Ashtray Support Screws

[Bostonboy65]

Can some one let me know what type these are so I can go buy them from Lowes? They are the 2 you remove when replacing your radio. My car only had one and i lost it tonight seeing if I had the security module.

[Bostonboy65]

Can some one at least post a pic of theirs?

[Okin DaVanh]

Almost any interior screw will work. Its just a cir clip on the dash side that recieves it. Basically, you can get any interior dash screw or self tapping screw. And the control/brain for your alarm is under the steering column, not there.

[Bostonboy65]

actually code alarms are under the dash the alpine ones are on the right side of your stereo.

[Hocrest]

You're both right on the location of the security module. It depends on the year...

[Okin DaVanh]

It depends on the year...
Thank You.

[Huffer]

Can some one let me know what type these are so I can go buy them from Lowes? They are the 2 you remove when replacing your radio. My car only had one and i lost it tonight seeing if I had the security module.

They're short, fat ones... approx 10mm long, have a pan-head Phillips top, and should be around 5mm diameter.

[prodriver1]

Can some one let me know what type these are so I can go buy them from Lowes? They are the 2 you remove when replacing your radio. My car only had one and i lost it tonight seeing if I had the security module.

They're short, fat ones... approx 10mm long, have a pan-head Phillips top, and should be around 5mm diameter.
ya those little buggers:) I had to buy a stubby Philips just to get them out to replace the green ashtray light.

[harrymaneuvers]

hahah I dropped both of mine down the top of the tranny and console... that is what motivated me to find one of the last OEM accessory outlets to replace the ashtray.

[Bostonboy65]

I'm going to lowes to buy some more and I'll probably but the rf bass knob in the ash try location with some fiberglass.