

[Matty2Hotty]

I have tried this
Unscrew the nut holding the wiper arm. Pull the arm off , rotate as needed and slide back on. There are adjustment notches/teeth that will match up.

Thought of that but it was 4" off sloppy play if I move the pass it moves the driver side. It's the white sockets, pulled them off today and were all chewed up. Post pictures on them after work.

Is that bad I go through cars? lol I get bored easily. Sorry.

[Dead91silvia]

There was a silver one on craiglist last week... this isnt it is it? I wanted that car! perfect for a swap!

[B's Legacy Wagon]

is it the threads on the wiper motor that is stipped. causing the nutt not to get a tight fit on holding the wiper arm. 4" is a lot of play.
ill wait till you get pictures posted of it, once i can see it ill have some ideas, not to mention plenty of time to research.( man retirement is grand for that)

[mycargoesvroom]

Is that bad I go through cars? lol I get bored easily. Sorry.

I have the same issue. I've have 6 cars in the last 2 years.

[chuckthefuk]

[quote="LIMITED"..Is that bad I go through cars? lol I get bored easily. Sorry.

Wheres the love :smt007 .. wheres the deep sentimental connection :cry: ..

[subiman2005]

Joined the sold car club on monday lol I see you already moved on haha

[geckoboy86]

Longest members thread with no pic.

I want to see pics.

[YVK]

lol there's 1 pic up there ^ but ya i want moar too :D

[Matty2Hotty]

Hey Hey, calm down LOL I'm working on it, first picture hasn't changed or wont till Friday when all new brakes come in from Centric, its all torn down right now. Car just been sitting on stands :(

[Outbackid]

all new brakes come in from Centric
Rockauto? :lol:

[Matty2Hotty]

No i have connections with Centric directly.... But.... Found duct tape used as my steering rack bushings(yes a huge fire hazard and most all the duct tape already gone), my rear endlinks missing all the rubber in one and endlink and the other broke, my inner tie rod end had a good 1/2" play side to side.... So what else is on the list... Have everything ordered and should be here Tuesday and Wednesday. I promise I will get pictures up this upcoming week! It's been hectic and stressful enough am working like a mad man to get my Subi on the road!

[B's Legacy Wagon]

Hey matty wasnt sure if you saw the parting out thread for nic_701 . wasnt sure if you could use parts from a 1998 GT or not. viewtopic.php?f=22&t=22361 (https://sl-i.net/FORUM/viewtopic.php?f=22&t=22361) i was thinking if he had fender and or door/ door cards he may have the stering rack bushings as well if this can help you

[Matty2Hotty]

Just a little update, she is just my winter beater so no show quality from this little lady!
https://sl-i.net/FORUM/images/imported/2011/10/4fbd0cfd-2.jpg

[chrish8r]

i love those wheels!!!! what are they????

[csweston]

If you make a rear diffuser for this car, please make a DIY this time :grin:

[Dead91silvia]

Winter beater?! Dude, we live in western WA! We have nothing but rain and the occasional 3 days of snow! haha :lol:

Looks good! :smt023


Just a little update, she is just my winter beater so no show quality from this little lady!
https://sl-i.net/FORUM/images/imported/2011/10/4fbd0cfd-1.jpg

[Reason]

[quote="LIMITED"..Is that bad I go through cars? lol I get bored easily. Sorry.

Wheres the love :smt007 .. wheres the deep sentimental connection :cry: ..

That's my problem, for what im doing to my car I should use a more solid platform. But I would hate to see her go. This will be cool when you start getting into it.

[Dead91silvia]

Hey did you see if that fuel pump and the cats fixed the problem at all?

[Matty2Hotty]

Not yet, it's my daughter's 2nd birthday today so I been too busy and won't get to it till Monday on my day off.

[Matty2Hotty]

Got the throttle body yanked and waiting on my replacement, got bored and murdered out my headlights. Came out sexy!
https://sl-i.net/FORUM/images/imported/2011/12/33135736-1.jpg

[drft204]

nice you got the same grill as me. people were wondering where the hell did it come from =/

[Matty2Hotty]

The grill is just a jdm early model "short" grill, hence the bumper gap.

[Dead91silvia]

Matt, get some REAL pic of this thing!

poke poke

did you ever see if those cats worked?

[Matty2Hotty]

I will on the 7th when the TB comes, just waiting on parts still, got a replacement TB with sensors. Just got the cats with new denso sensors installed.

[Dead91silvia]

I'm hoping to get my BD back on the road some time soon... Need to get a small meet together... Maybe sometime around New Years. Brad will have his projectors soon and his Zero Sports grill... Bunch of JDM Legies running around would be kinda cool! haha

[Matty2Hotty]

I'm seriously hoping this fixes my problem with the hesitation. Someone mentioned a exhaust valve in one of the heads which smells like rebuild that am dreading. Don't really have $1800 to throw around Christmas time :(

[ScoobySnack]

What lip did you add with your factory front lip? Looks nice.

[Matty2Hotty]

What lip did you add with your factory front lip? Looks nice.

Just a spare limited STI lip I had laying around. Turned out okay but it's beat up a little.

[Matty2Hotty]

Sold my 18" wheels so she is sitting on blocks in the garage. Need to buy 16" for some bugeye rims I have laying around or wait on a deal on Craigslist for wheels for cheap. Can't figure out how to get a signal of .45-.5v off my tps sensor and tried a couple different things. Trying to not give up on the project just yet.

[Matty2Hotty]

Got my Rondell wheels on for $300 and drove her over to my parents. They look okay. Might change the white.
https://sl-i.net/FORUM/
https://sl-i.net/FORUM/images/imported/2011/12/c79e67ec-1.jpg

[ElbryanWolf]

When did you get the flat black paint done? :) This looks mean with the paint and white wheels!

Keep it up :)

-Wolf-

[98legwag]

I like it. Looks good.

[2000gtb]

I love the way that looks..

[Dead91silvia]

The wheels look cool, but the white looks funny...

[r3v_v3ng3]

crazy contrast but looks good. are you gonna murder it out?

[Matty2Hotty]

I did murder her out, I just havent updated new pictures just yet, still needs to get window tint

[Zac]

Whens the ej20r swap? :grin:

[Matty2Hotty]

The EJ22 is coming out and doing a EJ25 swap in her... Debating on delta cams since delta is local about 5miles away. Not going anything crazy such as EJ20R or STI swap on her. Pictures coming soon...

[Reason]

Cams are worth it

[Zac]

Definetly do cams and a mild pnp/ port matching and EL header if you can budget it.

[rhdlegacydrvnguy]

Got my Rondell wheels on for $300 and drove her over to my parents. They look okay. Might change the white.
https://sl-i.net/FORUM/
https://sl-i.net/FORUM/images/imported/2011/12/c79e67ec-1.jpg


Beautiful !!

[Dead91silvia]

The EJ22 is coming out and doing a EJ25 swap in her... Debating on delta cams since delta is local about 5miles away. Not going anything crazy such as EJ20R or STI swap on her. Pictures coming soon...

So you did get a EJ25? Gotta see this! I should have the motor ready in my BD soon. I'm thinking time for a meet some time soon! :grin:

[Matty2Hotty]

It's slowing coming... It's been too cold but debating on putting my HKS exhaust from Japan on off a BG5, muffler is massive!
https://sl-i.net/FORUM/images/imported/2012/01/8e5bb466-1.jpg
http://i264.photobucket.com/albums/ii199/WashHottestPlumber/e3b85560.jpg

[LGT Kirby]

Updates on this? I was going to pick this up when I saw it, but found something else instead.

[Matty2Hotty]

Sold my white wheels and just rocking my WRX rims, new grill coming, exhaust is on, waiting on dropping a 2.5l in her so will update once I get the motor dropped in her.

[Dead91silvia]

I got my BD ready... waiting for you! haha

[Matty2Hotty]

Hey Hey, am working on her! Waiting on a 99 only forester 2.5L sohc to pop up for sale, it has all the same setup wiring, maf base, and everything after my research to do a 2.2 to 2.5 swap for my phase2, already got the ecu and tranny... Found a motor on the east coast for $1000 with 121k so waiting to hear back.

[Dead91silvia]

I thought you had a motor already!? You sure you dont want me to find one? If I'm looking for a 2.5 from a Forester, that might be way more easy to locate then a 2.2 Legacy you had me look for before.

[Matty2Hotty]

Yeah "did" but found out it needed ton of work and headwork so I sold it, only 99 forester is P&P.

[Matty2Hotty]

Got some goodies and more projects to keep me busy...
https://sl-i.net/FORUM/images/imported/2012/03/121125c4-1.jpg

[chuckthefuk]

wow how much where the morrets?

[Dead91silvia]

Those are cool! I want!

[Matty2Hotty]

Been busy with my MR2 swapping and processing my 6 speed tranny. Got my grill today, liberal wing, made some one off eyelids and finished playing with my headlights. Just need to make high/low wiring harness tomorrow. Not bad for $200 and a little cleaning.
https://sl-i.net/FORUM/images/imported/2012/03/c812eb55-1.jpg

[Dead91silvia]

^ I hate you... HAHA!

Whats the wing look like?

[Matty2Hotty]

You can see it hiding in the background ;) haven't painted and mounted it yet, have to swap my hatch lid before I mount it.

[Huffer]

Hot dang.

[Dead91silvia]

Why do you need to change the hatch?

[Matty2Hotty]

on both side of the lisence plate all bubbly(rusting out under the paint pretty gross looking), just a ton of rust. I got a complete outback for $40 from a guy parting his wagon out like last year so it's been sitting in my shed waiting since its kind of a two person job. Don't really want to mount my spoiler to the rusty hatch.

[chuckthefuk]

$40! wow what a steal

[Matty2Hotty]

Yeah complete even with center light, got some mint outback seats which only cloth but for $60 front and rear... Upgrade from my ripped, 200+lbs driver, smoked in seats. Wish I just got more parts off his back then, got smashed pretty good as the front end was trashed but only 45k orginal miles on it.
Of course I was only intended to get his outback rear bumper to upgrade from mine since Outbacks have a diffuser style with exhaust cutout that fits my jdm exhaust perfectly. One thing turns into a garage full of parts dang it.

[Dead91silvia]

Hey, bring it over here and swap out the parts. I haul in scrap every now and then so you can leave the junk here and I can help ya swap it. Thats if you can get your hatch here... LOL

I'm also about to hit up a couple yards today, one I know had a nice set of 99 Limited leather in an Outback...

[Huffer]

I live in the wrong damn state.

[Matty2Hotty]

Dangggg leather hmmmm lol well if you find a good 95/96 front bumper let me know!

[Dead91silvia]

Found 2 sets of leather today... One set missing 2 headrest's and one door card, I think. the other still complete with door pieces. Both sets in good shape.

I did see a 96 GT, but didnt look close at the bumper. Had a beat to hell lip on it. Brad just swapped out his bumper (97-99 GT)if you want that I'm sure he would hook you up!

[Matty2Hotty]

I did see a 96 GT, but didnt look close at the bumper. Had a beat to hell lip on it. Brad just swapped out his bumper (97-99 GT)if you want that I'm sure he would hook you up!

I would but I'm looking for the 95/96 short grill bumper or will be buying a jdm bumper for my headlight/grill setup am running. We will see but am pretty stuck on my grill setup.

[Dead91silvia]

If you want leather, I talked to my guy today. One set for $200 another for $150... No bumpers though...

[Matty2Hotty]

Got some time to dry fit some things... Still need to do wiring and rear hatch.

https://sl-i.net/FORUM/images/imported/2012/03/012a3ad4-1.jpg

[r3v_v3ng3]

:smt023 Noice!!!

[chuckthefuk]

Did you cut the eyelines? Looks bad ass!

[Matty2Hotty]

Built the eyelids myself, took a couple days to finish. I think they turned out pretty good, I don't have the best camera phone but the car looks so much better in person. Have to figure out how to wire in the morette now... Kinda stuck.

[chuckthefuk]

Woah.. for a second I thought it was the one piece eyeline/grill combo..

Freakin' sweeet! Looks mean.

[Matty2Hotty]

Straight on view
https://sl-i.net/FORUM/images/imported/2012/03/09071f15-1.jpg

[hansvonaxion]

That grille isn't supposed to work with that bumper but looks good to me.

[Dead91silvia]

So you did get a JDM bumper? Thats not USDM... at east dosent look like one..

Love the lights! You better have that thing ready for a cruise soon!

[Matty2Hotty]

That grille isn't supposed to work with that bumper but looks good to me.
Not sure why it isn't supposed to... It sits flush and perfect dry fitted. No gaps or anything (just my pictures make it look like I have gaps but once bolted and ready there isn't.)


So you did get a JDM bumper? Thats not USDM... at east dosent look like one..

Love the lights! You better have that thing ready for a cruise soon!

Yeah the jdm for $300 shipped and i added a lip. How did you get the SLI front plate? still waiting on what to do with the motor... Either way next paycheck next week am ordering a rebuilt forester 2.5 or just a wrecking yard 99 forester 2.5, so two weeks tops.

[Dead91silvia]

sweet! Where did you get it for $300?

Here is the SLi thing I made..
viewtopic.php?f=39&t=24187 (http://www.sl-i.net/FORUM/viewtopic.php?f=39&t=24187)

Let me know if you want me to locate a motor for ya... Got a couple more connections...

[hansvonaxion]

Not sure why it isn't supposed to... It sits flush and perfect dry fitted. No gaps or anything (just my pictures make it look like I have gaps but once bolted and ready there isn't.)

We had this discussion :lol: . That grille is supposed to be for the early (type A) model JDM bumper (smaller non-projector fogs) but you fitted a late (type B/C) model JDM bumper (bigger projector fogs).

Anyway, good to know it fits well even with the late model bumper. I might go check a couple of grilles for the early model and see how they fit on my late model GT-B. :smt023

[redlegacygt]

that looks absolutely awesome man! what lip is that?

[Matty2Hotty]

Yeah wasn't sure if I would have gaps but I don't so maybe it is a B/C model grill. Who knows.

I got it from the same vender on eBay that ships super cheap, I talk to them directly instead of on eBay so know before hand what bumpers they have, hence why I lost that limited bumper cause I didn't realize they posted the day before I talked to them.

It's just a STI Limited lip I added...

[amgarrety]

The speed at which you make a car look completely badass astounds me.

I bow to you.

I can't wait to see this thing out in the daylight! (with all of the new stuff of course)

[Matty2Hotty]

If your viewing my thread from my title..... Hahahahaha April Fools. She is a little muddy but got my SLI front plate on for my update! She needs a good cleaning, don't judge just yet!

https://sl-i.net/FORUM/images/imported/2012/04/a9297d05-2.jpg

[Dead91silvia]

Blew up.... haha... Like it would matter anyway since your replacing it...

Hey, I'm working on a meet for April 29 so hurry up an get it done already!

[Matty2Hotty]

Blew up.... haha... Like it would matter anyway since your replacing it...

Hey, I'm working on a meet for April 29 so hurry up an get it done already!

Hopefully, got the motor ordered today! Tranny is in the shed waiting to bolted up once the motor comes(debating on pulling the torque converter off and changing gaskets on it. Most likely pull the timing off before I drop the motor in. Spoiler is getting mounted tonight or tomorrow and been lazy on making my headlight harness yet so I need some motivation.

[Dead91silvia]

Get it done! Make sure she's running good, cosmetics can be one just about any time.. haha

[Matty2Hotty]

Gotta update for everyone... Slowly coming!
https://sl-i.net/FORUM/images/imported/2012/04/61c19887-2.jpg

[Dead91silvia]

Toss a T-belt, water pump, bearings and maybe some HG's and swap that baby in!

Whats with all the rust?! :smt017

[Matty2Hotty]

Been sitting outside, it's from the east coast. But yeah looks ugly with the rust, won't look as bad once am done with it.
https://sl-i.net/FORUM/images/imported/2012/04/14df328b-2.jpg
Managed to get most the things done today...
https://sl-i.net/FORUM/images/imported/2012/04/7dd6c90b-2.jpg

[Matty2Hotty]

Pulled my tranny today, driveshaft ujoint is toasted. So now am sol untill i find a wagon parting one.

[Dead91silvia]

That shouldnt be too hard to find.... I scrapped 2 of them... Did you get the motor installed yet?

[Matty2Hotty]

Dads taking the driveshaft to some shops tomorrow to see if any shop can do a serviceable u joint like Rockford makes, if not then yeah it will be wrecking yards or eBay. No motor yet, waiting on my headers tomorrow, timing kit Wednesday to show up, and then dropping the motor. So next weekend...

[Dead91silvia]

Cool... YEah, Brad and I are wanting to have a meet thats not just him and I with Leggys... haha

[Matty2Hotty]

Need to help out and get Zak's wagon going too. No idea whats up with his swap going on... That would be one more member and 2nd gen.

[mike-tracy]

Any 2nd gen auto drive shaft should work, not just wagon ones...

[Matty2Hotty]

Yeah! Found one with 89k miles but 45min drive, just having a Rockford serviceable installed for $60 3min away at a driveline shop. Can't wait to get her on the road, itching to Drive her!

[gonepostal]

thats a dope wagon for sure, like mint condition compared to my rust bucket! keep it up, jdm bumper looks mean!

[Matty2Hotty]

Just snowball effect... Now the shop took off my throttle body and forgot it... WTF. Now I got my motor but no throttle body. One thing after another it always seems like with every single Subaru I owned in some way or form. They found it and shipped it out priorty.

[Matty2Hotty]

Found out i need to find a throttle cable bracket that mounts to the intake manifold that mines missing buttttt Almost 1140pm.... Let the horses sing.......
https://sl-i.net/FORUM/images/imported/2012/04/aa6d91d9-1.jpg

[Zac]

Great progress! did you swap in a manual transmission too?

[Dead91silvia]

Nice! Get it done! Let me know if you need a bracket, I might have one...

[Matty2Hotty]

Thanks! Got the bracket 5min ago in my mailbox... Dad dropped one off before he took off to the ocean. Now I need to solder up a wiring harness for my headlights, finish the fog light wiring, new drycell battery, and rebuild/remfg the whining power steering pump.

Update: need a different Throttle bracket, guess there is a good 3 or so different ones. Just great.

[Matty2Hotty]

Well to add more fuel to the burning fire... Either the Subi has been abused too much in the past or she is just loving the warm garage staying dry.
Got a reman power steering pump from orileys at lunch time... 1150pm installed the pump... Come to find out my banjo bolt for my inlet hose that goes into the pump is too small and the pump itself has a larger threaded inlet. WTF. So now am lost... Maybe track down a 96-98 power steering bolt or kick the Subaru out of the garage and let it sit outside. Seriously?!?!

[nikolaus.conrad]

That sucks dude I hope you get it figured out! Sweet car you have!

[geckoboy86]

Well to add more fuel to the burning fire... Either the Subi has been abused too much in the past or she is just loving the warm garage staying dry.
Got a reman power steering pump from orileys at lunch time... 1150pm installed the pump... Come to find out my banjo bolt for my inlet hose that goes into the pump is too small and the pump itself has a larger threaded inlet. WTF. So now am lost... Maybe track down a 96-98 power steering bolt or kick the Subaru out of the garage and let it sit outside. Seriously?!?!

You should be able to use it...You need to swap out the adapter from the original where the banjo bolt goes...
I had to do this when I installed a 04 Impreza PS pump in my 95.

[Matty2Hotty]

Yup, went back to get my core and they luckily had a air gun handy to pop them off. Car runs great! Took her out and did a couple freeway drives and cruised around! Rumbles just like my WRX minus the turbo.

Last on the list.... Rear Tint and Wheels. It will be a while!

[chrish8r]

glad to see it is on the road....my legacy is on the road but cant go all too far with a blown hg

[Matty2Hotty]

Welcome to Rainy WA
https://sl-i.net/FORUM/images/imported/2012/04/fef9c872-1.jpg

[STIdarkside]

What exhaust you running? Looks good.

Did you have any issues on your BE Legacies (Auto's) with the Borla headers and catback throwing a code?

Thanks

[98legwag]

That thing is awesome! What wing is that?

[Dead91silvia]

Bout time! Your still working Sunday?

[redlegacygt]

I absolutely love the front end of your car. Awesome job!

[Matty2Hotty]

I absolutely love the front end of your car. Awesome job!
Thanks took me a while to pick out a mean but sexy front setup :smt023


Bout time! Your still working Sunday?
Unfortuantly yes :smt022

[Dead91silvia]

:cry:

It's ok... We can find another weekend... It's only 2 of us anyway, I'm thinking we will just hang out here and work on the cars or something...

[2000gtb]

car looks scary... i like cars that looks mean and looks like it can eat you.. love it

[Matty2Hotty]

Well minus someone tapping my front end in the parking lot knocking my entire morettes out, I got some windows tinted 5% limo murdered out. Only the rears for now, wheels next.

[98legwag]

Someone broke the Morrettes??!! Are they still usable at all?

[Dead91silvia]

Well minus someone tapping my front end in the parking lot knocking my entire morettes out

:shock: NOOOOOOOOO!!!!!!!!!!!!

How bad?

[Matty2Hotty]

Isn't horrible, enough to crack and pop my driver side out of alignment. If your looking dead on it looks okay but you can tell.

[Dead91silvia]

that sucks

[Outbackid]

That does suck. I've always loved morettes.

[rhdlegacydrvnguy]

SEEEEEEXXXXYYY!!! I'm in the Process of flat blacking my RHD. looks BA !!!

[hansvonaxion]

I've seen 2 separate sets come up for sale recently, they were both sold before the ad was even published, damn it!

[Matty2Hotty]

haha sorry guys I guess i made it sound a lot worse than what it really was and havent updated too much on here, butttttttt she will probably be going to a new owner tomorrow. He is a forum guy so will continue the build thread of his own. I have too many cars right now the gf wants gone so I have to make momma happy. Keep you guys posted!

[Yamazaki]

What!? Selling again? C'mon, why do you tease us with thesr projects only to send them on their way? :smt002

So what's your next project going to be?

[Reason]

Matty you are no longer allowed to post build threads until your project is complete, the collective can't handle cool projects stopping mid way. Lol

[nikolaus.conrad]

Matty you are no longer allowed to post build threads until your project is complete, the collective can't handle cool projects stopping mid way. Lol
The Lord hath spoken :lol:

[xoSubieLegacyxo]

AMEN!

[Dead91silvia]

Matt... I'm gonna hurt you! You should have sold me those lights before... lol

I'm guessing that your getting a decent price?

[Matty2Hotty]

Yeah. The guy seems super cool and everything, if he wasn't I wouldn't waste my time selling it.
I'm sorry Reason and everyone else who follows!!! I enjoy making cars unique to a point of seeing what else someone can throw at it to make it that much more amazing. To be honest... Wouldnt it be boring to see a finished project of mine? That's kind of a trick question cause I honestly don't think there is a end to modifying my vehicles.
Robin... I think Hans got his hands on another set, but it will be a while before I jump into any other car unfortantly. I will be still be around and on the site, it's like a habit!

[Dead91silvia]

I cant afford them anyway... haha...

Well, Brad and I will still let you hang out with us, even if your driving the Toyota... haha

[Matty2Hotty]

She is officially sold

[Reason]

Who bought it??

[mike-tracy]

It's been said before, but you sure go through cars.

[ags18]

I bought it!

Very excited to start this project. :cool:

[Reason]

I bought it!

Very excited to start this project. :cool:

Congrats! Welcome to the family!

[ags18]

Congrats! Welcome to the family!

Thank you. This is my 5th Subie (96 IMP OB, 00 Forester, 06 IMP Wagon, 99 RHD). Now, i've got a nice RHD to start with unlike the one I bought 3 years ago. :( "Fail" to say the least.

[liggity]

You go through cars like nobody I've ever seen Matt. And the Outbacks working good for me still buddy. Drives me insane here and there, but it got me hooked on Subis.