Spec C Control Arms

[Baddog]

Thought I had a thread around here somewhere. If so remove this one.

Been tossing around the idea of spec C control arms. I know the KCA313 (bump steer kit) are the same between the Legacy and Spec C arms.

However the ALK kit I am not sure which one works on the Spec C arm but will mount properly to the BD Chassis.

Same with the inner front. Anyone have any experience with this setup?

[Wiscon_Mark]

No, but somebody is selling aluminum control arms with the ALKs in them:

viewtopic.php?f=22&t=24450 (http://www.sl-i.net/FORUM/viewtopic.php?f=22&t=24450)

[Baddog]

I posted there about it already. I dont want to buy it if it won't work. I know the arms will work. Just not sure about the bushing situation

[rougeben83]

You need to press out the front bushing to fit your NA crossmember. GD's use a 60mm width front bushing, you have a 55mm width bushing. Check WL's parts catalog.

[Baddog]

That is what I was wondering. Would the Legacy style front bushing fit on the Spec C control arm.

And does the whiteline Legacy ALK kit fit the Spec C arm or will the one that came with them fit properly on the legacy?