rdpro219
04-29-2012, 03:15 PM
Im kinda (really) in a bad position here. I was changing out my timing pullys in a ej22 from an engine with only the one right side back timing cover. this gave me one correct place to line up timing. but the others i marked on the metal and lined up the marks on the belt. I have done this before and it worked with no problems. this time it didnt
It will turn, but not fire at all. Now im unsure what exactly to do. I dont have a compression gage to see cyl 1 to get to top dead center. I really dont know which marks to go with or how to get everything back in timing. I hoping that there is a process to get both cams back in order.
also mayb notable.. when i tested it, i had the radiator pulled.. dont know if that might throw something off somwhere.
It will turn, but not fire at all. Now im unsure what exactly to do. I dont have a compression gage to see cyl 1 to get to top dead center. I really dont know which marks to go with or how to get everything back in timing. I hoping that there is a process to get both cams back in order.
also mayb notable.. when i tested it, i had the radiator pulled.. dont know if that might throw something off somwhere.