PDA

View Full Version : Exhaust system question



jjay03
03-04-2012, 08:17 AM
On a 98 legacy whats the difference between the 2.2l exhaust and the 2.5gt exhaust?

chuckthefuk
03-04-2012, 04:19 PM
Different flow performance, inner diameter and part numbers.

EJ22E
http://opposedforces.com/parts/legacy/u ... tration_1/ (http://opposedforces.com/parts/legacy/us_b11/type_5/exhaust_system/exhaust/illustration_1/)

EJ25D
http://opposedforces.com/parts/legacy/u ... tration_1/ (http://opposedforces.com/parts/legacy/us_b11/type_4/exhaust_system/exhaust/illustration_1/)

Swapping to a stock GT exhaust wont yield noticeable results.

-Chuck

Wiscon_Mark
03-04-2012, 06:18 PM
Wouldn't it be different heads (single vs. dual port) for that MY too?

chuckthefuk
03-04-2012, 06:21 PM
he asked about the exhaust = mid pipe + axle back.

not manifold + cat

Wiscon_Mark
03-04-2012, 06:30 PM
Well, he didn't spell it out...

But yes, skip the GT exhaust, doesn't do much extra.

chuckthefuk
03-04-2012, 06:33 PM
i am just razzing

SilverSuby
03-04-2012, 09:11 PM
If I'm not mistaken is your piping is larger than 2.25" you will lose power on a legacy...

xoSubieLegacyxo
03-04-2012, 11:03 PM
If I'm not mistaken is your piping is larger than 2.25" you will lose power on a legacy...

I've seen people put 3" exhausts on their legos. Honestly the best sound and performance exhaust size is 2.5"

chuckthefuk
03-04-2012, 11:06 PM
I beg to differ.. 2.25" .. speaking from someone whos been both ways with both engines.. Proper baffled 2.25" setup with proper back pressure is the optimal setup.

xoSubieLegacyxo
03-04-2012, 11:16 PM
I beg to differ.. 2.25" .. speaking from someone whos been both ways with both engines.. Proper baffled 2.25" setup with proper back pressure is the optimal setup.

Isn't that the stock width?

chuckthefuk
03-04-2012, 11:40 PM
1.75" but flares out to 2.25" in some areas..

xoSubieLegacyxo
03-04-2012, 11:56 PM
1.75" but flares out to 2.25" in some areas..

learn something everyday! lol

Navi271
03-05-2012, 05:56 PM
Ok I gotta ask.

From what I see on those links, the 2.5L midpipe has another cat and a resonator while the 2.2L midpipe has only the resonator? Or are those 2 resonators on the 2.5L midpipe?

chuckthefuk
03-05-2012, 06:05 PM
EJ22E manifold cat/pre cat
http://opposedforces.com/parts/legacy/u ... tration_2/ (http://opposedforces.com/parts/legacy/us_b11/type_5/exhaust_system/exhaust/illustration_2/)

EJ25D manifold cat/pre cat
http://opposedforces.com/parts/legacy/u ... tration_2/ (http://opposedforces.com/parts/legacy/us_b11/type_4/exhaust_system/exhaust/illustration_2/)

They are all pretty much the same but have different revisions... I have seen the single cat setup on GT's however I have also seen more dual cat setups overall.

It all depends on the year/revision

-Chuck