Remote car lock

[krot84]

Hey guys
I'll be getting my new remote central locking system any time soon.
I think I'll do a write up, but before that i need to know how to connect it to the turn signal ? I mean i want my turn signals to blink when i lock and unlock the car.
I've tried looking at the drawings but couldn't find the main connector for the turn signal.

What's your suggestion ?

[Okin DaVanh]

It's because you might be looking for the wrong wire. I think you should be looking for the parking lights.

[krot84]

It's because you might be looking for the wrong wire. I think you should be looking for the parking lights.
By the description of the remote locking system it should connected to the parking lights.
But would it be so difficult to connect it to the turn signals ?
I thought maybe there's a way to connect it to the hazard switch, as you know it turns all the turn signals and it's exactly as i want, however i don't have the schematics for this switch.

[Okin DaVanh]

I would think so, as there is 1 wire (all parking lights come on at once anyways) for the parking lights, and there would be 2 0r 3 (hazard light circuit possibly) for the blinkers. Try using a multi-meter or test light.

[krot84]

I'll try that, thanks!
You'll see my write up as soon as i finish the job.

[r3v_v3ng3]

google the wiring color/locations of the wires needed to install an alarm for your car. Its not hard, use multimeter like okin says so you can verify the wire.