ags18 - 99 RHD Legacy Wagon: SOLD

[ags18]

***Facebook really f'ked me with image hosting so....for now....I have just dumped everything into Photobucket.
http://s1381.photobucket.com/user/andrew_schmeling/slideshow/99%20RHD?sort=2
------------------------------------------------------------------------------------------------------------------------------

*** Car has been SOLD. Final Photos: PAGE 17 ***

https://sl-i.net/FORUM/images/imported/2012/06/11884055_10153519161822332_4896366008353-1.jpg


Mods:

Exterior:
JDM GTB Front Bumper
JDM Fog Lights
JDM Clear Side Markers
JDM GTB Side Skirts
JDM GTB SPATS
JDM GTB Rear Bumper
JDM Power Folding & Heated Mirrors with Switch
JDM Rain Guards
JDM Red/Clear Taillights
USDM Outback Rear Hatch with Spoiler
SYMS Front Grill
Removed and Shaved Roof Rails (Re-installing Wood roof strips)
All 4 "new to this car" doors from a clean 98 L Wagon
Rear Tailgate Bar
SAAB/Volvo Headlight wipers
USDM Chrome Lower Window Trim

Sourcing: JDM Non-Projector 1 Piece Headlights

Wheels and Tires:
18x8.5, +45, 5x114.3 ALT 332's
Nankang NS-20 Tires (215/40-18)
Circuit Sports 15mm 5x100-to-5x114.3 Adapters

Interior:
JDM Wood Grain Window Switch Trim
JDM Legacy Floor Mat set
USDM Center Console Wood Grain Trim
Installed Tweeters
Pioneer Head Unit
Pioneer Door Speakers F&R
06+ WRX Steering Wheel
Outback Grey Leather Seats F&R
98+ Black Door Panels w/ puddle lights
98+ Outback Headliner with Sunglasses Pocket/Light Console
Wood panel rear floor

Engine:
Perrin Crank Pulley
Borla Header
Fujitsubo Axleback Exhaust
Rallitek Plug Wires
Legacy GT Engine Cover

Suspension:
Whiteline Rear Sway Bar End Links
Whiteline Antiflit front kit
Full Coilovers (*Max Camber: Achieved!)
90-91 Legacy Front Strut Tower Caps

Brakes:
New/Reman Master Cylinder (95-97 style though so had to swap harness plug and reservoir)
Front 2 Piston Caliper upgrade (2.5RS)
New Centric Brake Rotors and Pads (8/24/13)
Rear Disc Conversion
H6 Rear Caliper Brackets with 2.5RS Calipers
New Centric H6 Rotors and Pads
New Brake Lines All around
Proportioning Valve from Non-ABS 90-91 Legacy

Quick Photo History Timeline:

When Purchased
https://sl-i.net/FORUM/images/imported/2012/06/303688_662261531084_812092259_n_zps7d762-1.jpg
https://sl-i.net/FORUM/images/imported/2012/06/197694_662261506134_1124914107_n_zps5c04-1.jpg

De-Blacking, Hatch Swap
https://sl-i.net/FORUM/images/imported/2012/06/293874_668930142134_1064265494_n_zpsa511-1.jpg

JDM Rear Bumper, More De-Blacking, JDM Power Folding Mirrors, Head Lamp Wipers
https://sl-i.net/FORUM/images/imported/2012/06/598751_718655716684_1445364988_n_zps47fa-1.jpg

New Doors (what a waste De-Blacking was!)
https://sl-i.net/FORUM/images/imported/2012/06/75067_706119409544_162766500_n_zps7f3659-1.jpg

Wheel Adapters and Wheels Fitted (Outback Rear Suspension was temporary before coilovers)
https://sl-i.net/FORUM/images/imported/2012/06/10369742_837643853504_687581910280246603-1.jpg

Last time it was out on the road...WCSS16
https://sl-i.net/FORUM/images/imported/2012/06/11141133_957953556894_755297699713194606-1.jpg
https://sl-i.net/FORUM/images/imported/2012/06/1907399_10204485796606609_14432584126825-1.jpg
https://sl-i.net/FORUM/images/imported/2012/06/10610845_10204485821287226_4912497294399-1.jpg

[Navi271]

I'm all about making things your own, so I respect that. And you should have no problem selling those headlights. I bet plenty of people would pay good money for those. Glad to see you're on sli now and keeping the car in the sli family!

[hansvonaxion]

That was Matty2Hotty's car? I guess we can call him Matty2Grotty!

Looking forward to see the transformation.

[Yokosilver]

Great start on it. You planning on repainting for the VIP look? I am interested in seeing where you go with it because that is what I am leaning towards VIP style with mine.

[ags18]

That was Matty2Hotty's car? I guess we can call him Matty2Grotty!

Looking forward to see the transformation.

Yeah. It was his. No, you can call me Andrew. :smt002


Great start on it. You planning on repainting for the VIP look? I am interested in seeing where you go with it because that is what I am leaning towards VIP style with mine.

Thanks. No, the color will not be Silver, White or Black like a luxury VIP might usually be. I'm kinda OCD and I could never live with the fact that under the panels and carpet would always be Spruce Green Metallic! It's going to be hard enough with the engine bay flat black but....I've got plans to help with that! I will be re-doing the entire car in the original color but, will be painting more items than from the factory...Side Molding, Mirrors, Door Handles, etc...

The main "VIP" aspect of it will be in the wheels 8 or 8.5" wide and the interior. Sitting nice and low already and rides great so my stance is juuuust fine.

[hansvonaxion]

That was Matty2Hotty's car? I guess we can call him Matty2Grotty!

Looking forward to see the transformation.

Yeah. It was his. No, you can call me Andrew. :smt002



Maybe it doesn't translate, grotty means dirty so since his car was so dirty we should call him matty2grotty.

[xoSubieLegacyxo]

I need to find myself a RHD wagon. I love how you're transforming the car to your own personal feel. Buying someone else's already modified car is tough to love, so taking out morrettes for stock headlights is reasonable. Can't wait to see how this turns out!

[chrish8r]

I never noticed the spoiler on the back before but im glad to see that the car will be taken care of again by another subaru driver. Cant wait to see where this build goes!!!

[ags18]

I need to find myself a RHD wagon. I love how you're transforming the car to your own personal feel. Buying someone else's already modified car is tough to love, so taking out morrettes for stock headlights is reasonable. Can't wait to see how this turns out!

I more-or-less think that I bought some piece of mind with this rather than someone else's full on project. Engine (new), trans (different/refreshed), suspension and other maint. work gone through and a few cool bits to enjoy or sell. VIN #'s match on all doors but 1, current hood, rear hatch and both rear quarter panels (even though having been hit in the right rear at some point).


I never noticed the spoiler on the back before but im glad to see that the car will be taken care of again by another subaru driver. Cant wait to see where this build goes!!!

Yeah, the Liberal spoiler is a pretty cool piece to the car. It is fun to have it on there but, will probably go the way of the Morette's and get sold. The rear hatch has Cancer and I'm no body man so, a simple swap and a GT spoiler or something NOT fiberglass would be more to my liking.

https://sl-i.net/FORUM/

[ags18]

New (to the car) Hood:

http://sphotos.xx.fbcdn.net/hphotos-ash3/564921_662468780754_2139190309_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc6/602987_662468770774_1298540646_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash3/600833_662468755804_1720940381_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/421502_662468725864_134822532_n.jpg

Perfect scenario. Craigslist, posted mine "FOR SALE" or "TRADE for OB Hood with Scoop". I not only got the OB Hood with Scoop but, its OE Subaru, already flat black and Spruce Green underneath with the insulation and complete OE hood scoop and support structure. All that plus getting paid $50. Done deal! Couldn't have worked out better.

[ags18]

Junk Yard Run #1 for the weekend:

Tweeters, Covers, Owners Manual Folder and Underhood Cowl Trim. $18.xx!

http://sphotos.xx.fbcdn.net/hphotos-snc6/282605_662932421614_2107112361_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-prn1/543296_662933010434_925661346_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash3/600606_662932985484_1959628169_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc7/578167_662932935584_794132472_n.jpg


Junk Yard Run #2: Outback Rear Tailgate with spoiler, wiper motor, complete harness and intact glass.

http://sphotos.xx.fbcdn.net/hphotos-snc6/181801_662932436584_251166521_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc7/598375_662932451554_1318715741_n.jpg
Spoiler removed (sanded and painted flat black already), cleaned and partially sanded most of the tailgate. Leaving some areas Green because that will be the color the car is re-painted when the time comes. I want it all flat black until then though.

Need another sunny day + enough time so I can complete the painting. :/

Liberal Rear Spoiler = the 2 side pieces have been removed, sanded and blended the best I could. Now only the big piece left. Hopefully it comes off OK so I can find it a new home out there somewhere!?

[nikolaus.conrad]

Awesome deal man! Good find on a hatch with a spoiler from the factory! I need to re-seal mine lol

[Dead91silvia]

First time seeing that wing! I love it! Thats what I would have got if I had a wagon! haha

We are working on figuring out the paint work... I dont think it will be too big of a deal.

[ags18]

First time seeing that wing! I love it! Thats what I would have got if I had a wagon! haha

We are working on figuring out the paint work... I dont think it will be too big of a deal.

I was pumped to find this rear hatch at a local Pick-N-Pull. It was there each of the 3 times I went back before pulling it off. So glad it was still around. I cant wait for paint!!! I made the new hatch able to be fitted today and got the Liberal off the old hatch too.

http://sphotos.xx.fbcdn.net/hphotos-snc7/318103_663968575154_2109115568_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-snc7/318103_663968580144_1146173217_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/318103_663968570164_896764877_n.jpg
How the deed was done! Like cutting Clay off a block in art class.

Old hatch gone now that the spoiler was salvaged.
http://sphotos.xx.fbcdn.net/hphotos-ash4/318103_663968590124_2122596842_n.jpg

Center Tail light and wiper arm back on now that my rear wiper works again. 2 motors later.
http://sphotos.xx.fbcdn.net/hphotos-ash3/547246_663968949404_590793684_n.jpg

Tailgate swap all done. I wish the whole car could have been painted in this Trim paint instead of the gritty plain rough stuff it is. O well. Spruce Green will make its return soon! Loving this hatch and spoiler.....way more my style.
http://sphotos.xx.fbcdn.net/hphotos-ash3/547246_663968954394_16182157_n.jpg


Next to come: very limited budget, purchasing a home. Once things settle down after that I will see what can be done!?

*Removal of front lip.
*Removal of the seats and carpet to clean and vacuum underneath
*Re-tint rear window and front 4 to match the rear side windows.
*Paint the WRX wheels.
1. If it ever warms up around here for long enough. :X
2. Color? TBD!

[Reuben]

This thread, it brings tears to my eyes. Well done, VERY well done for de-ricing that BK. Hat's off to you sir!!!

Keep up the good work, and love for the beast!

[ags18]

This thread, it brings tears to my eyes. Well done, VERY well done for de-ricing that BK. Hat's off to you sir!!!

Keep up the good work, and love for the beast!


Thank you Reuben. That is certainly my goal with this vehicle. As close to OEM look, feel, fit and finish as possible with just a bit of aftermarket flare.

The grill and paint will be next to go/change! Might even think about selling the springs that are on it and raising it up a bit but, that decision will come well down the road when I get my wheel and tire package figured out and see how things shake out.

[ags18]

Finally got around to crafting this today! Been in the back of my mind for a while now. :smt023 I only have one and a half planks of wood left so...I need to figure out what I want to do from here. Maybe try and find the same brand again or...leave it as is and maybe put a sub or storage box on the carpeted section. One project always leads to another! :P

http://sphotos.xx.fbcdn.net/hphotos-ash3/598756_665115516674_605911936_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc6/206175_665115531644_297990286_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/306943_665115566574_1681918924_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/252626_665115551604_1658347369_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash3/550870_665083111614_1714113099_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc7/403476_665083276284_1297880651_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/314137_665083326184_1546488808_n.jpg

[nikolaus.conrad]

Nice!!

[Dead91silvia]

Thats actually kinda cool!

[ags18]

Thanks! Turned out pretty good and I can still get to the spare with it being 1 piece. Cant take much weight on top of it right now so I need to figure out a better long term solution.

Sunday 6/24 Happenings!:

http://sphotos.xx.fbcdn.net/hphotos-snc6/269349_665373140394_2086038044_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash3/540943_665373195284_5039777_n.jpg

Puke dirty whiteish yellow (of the old bottle) was not a color I wanted under my hood.


***Next, I was sick of having red, white, black and orange on the back. Time for a change. In a perfect world I will do an all red and orange set but, seeing that the car came with the red and black corners I'll keep it going for a bit. And, they are such an b!t$H to take out I'm not rushing to tackle it.

http://sphotos.xx.fbcdn.net/hphotos-snc6/282981_665373160354_1091652375_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-snc6/602588_665373185304_462265142_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash3/525910_665373205264_513902725_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash4/428377_665373220234_249707662_n.jpg

I will mask off and spray a quick coat on the lower corners as well when I have a chance so the texture matches. Cant go much darker on them though.

***Junk yard find!: I put plastic bags in them for now. I dunno what to use them for!? :P
http://sphotos.xx.fbcdn.net/hphotos-ash4/376475_665373230214_585831520_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-snc7/382549_665373240194_2132559748_n.jpg


***OEM Fog Light Switch wiring and install.
http://sphotos.xx.fbcdn.net/hphotos-ash3/557254_665373250174_1052403694_n.jpg
OEM Subaru Switch: Black = Ground, White = Power, White/Blue and White/Yellow = Power to Switch and Left and Right Lights

http://sphotos.xx.fbcdn.net/hphotos-ash4/380576_665373265144_1982435887_n.jpg

[hansvonaxion]

***Junk yard find!: I put plastic bags in them for now. I dunno what to use them for!? :P


They usually carry the factory tool kit. A pair of multi-grips (pliers), wheel wrench, a couple of spanners and possibly a screwdriver.

[Yokosilver]

***Junk yard find!: I put plastic bags in them for now. I dunno what to use them for!? :P


They usually carry the factory tool kit. A pair of multi-grips (pliers), wheel wrench, a couple of spanners and possibly a screwdriver.
That's what is in mine. Unfortunately, the wheel wrench is the wrong size in my car. Replacing it soon, though.

[hansvonaxion]

Actually I have a tool box permanently in the back now so I've only got the wrench in there. People have been known to use the space for a sub but it looks too small to me.

[ags18]

05+ LGT Engine Cover fitted! - Install write up.
https://sl-i.net/FORUM/viewtopic.php?f=9&t=25147

https://sl-i.net/FORUM/
https://sl-i.net/FORUM/
https://sl-i.net/FORUM/
https://sl-i.net/FORUM/

[Yamazaki]

This thread, it brings tears to my eyes. Well done, VERY well done for de-ricing that BK. Hat's off to you sir!!!

Keep up the good work, and love for the beast!
I second this comment. I never understood the flat black thing.

Excellent thread too (lots of pictures!), but please adjust the thread title to reflect the rules: viewtopic.php?f=6&t=5808 (https://sl-i.net/FORUM/viewtopic.php?f=6&t=5808)

And like Reuben said, keep up the good work.

[hansvonaxion]

Can't say I'm a fan of the engine cover... I think you at least need to cover the intercooler hole with the same mesh on the other hole.

[ags18]

I second this comment. I never understood the flat black thing.

Excellent thread too (lots of pictures!), but please adjust the thread title to reflect the rules: viewtopic.php?f=6&t=5808 (https://sl-i.net/FORUM/viewtopic.php?f=6&t=5808)

And like Reuben said, keep up the good work.

Thank you.

I was unaware of the title correction info. I'll be sure and do this from now on.


Can't say I'm a fan of the engine cover... I think you at least need to cover the intercooler hole with the same mesh on the other hole.

Yeah, I had zero time left to devote to this over the weekend. It will be getting covered. In a perfect world my engine bay would look like this....

http://www.automotiveaddicts.com/magazine/images/2007lexusls460/2007LexusLS460Engine01FixedSmall.jpg

There's nothing to see under my hood and I really only have it open if I'm under there anyway! I'll be working on some black side panels in the near future as well.

[ags18]

http://sphotos.xx.fbcdn.net/hphotos-snc7/295344_667073727404_1596442060_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc6/165942_667073747364_259345745_n.jpg

Cleaner look but now it really looks like its riding a$$ low. The front lip being so low was making the proportions look better front-to-rear. Funny how doing 1 small thing can set off another list of things to think about sometimes! :X

[WESTcoast]

I'm really liking what you are doing to this wagon!! Wish you kept the morrettes but since you say vip maybe time for projectors in the future!?! I really like the wood flooring you did for the trunk, and I mean like it alot!! Is it just that wood flooring that interconnects?? did you use wood glue to hold it together or do you have any brackets underneath to keep the section together?

also the engine cover, I always wanted to do this!! Thanks for the inspiration keep up the good work!!

[ags18]

I'm really liking what you are doing to this wagon!! Wish you kept the morrettes but since you say vip maybe time for projectors in the future!?! I really like the wood flooring you did for the trunk, and I mean like it alot!! Is it just that wood flooring that interconnects?? did you use wood glue to hold it together or do you have any brackets underneath to keep the section together?

also the engine cover, I always wanted to do this!! Thanks for the inspiration keep up the good work!!

Thank you!

Yeah, some projectors are in the cards for a future mod. Lower on the list for 200 of my dollars right now but I will certainly keep the JDM parts flowing in! Next to go is this grill before I really buckle down and save for paint. God what a daunting thought.

The wood floor is a tounge and grove style but, the stuff I used was pretty base line stuff. Nice but, pretty standard and no clip together or self sealing to it. The way I put it together right now is pretty ghetto with duct tape and wood dowels to support it. I fully intend to take the pieces back apart, wood glue them together and cut another piece of wood to glue to the backside for full support. Sounds like I did nothing when I list all the "I want to's" out like that :smt017

****Here was my motivating photo to do the rear wood and it also keeps me awake at night wondering if I should continue on with replacing the current carpeted section and finish it all off!?
https://sl-i.net/FORUM/images/imported/2012/07/4740120207_2487b4c4cd_b-1.jpg

http://wagonlifestyle.blogspot.com/2011/06/white-wagon.html

[Dead91silvia]

Well, I got to see the car in person today, good start! The plans for this are something I know Reuben and Yamazaki will like. The end result should be super clean and one of a kind for sure. :smt023

It's cool meeting members in person! :grin:

Kinda bummed I didnt get to see that wood floor though!

[Reuben]

https://sl-i.net/FORUM/


Oh what the fuck is that, what the FUCK is that!?!

Good god, you know lexus, that's what the bonnet is for, to cover the engine bay. Why the hell would you go cover it all up again!

I don't know about you guys, but i like to see an engine when i pop the bonnet... Not just a sheet of fucking plastic!

[Dead91silvia]

Well, he's got good reasons... It's not the best looking under the hood.

[ags18]

Ehh...I like the clean look of an engine bay that doesn't show off all the goods. We'll see how it progresses. To each their own, right?

Yes...great to finally meet "dead91silvia" in person. We shot the $#!t for over 2 hours I think and put together a nice game plan for getting the exterior of my car whipped back into shape. (Lacquer Thinner all the black off, BG5 Skirts, GT Rear Bumper, Painted side moldings, BG5 side markers, new passenger side fender, remove main roof rack rails, shave holes, body work and prep before paint (all Spruce Green Metallic (handles, side moldings, skirts and lips!)

Few pics of proving the saying wrong..."Once you go black, you never go back"...umm, no. This car is GOING BACK!

http://sphotos.xx.fbcdn.net/hphotos-prn1/553251_667740121944_66320227_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash4/488021_667739642904_1503396651_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-prn1/527900_667739448294_856658353_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash3/599959_667739373444_828274297_n.jpg
**I made this little patch just above where I get in the car to remind me that I need to keep on this and get it stripped down ASAP! Motivation patch!


Side note: Junk yard trip on Saturday (7/7/12) found some goodies that will be installed when I get a chance. Good to have things to tinker with on the side!

http://sphotos.xx.fbcdn.net/hphotos-ash4/417759_667758764584_1418857365_n.jpg
Complete Chrome molding for install after paint.

http://sphotos.xx.fbcdn.net/hphotos-ash3/555564_667759233644_446022120_n.jpg
"Oh S#!T" Handles. I wanted 2 retractable ones for the front and 2 fixed handles for the rear.

http://sphotos.xx.fbcdn.net/hphotos-ash4/208894_667737347504_853803733_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash3/529501_667737597004_761093454_n.jpg
Outback overhead console and dome light. Cut out the headliner as a template and just need to run power up to it and hopefully that roof support is available for use on the underside of the headliner otherwise I'll be needing to do some custom thinking on how to mount it!? :/ The Outback logo will be popped off and replaced with 1 of the many "LEGACY" center console/climate control emblems I have snagged off the 1st Gen Legacy's I've see at the junk yards.

[ags18]

Just purchased today! About 2 weeks and they are here. :)

http://sphotos.xx.fbcdn.net/hphotos-prn1/563998_667879816994_1935707841_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-prn1/541426_667879896834_116701236_n.jpg

$40.00 shipped from NZ

Here are the details on the seller: http://myworld.ebay.com/jankuyado/&_trksid=p3984.m1497.l2754

[chrish8r]

Nice nice nice. Seems like you have the ideas rolling and are getting work done. good job, cant wait to see how this looks when you are done

[hansvonaxion]

I like that you have a clear plan and know what you want to do.

Don't most people want clear side markers?

[Yamazaki]

I like that you have a clear plan and know what you want to do.
Yeah, but I'd say most people have a plan, they just can't/don't carry them out.

And for the record- I am pro-engine covers.

[rocketlegacy]

05+ LGT Engine Cover fitted! - Install write up.
https://sl-i.net/FORUM/viewtopic.php?f=9&t=25147

https://sl-i.net/FORUM/


Damn son that looks fantastic. im stoked i was able to contribute.

[nikolaus.conrad]

05+ LGT Engine Cover fitted! - Install write up.
https://sl-i.net/FORUM/viewtopic.php?f=9&t=25147

https://sl-i.net/FORUM/


Damn son that looks fantastic. im stoked i was able to contribute.
He just needs an intercooler to put in that empty square now :wink:

[Dead91silvia]

My bad, I was gonna get you that link, but you found the right seller anyway.

The jams are look'n good also! :smt023

[ags18]

Having a clear plan is what I'm all about. I never wander aimlessly though a car project! Things most certainly change along the way but, I continue to progress and never want to just let it be.

Thanks rocketlegacy for the engine cover. Working really well!

Dead91slivia: you gave me a task to do a little bit each night to get this show on the road and I am! Yeah, once I saw the markers on ebay I had to jump on them.


I like that you have a clear plan and know what you want to do.

Don't most people want clear side markers?

Maybe in the future if I can find some but, I'm a rare breed and I like Amber lenses. Last night I thankfully realized that the lacquer thinner was starting to strip off the lense tint spray that was on the tail lights. Back to Amber I go!

http://sphotos.xx.fbcdn.net/hphotos-snc7/599379_668006423274_1594975957_n.jpg
*Previous body damage to this panel will need repair and will be done prior to paint. Like nothing ever happened.

[Reuben]

Well, he's got good reasons... It's not the best looking under the hood.

Oh lol, no, i was talking about the lexus, not leggy!

[hansvonaxion]

Yeah the Lexus is ridiculous. I could go into a long-winded explanation of why I think they do it but that's probably not a good idea.

[WESTcoast]

This Thread. Subscribed!!!

[ags18]

This Thread. Subscribed!!!

Welcome! :smt006


I've been ruining my brain thinking about wheels these past few days. Here are some of the front runners so far. Que cheesy, cliche descriptive words..."VIP", "Style Wagon" with a bit of "Stance", etc... I just want it to look great and function on the road while being all that!

https://sl-i.net/FORUM/images/imported/2012/07/enkeiperf_falcon_gmml_ci3_l-1.jpg
17x7 +38
17x8 +45

http://www.dubzdirect.com/wp-content/uploads/2011/07/vision_wheel-shockwave_539_black.jpg
18x8 +38
17x7 +42 (dont think this will achieve what I'm going for)

http://www.bncwheels.com/file/2011_10_14_203906.jpg
18x8 +35 to +47 (varies)

http://www.discounttire.com/product/wheels/t_20111101.velref.gcm.ang.jpg
18x7.5 +42

http://www.discounttire.com/product/wheels/mbmtuc.sm.ang.jpg
18x7.5 +45

Whether a 7", 7.5" or 8" wheel I will go with a 205 tire I think. 7" is tucked in enough, 7.5" = my fenders are rolled already, 8" = the mild stretch should clear the fender pull.

So many different ways to go. No $2,xxx JDM, RARE, 1 off wheels for me. This is a daily driver and I just bought a house so that is where money will need to start going and savings for an R32 GTR when they start to become legal in 2 years! :smt007

[98legwag]

I like those Enkeis. I have 17x7.5 +45 with 205 45 17s on my wagon with wrx suspension. Its a good fit and didn't need to roll anything.

[chrish8r]

I personally like the one in the middle. It has that original look to it and if you are going for the VIP part, those fit very well. Maybe you can get people to photoshop those wheels onto your car to get a better feel.

[ags18]

I like those Enkeis. I have 17x7.5 +45 with 205 45 17s on my wagon with wrx suspension. Its a good fit and didn't need to roll anything.

Thanks. That's the good info I need for this process. I'm already rolled and pulled so a more aggressive offset and or 8" width could be done.


I personally like the one in the middle. It has that original look to it and if you are going for the VIP part, those fit very well. Maybe you can get people to photoshop those wheels onto your car to get a better feel.

Audi A8 Replicas in 5x100 so the Jetta and Golf people can run them. They have been on the top of my idea list since I bought the car. 8" +45 might just fit in there perfectly.

https://sl-i.net/FORUM/images/imported/2012/07/Picture017-1.jpg
*It's a Passat, and gold but....its a wagon!

[Yamazaki]

I like the Enkeis too. I'm kind of hoping the 3rd and 4th choices are there as a joke...

[Dead91silvia]

Wheels #1 are the only ones I like, but thats me...

What about getting a set of OEM 17's from an Outback and painting them? Could look cool!

[Reuben]

Hurrah, seeing that black come off is a nice sight!!!

And no to ALL of the wheels. All far to ricey for my taste. But if i had to chose one, it'd be the first.

Seriously, i don't think one can go wrong with any rays/gram lights, BBS, enkei or factory subie wheels.

[nikolaus.conrad]

The first one wins my vote as well

[Dead91silvia]

How about these?! I thin they could look really cool painted, polished, or chromed... Look aftermarket, yet still Subaru!

http://www.subaruoutback.org/forums/67- ... 350-a.html (http://www.subaruoutback.org/forums/67-classifieds/18222-fs-2009-outback-ltd-stock-wheels-350-a.html)

Or even these....
http://www.automotix.net/keystone/2009- ... 48u16.html (http://www.automotix.net/keystone/2009-subaru-outback_legacy-wheels_rims-aly68748u16.html)

[ags18]

Front and Rear Grey Leather picked up this week and devoted all day today to getting it in. Got a bit side tracked along the way on Friday but....for the best! :cool:

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/555965_668878515594_284761995_n.jpg
Seats out. No big deal. Business as usual and then... "Son of a BITCH...I hate this carpet, it's filthy, caked with mud and its all dirty underneath. That's it Im pullin it!" :smt013

http://sphotos-a.xx.fbcdn.net/hphotos-ash3/552440_668878760104_1917639697_n.jpg
More change found like the first time I pulled some of the carpet up! Couple more bucks today.
*ECU plate was just laying there. No nuts holding it down. Fixed that so the ecu is now nice and cozy.

http://sphotos-a.xx.fbcdn.net/hphotos-snc7/487648_668878899824_437914182_n.jpg
More change, more dirt, more cleaning to be done.

http://sphotos-a.xx.fbcdn.net/hphotos-ash3/539737_668879109404_547531469_n.jpg
I guess my car wants dynamat!? It was just shedding the factory sound coating like it was its job.

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/559076_668879373874_178116756_n.jpg
Yup...f#*$in gross.

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/396083_668879827964_1464693686_n.jpg
Soaking. RHD carpet in black = not easy or cheap to come by. When I have the $200 (or so) ill figure out a different option.

Clean:
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/580814_668879533554_2032561117_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/319311_668879568484_1383982154_n.jpg
If I had dropped food while I was in there after I was done....yes, I would have eaten it. No more dirt.

Reassembly:

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/394757_668879668284_2021811214_n.jpg
Heated seat harnesses. Run from the seats to the switches. I have to go back to the yard to get the male plugs for the switches. This way I dont have to pull the carpet again or try and feed wires in the dark under the carpet.

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/582158_668879917784_354834103_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/205263_668880102414_640190453_n.jpg
Peakaboo! :smile:

http://sphotos-a.xx.fbcdn.net/hphotos-prn1/529538_668880217184_1939093265_n.jpg
I need to go to the bank and get some Japanese Coins for my coin holder. :smile:

http://sphotos-a.xx.fbcdn.net/hphotos-ash3/179157_668880282054_164664415_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/314777_668880356904_1835500669_n.jpg
The vehicle they were pulled from was a 98 OB with only 140K. And from the looks of the light wear on the drivers seat (LHD, US) they were nice on it or light weight!? One or, both! The Passenger seat (my drivers seat) is super fresh. Looks great and couldnt be happier.

Height adjustment is on the seat for my passenger but hey...its VIP! That's where you ride to get driven around by your help!


And..... (yes, AND) more paint removal done today. I finally got it all figured out and the right tools for the job. This is gonna go much quicker!

http://sphotos-a.xx.fbcdn.net/hphotos-prn1/531327_668929967484_458262612_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/531361_668930057304_161641315_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/293874_668930142134_1064265494_n.jpg

[nikolaus.conrad]

Oh my God!! Excellent progress!! You should have left the flat black on the bottom for two tone! :wink: We also have the same steering wheel, nice!

[camroncamera]

Reassembly:

https://sl-i.net/FORUM/
Heated seat harnesses. Run from the seats to the switches. I have to go back to the yard to get the male plugs for the switches. This way I dont have to pull the carpet again or try and feed wires in the dark under the carpet.

Kinda hard to tell, but those blue connectors look a lot like 2nd-Gen JDM Headlight plugs (but maybe smaller?):
https://sl-i.net/FORUM/images/imported/2012/04/IMG_2625-1.jpg

Very impressed with all the work you have done!

[redlegacygt]

i didnt know those steering wheels worked in our cars.. I'll have to check on one.. Car looks great man. Coming along nicely.

[nikolaus.conrad]

i didnt know those steering wheels worked in our cars.. I'll have to check on one.. Car looks great man. Coming along nicely.
The airbags don't plug in and I made the old cruise control lever to fit in the new wheel. Kind of a PITA but worth it IMO :smile:

[Huffer]

Nice progress. I wish I had this much time to devote to my car!

[ags18]

PAGE https://sl-i.net/FORUM/images/imported/2012/07/600pxUS_3svgpng-2.jpg


Very impressed with all the work you have done!

Thank you! I am trying to progress as completely and as cleanly as possible. Those connectors do look identical.


The airbags don't plug in and I made the old cruise control lever to fit in the new wheel. Kind of a PITA but worth it IMO :smile:

Shit. I dont like that part of it at all. :/ I'm not gonna be rolling around with no air bag. Hmmm...?? Now this is yet another thing I need to look into. No light on the dash but, probably just looped or the bulb has been yanked.


Nice progress. I wish I had this much time to devote to my car!

Thank you. I'm just barely finding the time myself. Nothing much during the week but, Saturday's and Sunday's I usually have quite a bit available. I think I'm just kind of a picture whore so, I make it look like I work on it 24/7! :P

[nikolaus.conrad]

The airbags don't plug in and I made the old cruise control lever to fit in the new wheel. Kind of a PITA but worth it IMO :smile:

Shit. I dont like that part of it at all. :/ I'm not gonna be rolling around with no air bag. Hmmm...?? Now this is yet another thing I need to look into. No light on the dash but, probably just looped or the bulb has been yanked.!

The steering wheel in my car doesn't have an airbag because the junkyard said it was "under explosive charge" and wouldn't sell it to me :smt017 Check and see if your wheel has one, maybe it does! Personally, I'm not too worried about driving a car without an airbag, most of my cars never came with one! lol

[ags18]

Yeah. I just want things "right" on my car. I will look into it further later on.

[Thomistopheles]

You could always swap in a momo wheel w/ airbag from a WRX, they look great in legacies.

Making pretty good progress with the paint removal. If I'm not already subscribed to the thread, I'm going to do it now...

[nasioc]

Hi wondering if you plan to sell the morrette headlights how much you asking?
If you want? I have a set of the jdm headlights and to see u interested with a trade+cash?

Let me know?
I'm from queens NY 11423

[ags18]

You could always swap in a momo wheel w/ airbag from a WRX, they look great in legacies.

Making pretty good progress with the paint removal. If I'm not already subscribed to the thread, I'm going to do it now...


I might. It's something I've thought about. Would be more "correct" for the vehicle. Thank you on the progress. I wouldnt wish this process on anyone!! It is pretty time consuming.


Hi wondering if you plan to sell the morrette headlights how much you asking?
If you want? I have a set of the jdm headlights and to see u interested with a trade+cash?

Let me know?
I'm from queens NY 11423

Morrette's are gone. No longer available.

[ags18]

https://sl-i.net/FORUM/
https://sl-i.net/FORUM/

2 - $8.99 door mats from Lowe's. Rear mats are just 1 of the door mats cut in half. PERFECT FITS! :P

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/428843_669766705654_327298930_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/376838_669766800464_1723840504_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/552306_669767089884_1882941947_n.jpg

Mainly a ton of finishing off panels tonight. A-pillars all cleaned off tonight too. Much more to come tomorrow and Sunday. I'm kicking this portion of the projects ass as soon as possible!!!!

[Reuben]

Man, gotta hand it to yah... You certainly did pick a big fight with that paint! I admire the determination!

[Dead91silvia]

Looks great! At this rate you might be ready for body work by the time I get back from the East Coast!

I'll see about talking to ya Sunday and see if we can get you the other parts off that OB you wanted. I fly out Tuesday morning so I might be able to grab those parts for you on Monday. So far I only have one customer car to work on Monday.

[ags18]

Man, gotta hand it to yah... You certainly did pick a big fight with that paint! I admire the determination!

I sure did! I am certainly happily committed to the project though. No letting up in sight.


Looks great! At this rate you might be ready for body work by the time I get back from the East Coast!

I'll see about talking to ya Sunday and see if we can get you the other parts off that OB you wanted. I fly out Tuesday morning so I might be able to grab those parts for you on Monday. So far I only have one customer car to work on Monday.

That would be a good goal to shoot for! I'll see how far I can get in that time? Monday would work. I could get away for a while and help like last time. I'm gonna load up on as much stuff as I can. I'll make a complete list so nothing is missed.

[ags18]

Drivers door and fender. 1/4 hood and a bit of the front bumper.

http://sphotos-a.xx.fbcdn.net/hphotos-snc7/487783_670106694314_376183435_n.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/3065_670106844014_484924157_n.jpg

GTB Rear Bumper (ebay purcahsed, shipping soon, arrival in about a week) Super pumped!! :grin:

http://sphotos-a.xx.fbcdn.net/hphotos-snc6/8082_670108425844_1106160690_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-ash3/531211_670108380934_365149876_n.jpg


Got my eye on some BG5 skirts with spats as well. Just gotta pull the trigger when the time is right.

[camroncamera]

GT-B Rear Bumper win! Was this from Frogg on LegacyGT.com, or did you get this on ebay? Want to pick one up myself to go with the GT-B Limited front bumper I got back in April. I have an extra set of Spats in great shape if your ebay sources don't work out.

[Reuben]

Makes me want to get a new rear bumper... Mine is currently a tad melted thanks to my exhaust.

[ags18]

GT-B Rear Bumper win! Was this from Frogg on LegacyGT.com, or did you get this on ebay? Want to pick one up myself to go with the GT-B Limited front bumper I got back in April. I have an extra set of Spats in great shape if your ebay sources don't work out.

Yeah, this was an ebay score. Very happy with the condition in the pictures and cant wait for it to arrive safely. It's coming out of CA so, that was a huge determining factor to not have it need to cross an ocean to get to me! :smt023


Makes me want to get a new rear bumper... Mine is currently a tad melted thanks to my exhaust.

You make a very good point. It's way easier for you to find a replacement down there so I will certainly be modifying my exhaust hangers and cutting a custom metal heat shield to go in the cut out on the rear lip for my exhaust. Hell...?!? Headers and 3" cat back on my 2.5L motor may not even produce enough heat to worry about it!? :smt017

[AnãO-BR]

My congratulations for the work. Very good taste in upgrades.

Following the topic!

[Dead91silvia]

I have a set of color matched door handles sitting here for ya... I'll leave them in the back of my Chevy if you want to come by and pick them up... You can pay me back later... :smt023

We will get the hubs and what ever else next week or something.

Oh, nice rear bumper! Thats better then the other one I found! You gotta build a heat shield for the exhaust...

[Reuben]

Makes me want to get a new rear bumper... Mine is currently a tad melted thanks to my exhaust.

You make a very good point. It's way easier for you to find a replacement down there so I will certainly be modifying my exhaust hangers and cutting a custom metal heat shield to go in the cut out on the rear lip for my exhaust. Hell...?!? Headers and 3" cat back on my 2.5L motor may not even produce enough heat to worry about it!? :smt017


It was fine for 5 years, being only a CM or so from the bumper all round. But last year I has having a bit of trouble with the WOF (warrant of fitness) guys here, so I had to add an extra silencer into the exhaust. The muppets that did the welding fucked up, and made it so the muffler actually got pushed up against, and touching the bumper. Then it melted. So long as you have no contact, then you're fine.

[chrish8r]

^^^Thats what happened to me. The shop only put a hanger on only one of the two rear spots and now it pulls to the driver side and has melted a nice spot in my bumper.

[Huffer]

Hey there, so you're using lacquer thinner to remove the paint?

[ags18]

Hey there, so you're using lacquer thinner to remove the paint?

Lacquer thinner to remove just the black spray paint that was all over the car. Not the OE Subaru clear coat and Green paint. That will be sanded and body work done later on.

Quite a time consuming process with the lacquer thinner only being effective for about 5-10 seconds after it is out of the bottle. Thankfully the black paint seems to be very weak and once it has been saturated it scrapes off with a plastic scraper quite easily. Sometimes it just takes off a layer or two and then what is left over can be wiped off with a lacquer thinner soaked towel.

http://i.tfcdn.com/img2/2HlquEsAYwo8x8WQXJSYVhJfXFpQkJOZWsyQUVJSYKWvn5mbmJ5arJeTXw4kk_Nz9QuK8lNKk0v0DYwNDC2NoJSRiaG5gbleVkE6AA**/fyVMtP8A
http://www.rickly.com/sga/images/BLUETOWE.JPG
https://sl-i.net/FORUM/images/imported/2012/07/PB358web-2.jpg
*I just like posting pictures. :P

[Huffer]

Great - I am wanting to remove the white paint from my door side strips - it's all chipped up anyway, and there's black plastic underneath that will go with my "panda" theme.

[ags18]

Yeah. Lacquer thinner will be perfect for that I believe. It stripped off all the flat black from mine and left just the raw black plastic and did not make it white or discolored.

[ags18]

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/487219_670842824104_235010637_n.jpg
97 GTB floor mat set --- Arrives on Tuesday (7/31)

Bumper is here in Seattle now and I go pick it up tonight! Woo! :o

[Zac]

Very nice progress, I absolulty love my friends white 96 GTB (Legal in Canada) :D

[peugoby]

Great progress on a neat project. Cheers

[Reuben]

https://sl-i.net/FORUM/
97 GTB floor mat set --- Arrives on Tuesday (7/31)

Bumper is here in Seattle now and I go pick it up tonight! Woo! :o

Niiiiiiice, identical to beasts :D

[ags18]

Update:

*Closed on my house last week so, that's a good and a bad thing for the Legacy. :/

1. Clean, warm, cozy place for her to sleep at night! (+)
2. Better working area for my projects to be completed (+)
3. A LOT less time for projects (-)
4. A LOT less funds available for parts (-)

However...

*I did snag some BG5 Side Skirts with SPATS off Ebay today.
*GTB Rear Bumper arrived last week (good condition, certainly use able)
*Floor Mats will come via UPS tomorrow.

Just sourcing some side molding and figure out what I want to do with my mirrors and then bodywork can start. She's pretty dinged up but, I'm gonna bring her back to glory! :smt023

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/481050_671386195184_1618695706_n.jpg

[Huffer]

Nice big space dude!

[ags18]

Yeah! It's what really sold me.

Once I hack out those shelves on the right side there and get a better cabinet setup on the back walls it will be dialed in. Who knows, If I have the funds and/or stay in the house long enough I might throw in a storage lift...I think there might be room?

[Huffer]

A lift would be baller. They're not terribly expensive to buy, but you have to install them properly.
You could just move the shelves from the side, to the back, and then chuck on some plywood to make doors.

I bought a house a year and a half ago, and am still reworking the garage to suit my spaces... it's a tight fight for two cars, 4 sets of wheels and tires, plus all my yard equipment. I need a storage shed or a bigger garage.

[Dead91silvia]

I got those handles over here also... You can add that to your list of goodies to install...

I like the mats!

[ags18]

A lift would be baller. They're not terribly expensive to buy, but you have to install them properly.
You could just move the shelves from the side, to the back, and then chuck on some plywood to make doors.

I bought a house a year and a half ago, and am still reworking the garage to suit my spaces... it's a tight fight for two cars, 4 sets of wheels and tires, plus all my yard equipment. I need a storage shed or a bigger garage.

Sadly, the garage revamp is about 38th on my list of things to do! :/ I would like to salvage what I can. I'm already planning to use the 60" vanity I ripped out of the master bath somewhere out there too!?

That shed you speak out I do have in the back yard...well worth it! All yard things and automotive things not in use will find their way in there.


I got those handles over here also... You can add that to your list of goodies to install...

I like the mats!

Ugh! Dont remind me. :smt009 haha

I gotta get you the cash for those before anything. The wagon is feeling neglected and will probably continue to be for a bit. In no way will I let it fall to the wayside. This wagon is gonna be what I wanted it to be from the start no matter what.


Floor mats: That JDM style!

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/392286_671737975214_1164574848_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/487052_671738089984_123994876_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/292492_671738244674_1671368341_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/375661_671738349464_234190389_n.jpg

Puttin' the rack to use!

http://sphotos-a.xx.fbcdn.net/hphotos-prn1/539099_671738509144_1393721372_n.jpg

[Zac]

More pics of the wife!

JK

[ags18]

More pics of the wife!

JK

hahaha. She's the GF and, No.

I thought about cropping but, didnt want to take the time. :P

[Dead91silvia]

I'm not super worried, they are just chilling in the shop... Did you still want the rear hubs as well?

[Huffer]

Use the 60" vanity as a workbench. Nail/screw some plywood to the top, bam. Plus you have storage underneath for stuff like drop saws and bigger tools. Hang smaller tools like hammers and whatnot off hooks on the inside of the cupboard doors, put nails, screws, bolts etc into the drawers.

[ags18]

I'm not super worried, they are just chilling in the shop... Did you still want the rear hubs as well?

Me neither but still...i was on a killer roll till the house closed. :/ The car is filthy and still 4 different colors.

Yeah, I want them but, wont need them for months. I should probably hold off and allocate funds 100% toward the paint and body.


Use the 60" vanity as a workbench. Nail/screw some plywood to the top, bam. Plus you have storage underneath for stuff like drop saws and bigger tools. Hang smaller tools like hammers and whatnot off hooks on the inside of the cupboard doors, put nails, screws, bolts etc into the drawers.

That's definitely why it hasn't found the curb yet! It fell a part a bit during demo but, nothing some screws and wood glue can cure.

[Dead91silvia]

Oh hey, Brad says your welcome to his flaky paint roof rails that are starting to look chrome. HAHA... I think we might be shaving the roof rack, but I'm not sure.

[ags18]

Oh hey, Brad says your welcome to his flaky paint roof rails that are starting to look chrome. HAHA... I think we might be shaving the roof rack, but I'm not sure.

Deal! If it makes them easier to "polish" or "chrome" then I'm all for it. Shaving just the side rail holes on my roof was one thing that I was going to run by you when the time came. Just the 8 that go through the roof for the posts, not the center strips.


BG5 Side Skirts and Spats arrived today. Tabs on the back look pretty good for the most part, maybe 1-2 broken ones and will need to replace the seal on the top of the skirt cause it is a little cracked. Overall....happy with'em! Gonna throw them on the shelf with next to the rear bumper tonight. :( So stinking busy I cant get a moment with the wagon to save my life. O well....it's not going anywhere and neither are all these goodies I'm picking up!

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/576031_672769448134_1276122623_n.jpg

[ags18]

GTB Rear Bumper time!!

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/417254_673736405344_1940762695_n.jpg
RED = USDM Rear Bumper Beam
SILVER = JDM Rear Bumper Beam
*I reused the USDM bumper beam. 1. The JDM one had some rust 2. I'd like to save the unibody of my vehicle over a bumper skin and 25lbs saved in the event of an accident.

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/431419_673736340474_1599655548_n.jpg
Wiped it down after this pic. All clean now!

http://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/417544_673642348834_1960132733_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/10436_673737103944_79703734_n.jpg

Also, popped in the side marker lights. I didnt have any wire at the time so they are not hooked up but, glad to have them on the vehicle atleast and not just sitting on my shelf collecting dust. Doing everything I can to get ready for WCSS this weekend! :)
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/s720x720/224279_673642278974_250214536_n.jpg

Side Skirts and SPATS coming soon. Hopefully before the weekend as well!? :/

[camroncamera]

Awesome, nice to hear that the JDM GT-B rear bumper skin is a direct fit over the USDM beam. From my understanding, the mounting points of the rear spats are better aligned to the JDM bumper than the USDM bumper... I'm pretty sure it was Dead that had to slightly modify the bumper mount holes for his rear spats to fit on his sedan. Hope that you let us know how that goes.

[ags18]

Awesome, nice to hear that the JDM GT-B rear bumper skin is a direct fit over the USDM beam. From my understanding, the mounting points of the rear spats are better aligned to the JDM bumper than the USDM bumper... I'm pretty sure it was Dead that had to slightly modify the bumper mount holes for his rear spats to fit on his sedan. Hope that you let us know how that goes.

Yeah, I was happy to see that it fit nicely with it too. There is 1 tab on the beam I need to bang out of the way a bit to get it out of the way of the cover at the top of the exhaust area....no big deal.

The SPATS are a direct line up with the GTB rear bumper I have (Test fitted, installing shortly). You can be sure I'll document the install and process. I've gotta get these damn side skirts on first which requires the drilling about 10 holes per side. Not looking forward to that but, it's just gonna be a case of "measure twice, drill once".

[nikolaus.conrad]

Just use a lot of automotive trim tape, Wagonista did and I plan to!

[ags18]

Just use a lot of automotive trim tape, Wagonista did and I plan to!

Yeah, I guess I could just drill 3 on each side for piece of mind and then tape them down nice and smooth all around. Behind the SPATS and toward the rear will have good sized screws sent through for sure.

[Dead91silvia]

Lots of ways to do it....

[ags18]

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/420110_675294173564_1314873048_n.jpg
The grill I'm going with. Finally made a decision....and a classy, affordable one at that! WIN! A JDM "L7" Green Emblem grill may be picked up in the future but, no rush. Should be picking this up from "dead91siliva" in the next few days or so.

Garage shots from last night. Cant wait to do more work on it and make it cleaner and better laid out and finished.

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/582594_675213859514_1295735115_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/409764_675213924384_1587382173_n.jpg

[Huffer]

Where'd you get those banners from? Those are pretty slick!

[ags18]

Where'd you get those banners from? Those are pretty slick!

Thanks! I've been dreaming of doing this for a long time now!

RAYS and Project U off ebay recently but, Tanabe and J's Racing I've been carrying around for years and years after getting them from a few good connections in the industry.

[eekay]

Way cool! How have I not subscribed to this thread yet?! Haha.

Glad you liked the floor mats, too. Sorry I didn't vacuum them before I shipped. I was in super-retard mode at the time due to all the late-night paint huffin'. ;)

[ags18]

Way cool! How have I not subscribed to this thread yet?! Haha.

Glad you liked the floor mats, too. Sorry I didn't vacuum them before I shipped. I was in super-retard mode at the time due to all the late-night paint huffin'. ;)

There's a lot of good projects on SLI right now to look at and I've been ballz deep in house projects so the Leggy has just been the daily driver from A to B lately. :/

[Dead91silvia]

Dude! Are you guys related?! Look at his headliner! HAHAHA

http://community.ratsun.net/topic/34168 ... ge__st__60 (http://community.ratsun.net/topic/34168-here-we-goon/page__st__60)

[eekay]

Well, that post totally confused me... Lol.

[Thomistopheles]

Dude! Are you guys related?! Look at his headliner! HAHAHA

http://community.ratsun.net/topic/34168 ... ge__st__60 (http://community.ratsun.net/topic/34168-here-we-goon/page__st__60)

Silly datsun, wood flooring is for floors not roofs.

[rhdwago]

looks good man

[eekay]

Dude! Are you guys related?! Look at his headliner! HAHAHA

http://community.ratsun.net/topic/34168 ... ge__st__60 (http://community.ratsun.net/topic/34168-here-we-goon/page__st__60)

Silly datsun, wood flooring is for floors not roofs.
DUDE! Wood roofing can kick serious ass in hot rods. :) Although, not the cheap shit that the dude in the above post used. Pergo/Laminate flooring FTL! :(

[ags18]

looks good man

Thanks man. Have you put up more info on yours on here yet? Welcome to SLi BTW. :smt023

[ags18]

F this "Holding Pattern" BS! I cant take it anymore. This thing is getting worked on.

Dead91Silvia and I started working on the Wagon last night and hashed out a game plan for attacking the body work before paint.

Grill Test Fit....ehhh not so sure yet? Pretty big gap on the bottom that maybe could be filled in with another piece of trip or something? We'll see?
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/228868_679427799744_902568548_n.jpg

Rocker dent pulled by Dead. Door molding on all doors removed.
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/222030_679427814714_963067693_n.jpg

Side rails and middle strips removed for more prep. Polished center strips will go back on after paint. Side rails will be shaved.
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/267216_679427824694_1544531303_n.jpg

[ags18]

Got bored with doing paint removal so, started to paint my wheels. 2 done, 2 to go.
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/598804_679985941224_2048686191_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/404167_679985926254_1393792752_n.jpg

New fender install.
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/399136_679985996114_699958882_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/384103_679986160784_1370576910_n.jpg
:P

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/252577_679986026054_790488540_n.jpg
Only 1 small dent that can be massaged out. Old fender = 10 dents or some $#!t.

Replacing some doors soon as well due to excessive need for body work. Have the passenger front right now and might replace as many as 3 when it is all said and done. :-( Sad to see the #'s matching panels go but...the less body filler needed the cleaner and longer lasting job it will be. :smt023

[nikolaus.conrad]

You should leave all the panels mis-matched! It gives the car so much character! I am glad to see you're making progress! Keep it up!

[ags18]

You should leave all the panels mis-matched! It gives the car so much character! I am glad to see you're making progress! Keep it up!

Thanks. I'm trying to see how ugly I can make it before it gets sprayed! I'm off to a pretty good start. :smile:

https://sl-i.net/FORUM/images/imported/2012/09/imagesqtbnANd9GcTqFtYsFj5L9CpEkqTkAFk7NH-1.jpg
https://sl-i.net/FORUM/images/imported/2012/09/imagesqtbnANd9GcQT01nJnQyPE3LzyxH_uIxx0K-1.jpg
https://sl-i.net/FORUM/images/imported/2012/09/imagesqtbnANd9GcQZNcZIwbL1WeemGtJc_HwiFZ-1.jpg

Not gonna hate. Always loved how crazy the Harleguin's looked! Wont ever own a VW or Audi though.

[Dead91silvia]

I'm thinking of slapping you for even posting a VW...

LOL

[nikolaus.conrad]

They're interesting, I don't think I'd ever own one but it'd be cool to photograph! My Spitfire was nasty looking before it got painted, but I enjoyed seeing the look of once it was all one color. Any car is a completely different car once it's a uniform color.

[ags18]

I'm thinking of slapping you for even posting a VW...

LOL

haha! I said..."I would never own a VW or Audi"!



... Any car is a completely different car once it's a uniform color.

^^^This is the day that cannot come soon enough for me and my waggy. :/

[eekay]

Looking good! Definitely waiting to see the final outcome.

[ags18]

Dropped her off at Dead91Silvia's place last night. Out of town for work for a week and rather than it sit in the garage....I leave it in good hands that can continue the exterior work and progress toward paint!

Dents, dings, deep scratches, shaving...everything is on the list. Cant wait to see it when I get back and really start focusing on getting it ready for being ALL 1 COLOR! :o

:smt023

[Dead91silvia]

Dropped her off at Dead91Silvia's place last night. Out of town for work for a week and rather than it sit in the garage....I leave it in good hands that can continue the exterior work and progress toward paint!

Dents, dings, deep scratches, shaving...everything is on the list. Cant wait to see it when I get back and really start focusing on getting it ready for being ALL 1 COLOR! :o

:smt023

LOL... No pressure.... :smt005

[Huffer]

Now Robin, no re-enacting ferris bueller....

[ags18]

https://sl-i.net/FORUM/images/imported/2012/09/FerrisBuellerFerrari-1.jpg

[nikolaus.conrad]

^ I can totally see that lmfao

[ags18]

Quick reference:
https://sl-i.net/FORUM/
KA POW!!

https://sl-i.net/FORUM/
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/282981_665373160354_1091652375_n.jpg

UPDATE=========

Drivers side:
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/431649_682484389314_2120637546_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/486810_682484753584_121035009_n.jpg

Passenger side:
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/557044_682485052984_1928447159_n.jpg
*I was told the blue tap dots were dents/imperfections in the sheet metal. :( Shaved antenna as well.
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/3474_682485352384_1787602092_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/578483_682485761564_1788334804_n.jpg

[Dead91silvia]

Oh man... Those pics suck! LOL... I took some with my DSLR, much more detailed... I'll post them later. :grin:

[eekay]

Haha. Although the pictures may "suck", I get the gist of it. Looking good thus far!

[Thomistopheles]

Man, that was a lot of dings. Can't wait to see what it looks like when the car's done and painted!

[MonstarMotorsports]

lookin good guys!

[Dead91silvia]

Just shaved the side rails for the rack... finishing the mud work in a little bit. Then first coat of primer tomorrow for the roof and the qt's... :smt023

I'll try and post some pics tonight when I'm done working.

[Dead91silvia]

Andrew asked if I could take some pics of the progress... I sent him some with my phone, but these are taken with my DSLR, so they are a bit bigger and more detailed...

Enjoy! :smt023

Right side
When I rolled her in the shop... QT's were rolled and damaged the sheet metal... errr.... Also she was on the front lines with the parking lot wars.... Doors dings like crazy.
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0741-1.jpg

Almost forgot to get pics... LOL.... Andrew has some though...
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0744-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0747-1.jpg

finding the lows and high's...
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0749-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0750-1.jpg

Found one more ding and it would have drove me nuts not fixing it...
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0781-1.jpg


Left Side
Door dings like hell on this side and all rolling damage.
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0745-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0746-1.jpg

Antenna? Who needs those?!
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0752-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0753-1.jpg

patch
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0756-1.jpg

Welded... Never mind my crap welds on this one...
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0758-1.jpg

Mapping out the door dings.... yeah, the blue dots are dents...
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0757-1.jpg

3rd and last coat of mud...
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0760-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0779-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0788-1.jpg

[Dead91silvia]

Roof rail shaved

So when the customer asks for custom, thats what they get... haha

The studs...
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0751-1.jpg

After grinding the outer off, this is what was left..
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0761-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0763-1.jpg

Uni-bit used to clean it up... and the plugs...
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0765-1.jpg

Normally I do this different, but it wouldnt matter in this case.
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0767-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0766-1.jpg

used house painting tape to hold the plugs flush... (trying to use up this crappy house tape)
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0769-1.jpg

And then an old piece of 80 grit and 2 welding magnets to keep sparks from popping inside... cant damage the interior!
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0770-1.jpg

Also dont want to damage the glass...
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0771-1.jpg

Welded and grinded
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0773-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0774-1.jpg

Ready for primer
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0785-1.jpg

And she's all ready for primer... Andrew is coming to get her tomorrow, so I needed to find a good stopping point for this round. I'll be shooting primer in the morning.
https://sl-i.net/FORUM/images/imported/2012/10/IMG_0786-1.jpg

[ags18]

Wow. :o :shock: :smt023 :smt023

[Huffer]

Rail-less roof. Nice. That's what I was planning to do with my GT.

Quite seriously thinking that I should have Robin find me a nice H6 wagon, fix it up and then I fly out and buy it from him. ;)

[ampped88]

nice wagon!!

[ags18]

Rail-less roof. Nice. That's what I was planning to do with my GT.

:smt010 ...may your wagon RIP.

Yeah, the rails had to go! The 3 center strips will be reinstalled and I've got a line on some that have naturally lost their black finish so it will be easy to polish up and add a subtle shine.

[Huffer]

I still have the center strips on my car if you need them.

[ags18]

Thanks. I should be ok tho.

Robin's friend is the one I'd be swapping with. Just haven't heard anything on it yet and won't need them till after paint.

[Reason]

My legacy needs bodywork wicked bad too... Great work so far.

[Dead91silvia]

Quite seriously thinking that I should have Robin find me a nice H6 wagon, fix it up and then I fly out and buy it from him. ;)

LOL... Let me know... This is Outback country for sure. :smt023

[Dead91silvia]

My legacy needs bodywork wicked bad too... Great work so far.

Yes it does! I will say though, its fun to drive! :grin:



I took more pics yesterday and shot the primer. I can already tell some of my work is not up to my standareds, but the car will be worked on again...

[ags18]

I took more pics yesterday and shot the primer. I can already tell some of my work is not up to my standareds, but the car will be worked on again...

It's amazingly better than what it was...everything is an improvement from what this car was before 1 week ago!

http://sphotos-a.xx.fbcdn.net/hphotos-prn1/23929_683036837204_249676130_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/374398_683036787304_519328421_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/401557_683036932014_1233913497_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/185064_683037021834_1018372652_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/69145_683037081714_165362881_n.jpg
Git out my life Roof Rails! :o

Robin has the better pics that may surface eventually but, I'm pretty excited to have it this far!

[ags18]

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/255487_683085734214_2060491047_n.jpg

Robin notified me the other day that one of the local yards has a RHD Postal! I had to go grab some goodies that I needed or wanted to have as spares should anything ever go wrong. Damn rare/hard to find parts.

Wiper Arms
Windshield Cowl Shroud thing! *Big find, mine is cracked.
Front Door Panel Window Switchs - Driver and Passenger
Shift Knob
Shifter Indicator
Climate control *Mine is kind of sticky on the buttons so, this was a good find too.
Drivers side dash air vent (mine might be darker black and the dial is broke :( ...good to have an extra just in case. Couldnt get the passenger side one out, it cracked in the process.

$35.00!! :grin:

[eekay]

Awesome! I want to attempt the climate control swap SO bad. I have a majority of the parts, but no wiring schematics... Apparently, it's been tried many times without success. I WANT!

[Reason]

My legacy needs bodywork wicked bad too... Great work so far.

Yes it does! I will say though, its fun to drive!

It will be even better next year around that time!

This came out great and glad that you are satisfied with the work. Having that satisfaction that you can take the next step is a good feeling.

[Reuben]

I've never been a fan of rail-less BG's, but the BK's smooth roof just seems to suit it, and you're doing it fucking right! Good shit man, good shit, I'm loving this project!!!


And RHD drive spares... rare? Little shit like that is very easy for me to get, and send stateside. Heck, do you want to ugrade to facelift JDM GTB controls?

https://sl-i.net/FORUM/images/imported/2012/04/IMG_4235-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_4219-1.jpg

[ags18]

Totally agree. Rail-less bubble roofs look silly. They have to have rails. The US flat roof rails just seemed like an after thought by Subaru here and don't really fit the body lines.

Yes, you have all the JDM/NZDM goodies down there Rueben! I probably wont convert the door panels. I've got some US 98-99 Black door panels waiting to go in after paint and body is done. Someday it might be a fun upgrade.

Wheels and Tires (18x8.5....or wider!? :twisted: ), Brakes (LGT or BH Fronts, BH Rears and Calipers) and hopefully making my current suspension work for a while longer with the wheel and tire combo I choose ("Stanced" just for a term to use to describe what I'm after) are going to be my most pressing goals after the paint and body.

I have a 2nd project on my mind and room in the garage to do it so diverting funds away from the wagon will be needed to make it a reality.

[nikolaus.conrad]

Sad to see the roof rack gone, it's one of my favourite thing on these Legacy wagons :smt010

[ags18]

Sad to see the roof rack gone, it's one of my favourite thing on these Legacy wagons :smt010

https://sl-i.net/FORUM/

To each their own. I've just always felt like the roof rails were an afterthought. A bit to tall and thick and the way they are molded to roll down off the side of the roof with the curve didnt sit right with my need for symmetry.

BH or JDM BG rails on the bubble roof would be nice but, I've committed to a life with no rails!

[Dead91silvia]

Sad to see the roof rack gone, it's one of my favourite thing on these Legacy wagons :smt010

Yakima bro... Yakima! :smt023 Way better anyway!

[Reuben]

Sad to see the roof rack gone, it's one of my favourite thing on these Legacy wagons :smt010

I totally agree with ags though, they look stupid/out of place on BK's, just don't suit the rest of the chassis like the BG ones do.

[nikolaus.conrad]

yeah, yeah, yeah. It does kind of look like an after-thought now that it's mentioned but I think it would be a bit difficult to blend into the body with a flat roof! Regardless, it looks great! And it'll look brand new after Robin is finished with it! :smt023

[eekay]

No un-removable roof rails FTW! I did the rail delete myself and I couldn't be happier.

[Dead91silvia]

Here are the last of the pics I have... I didnt get any of it in primer, but I think ags18 got that covered... :smt023

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0790-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0791-1.jpg

https://sl-i.net/FORUM/images/imported/2012/10/IMG_0795-1.jpg

[ags18]

So...made a huge post last night, clicked Preview, finished my adult beverage as I read through it, got distracted...closed the window and turned off my computer. F--K! :O

Anyway....

http://sphotos-b.xx.fbcdn.net/hphotos-prn1/545641_683466032094_943195570_n.jpg

RHD Postal - Front Door trim panels (spares), gas door release lever and surround
BH Front 2 Piston Calipers and Backing Plates
Audi A6 - Door moldings and rear trunk chrome trim
BMW 7 Series wood grain door panel pieces
Legacy Ashtray replacement pockets

Molding test fit:
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/539556_683466446264_1134020975_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/3758_683466531094_2071949941_n.jpg

Wood grain mock up: Gonna take some custom work and creativity...we'll see how it goes when I dive into it. Not sure when that will be tho?
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/26643_683466755644_1192627250_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/249501_683466875404_1620446455_n.jpg

Ashtray replacement pocket install:
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/67163_683466930294_191712820_n.jpg
Re-using the ashtray light
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/548846_683466985184_787875066_n.jpg
Reflective tape for more light output. Drilled the mounting hole and light holes.
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/545731_683467234684_2104314570_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/285747_683467284584_1046129899_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/36560_683467364424_1735527470_n.jpg
Turned out ok. Might pull it back out at some point and clean up the holes or cut them out into a rectangle shape. Does the job!

[tecnica technician]

any luck getting the CLIMATE CONTROL to work i really want to do this as well since mine is starting to act up the light no longer work and it has trouble switching from floor to defrost the the heat and the ac still work but every thing ells is shot

[ags18]

any luck getting the CLIMATE CONTROL to work i really want to do this as well since mine is starting to act up the light no longer work and it has trouble switching from floor to defrost the the heat and the ac still work but every thing ells is shot

No, I'm sticking with the OEM US Subaru climate control. The postal vehicles had the same style (knobs, buttons and dial) as the LHD US 95-99 Legacy's and I found a wrecked postal at a local yard I pulled the Climate Control unit off of...thats the one I will eventually swap over, no more sticky buttons!

Sorry to hear your troubles. To be honest that is why I'm not going to do it anytime soon...maybe years down the road. This car isnt goin anywhere!

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/282801_663067351214_2098798481_n.jpg

[Reuben]

Mmmmmmm, RHD just looks good :D

I still don't like that wheel... I wish I could ship you a GTB momo!

[ags18]

Mmmmmmm, RHD just looks good :D

Mmhmm! And it just feels so, RIGHT! :cool:


I still don't like that wheel... I wish I could ship you a GTB momo!

Came with the car! :P I don't mind it cause there's more area to grab, un-interupted, on the wheel by center connecting points.

[nikolaus.conrad]

I still don't like that wheel... I wish I could ship you a GTB momo!

Came with the car! :P I don't mind it cause there's more area to grab, un-interupted, on the wheel by center connecting points.
Better than the ugly one from the factory :cool: I like mine a lot! :smt019 :grin:

[Dead91silvia]

Mmmmmmm, RHD just looks good :D

I still don't like that wheel... I wish I could ship you a GTB momo!
I have one on the way! :grin: And my H6 BH has one also! The cool looking woodgrain one's! I just need some Momo airbags! :-(

[rkrenicki]

Does the cruise work on that steering wheel? I know it has a different cruise joystick and connectors from the Gen 1 through 3 cars..

[ags18]

Does the cruise work on that steering wheel? I know it has a different cruise joystick and connectors from the Gen 1 through 3 cars..

No, it doesnt work. My car unfortunately isn't even equipped with it at all. :(

I have looked into how to take it off but saw that the assembly goes back in behind the air bag....i'm just gonna leave it.

[ags18]

http://sphotos-b.xx.fbcdn.net/hphotos-prn1/67180_684934903464_1020816574_n.jpg

Continuing my seemingly never ending parts accumulation! Probably gonna throw it on tomorrow.

2 holes to drill...no sense in letting it sit on the shelf. :smt028

[Dead91silvia]

Get it done now that way it wont mess with the new paint when it's done! :smt023

[Reuben]

blarg, why'd you go get one of those!!! Ah well to each their own eh :P

[ags18]

blarg, why'd you go get one of those!!! Ah well to each their own eh :P

It's going to add some polish to the final product and they are a discontinued Subaru accessory that weren't on many cars! I like that about it as well. Yes, to each their own.

I'm getting very close to "Pulling a Reuben" btw...I think I just need to go see the vehicle and bite the bullet and do it.

https://sl-i.net/FORUM/

[Dead91silvia]

blarg, why'd you go get one of those!!! Ah well to each their own eh :P

It's going to add some polish to the final product and they are a discontinued Subaru accessory that weren't on many cars! I like that about it as well. Yes, to each their own.

I'm getting very close to "Pulling a Reuben" btw...I think I just need to go see the vehicle and bite the bullet and do it.

https://sl-i.net/FORUM/

I'm not a fan of those pars ether, but some people like 'em...

An yes, Andrew... You NEED a RHD 1st gen.... :twisted: :grin:

[Reason]

Yea I like the bars, I always wanted to see how it would look on my sedan.

[Thomistopheles]

I was secretly hoping someone with a sedan would buy the bar from me, it would have looked tough on a BD. But nooooo, ags18 had to go and buy it, ruining my dreams :lol: Just kidding, it went to a good home. It's a nice accessory to have, but it would have looked really strange on my debadged hatch.

[Reuben]

http://jtmon.wippiespace.com/DO-IT-FAGGOT.jpg


I'm getting very close to "Pulling a Reuben" btw...

https://sl-i.net/FORUM/




And side note, you don't want some factory Jap flush bump strips do yah? FWA2500 has a set he's not using which you could have.

[Dead91silvia]

^ LOL....

And if ags18 dont want the stirps, I might :grin:

Actually I need some for a project I'm working on. Red85celica is letting my borrow his for now, but I know he wants them painted and installed soon.

[ags18]

https://sl-i.net/FORUM/

Wow...dunno if you'd be happy for me or angry with me now!? :o :P

[Reuben]

What do yah mean, do you not know the meme? Sheesh... Look at his maniacal grin, he WANTS you to buy a first gen, he DARES you to buy a first gen :P

[hansvonaxion]

I've always thought those bars were for elderly and/or disabled.

[Dead91silvia]

I've always thought those bars were for elderly and/or disabled.

:smt005

[fwa2500]

And side note, you don't want some factory Jap flush bump strips do yah? FWA2500 has a set he's not using which you could have.

hey now, they will be on eventually :lol:

[Thomistopheles]

Jeez, so much hatch bar hate going on... You're all just jealous that your car doesn't have a built in towel rack for the beach.

[wentz912]

Dibs on the JDM grille if it isn't gone already. I'm not all that far away from ya!

[eekay]

Willem Defoe FTW!

I also like the rear hatch bars. Not so much for the look but to keep my grubby hands off my hatch when I close it. Nothing bothers me more than a clean car with a shitload of handprints all over the back of it...

[ags18]

@Reuben: No, I'm sorry. I dont know the meme or the movie taken from! Sorry. :/

On other news, I've got no work in the pipeline for the waggy. Not even this controversial tailgate bar. I had a death close to me that I need to support and the car will be very low on my list, not to mention starting a new job in 2 weeks. Bunch a shit goin on lately. :/

Ill be checkin' in on SLI as much as possible tho! :D

[98legwag]

Its from Speed 2.

[hansvonaxion]

Ags, sorry to hear the bad news.


I also like the rear hatch bars. Not so much for the look but to keep my grubby hands off my hatch when I close it. Nothing bothers me more than a clean car with a shitload of handprints all over the back of it...

There's actually a handle in the hatch.

http://img.photobucket.com/albums/v291/hansvonaxion/Legacy/hatchhandle.jpg

[nasioc]

Handle bar makes the rear looks rugger...

[eekay]

There's actually a handle in the hatch.
Yeah. That handle gets the rear hatch about halfway down. After that I need to push from the outside. It doesn't just shut under it's own weight.

[Reuben]

Hehehe, poor Ags, getting all the verbal abuse for his tailgate bar. Man I wish DOBC was this ruthless!!!

You'll live though, I always cop it from those who think you gotta modify the f*ck out a cars visual side to get respect... But why the fuck would I change the beast, he looks fucking badass!!!

[ags18]

Well the past few weeks has been shitty...life, weather, car, job change all leading to stress and spending.

@Reuben: I aint mad! I can take it. I build my car the way I want...there isnt a sole on this planet that can ruin my ideas or love for the wagon.

My wagon is reaping the benefits of it all though. :)

1. Now have both 98-99 front headlights. *Huffer's waggy will live on just a little bit out here in WA.
2. Japanese Parking Permit decal - Green to match the car (Geeked out for a bit one day!)
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/545417_687451814554_1232879068_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/530680_687451844494_1942288428_n.jpg
3. Japanese Registration Number decal - Green to match the car.
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/12734_687451864454_426528794_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/1012_687451894394_1599310657_n.jpg
4. GTB Heated and Power Folding Mirrors
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/247747_687451939304_1256116098_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/530675_687451919344_1419456070_n.jpg

Also, I'm in the process of tracking down these for the wagons door molding. Might even by new through a connection I have at a local VW dealer.

5. 97-04 ish VW Passat Door Moldings with Chrome top accent trim
https://sl-i.net/FORUM/images/imported/2012/10/KGrHqUOKnIE2dBNkvgBNs5OIwj3g_3JPG-1.jpg
The height is almost perfect at 1 3/8" and the length is longer on the the VW so, some careful trimming and double sided tape and I'm golden.

And last but not least Dead91silvia came out of nowhere and informed me of a local parking pole source! Ummm, yes please.

[Yamazaki]

Just so you know, that's not a parking permit.

[ags18]

Just so you know, that's not a parking permit.

Hmm!?! Whats the true use for it?

I know this is the "true" parking sticker for the back left rear window.
http://www.iloveracing.com/images/jdm101sml.jpg

[Yamazaki]

It goes in the top-left hand corner of your front window to show when your JCI inspection is due.

[Dead91silvia]

It goes in the top-left hand corner of your front window to show when your JCI inspection is due.

I remember talking about this in my Pulsar thread... You could come by and look at the Pulsar and the 180sx in my driveway if you want to take a look... Both cars still have them.

[ags18]

It goes in the top-left hand corner of your front window to show when your JCI inspection is due.

Ahh. OK! I knew the placement of it but, was a bit uneducated on the meaning. Thank you.

For the rear parking decal I need to wait to get the tint removed before I put one on. Who knows when that'll be!? :/

[Yamazaki]

Why would you want those stickers anyway? They are total visual clutter and I would remove them all from the S401 if they weren't so hard to get to (and I wasn't so lazy).

[Dead91silvia]

Why would you want those stickers anyway? They are total visual clutter and I would remove them all from the S401 if they weren't so hard to get to (and I wasn't so lazy).

I can tell you why... It's the same reason I left mine on my Pulsar. It's JDM...

I understand why you dont care much for them at all. You have lived there for years so it's nothing new, if not annoying, for you since you have seen or had them. For us it's something kinda fun and cool since it's from Japan.

I've thought about it also, but only for the Pulsar... :smile:

[Yamazaki]

Okay, fair point. I admit that I would like European taillights (with the rear foglamp) or 'Liberty' badge from Australia. But not enough that I would go buy any of it (again, laziness has a part in this too).

[ags18]

Why would you want those stickers anyway? They are total visual clutter and I would remove them all from the S401 if they weren't so hard to get to (and I wasn't so lazy).

I can tell you why... It's the same reason I left mine on my Pulsar. It's JDM...

I understand why you dont care much for them at all. You have lived there for years so it's nothing new, if not annoying, for you since you have seen or had them. For us it's something kinda fun and cool since it's from Japan.

I've thought about it also, but only for the Pulsar... :smile:

^^He beat me to it. Pretty much everything I would have said.

I get the same reactions and questions why I bought a RHD Postal Vehicle daily! :P

I've had 15 Cars, all Japanese and all somewhat or mainly JDM style related. I've held off for years and years, after many LHD US cars with buying things like power folding mirrors, parking pole, and yes, these JDM pieces of "flare"...this wagon I am going all out on with the way one might find it along side the road in Japanland! I'm even so nuts that I still can't talk myself out of swapping on/in a US Outback roof for it! :/

[nikolaus.conrad]

I'm even so nuts that I still can't talk myself out of swapping on/in a US Outback roof for it! :/
Why not just do a RHD swap on an Outback? I don't want to sound critical but that seems like less work than having to make your car a convertible and line up everything perfectly again. Lol

[ags18]

Nah. I have no interest in RHD conversions and this wagon is done in another $2,000 or so.

It's a pipe dream...once it's not my daily driver anymore who knows what I'll get into with it though?

[Dead91silvia]

Really you only need to do the roof skin...

[Huffer]

^^ yep, the structural parts are all the same. Only difference is the leading edge where the bubble starts... find a hit Outback, cut the roof skin off, cut out the Legacy roofskin, weld in the Outback and apply the correct roof rails (or not). And then paint.

Lotta work though...

[Dead91silvia]

^^ yep, the structural parts are all the same. Only difference is the leading edge where the bubble starts... find a hit Outback, cut the roof skin off, cut out the Legacy roofskin, weld in the Outback and apply the correct roof rails (or not). And then paint.

Lotta work though...

You never know... I might get a parts car again... :smt023

A roof wouldnt be as bad as say... welding a car that has been cut in half together again... :grin:

[Thomistopheles]

I like where this is going... step roof, dooo eeeeeet

[VERM]

Preferably the roof skin off of a totaled outback limited with the split sun roofs!

[nikolaus.conrad]

^^^^^ +1

[r3v_v3ng3]

:smt023 This car is coming along real well. Good job and dead91silvia for the body work and pretty sure the paint job

[Reuben]

Hey ags, on this jap sticker thing... Just so you know... They didn't make BK's in japan.... You're putting JDM stickers on an american made, assembled, and USDM only vehicle.




















trolololololololol :D

(I hope you're starting to get my sense of humour ;))

[Dead91silvia]

^ what an ass... :smt021


:smt005

You do know that 99% of people wont know that BTW... Even Subaru people ask him how he imported it... ROFL!!!!

[Thomistopheles]

Hey ags, on this jap sticker thing... Just so you know... They didn't make BK's in japan.... You're putting JDM stickers on an american made, assembled, and USDM only vehicle.
It really needs that JDM twin turbo engine, too... since we all know single turbos are for suckers who don't know that two turbos provide twice as much turbocharging.






trololo back at ya :lol:

[Dead91silvia]

Hey ags, on this jap sticker thing... Just so you know... They didn't make BK's in japan.... You're putting JDM stickers on an american made, assembled, and USDM only vehicle.
It really needs that JDM twin turbo engine, too... since we all know single turbos are for suckers who don't know that two turbos provide twice as much turbocharging.






trololo back at ya :lol:

Heh... heh heh... BRAHAHAHAHAHAAHAHAHA!!!!!!!! :smt005

[nikolaus.conrad]

Naw EJ25D swap, most reliable engine ever!!!

[Reuben]

Hey ags, on this jap sticker thing... Just so you know... They didn't make BK's in japan.... You're putting JDM stickers on an american made, assembled, and USDM only vehicle.
It really needs that JDM twin turbo engine, too... since we all know single turbos are for suckers who don't know that two turbos provide twice as much turbocharging.



Oh shit, I didn't know that! feck! Maybe I need to go start hunting for TT parts and revert beast back...

[ags18]

:ATTENTION: SLi members and all Japanese brand manufactured car modifying enthusiasts in the United States and all Left Hand Drive countries. STOP modifying your vehicles with JDM (Japanese Domestic Market) parts or items.

They never had them in Japan!
You are not fooling anyone!
Why are you doing such a thing with your money?
Quit paying the outrageous shipping charges!
Buy that Legacy GT Wagon and be happy with what you have.

That is all.






:smt002 This is my humor at work. haha

[Dead91silvia]

What a nerd... haha

[Reuben]

C',mon now, settle down ags, there's no need for that attitude around here alright. Be a team player ok, get with the game.





https://sl-i.net/FORUM/images/imported/2012/11/trollgif-1.jpg

[ags18]

C',mon now, settle down ags, there's no need for that attitude around here alright. Be a team player ok, get with the game.

https://sl-i.net/FORUM/images/imported/2012/11/trollgif-1.jpg

Haha. I'm all good man. I always do what I want with my car.

Everyone has their own tastes. That's what makes this hobby fun!

I'm just sticking up for my decals. In my eyes it's no different than any other JDM Subaru piece added to the car. RHD in the US is rare and illegal till 25 years old. I LOVE true JDM vehicles Honda, Toyota, Subaru, Nissan....all of em.

Sadly, I had my registration sneak up on me and don't want to waste what I paid but next year I will be getting a personalized license plate..."HOMAGE" or "TRIBUTE".

With this wagon being so reliable and practical I don't see myself owning another LHD car again.

[ags18]

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/613_690178550154_1908393291_n.jpg
99 OB Headliner. The original one in my car was dyed while it was still in the car by the old owner and after all this time has still not set correctly so when you wipe your fingers on it the dye comes off on your hand. Not havin' that! Plus, the cut out for the Outback Roof Console will fit up in there perfectly now.

https://sl-i.net/FORUM/
Roof Console mentioned above. Removed the "Outback" logo, re-glued on a 90-94 Legacy logo that came from the center console around the heater controls.

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/308702_690178819614_1268438790_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/3697_690178929394_463466092_n.jpg
Power Folding and Heated. Might tackle the wiring and testing but, probably wont install till after paint.

[Wagonista]

When I was in asia my absolute favorite thing was that most of the cars had power folding mirrors. It's just so retardedly amusing.

[eekay]

That's because the roads are so damn narrow. You probably also noticed that most cars have small lights on the front left and right of the hood that are visible to the driver. These help you know exactly where your car is on the road so you don't clip something or someone while driving down a 5-foot wide road... Those crazy Asians!

[r3v_v3ng3]

For the headliner, I'm doing the exact same thing for my wagon. Whats funny is that I have a 97 outback but it didn't came with that headliner/interior light w/sunglass holder. I'm going to install it tomorrow. You don't have the mounting plate for that console? It uses a different mounting than the regular interior light console

[ags18]

For the headliner, I'm doing the exact same thing for my wagon. Whats funny is that I have a 97 outback but it didn't came with that headliner/interior light w/sunglass holder. I'm going to install it tomorrow. You don't have the mounting plate for that console? It uses a different mounting than the regular interior light console

Yup. Got the bracket already and I've installed it. I used large zip ties and put some foam between the bracket and the roof support just to make sure it doesnt give me crap down the road!

http://sphotos-b.xx.fbcdn.net/hphotos-prn1/545379_683317594564_19785992_n.jpg

[ags18]

New pics of my (temporarily) Rat Rod Subie! :/

Love this thing to death but, its beginning to be a pain in the ass with how much work I have done and STILL need to do. I just have to keep remembering that that's half the fun of this hobby!

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/542685_690603877794_1265903117_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/304436_690603897754_369888031_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/46214_690603917714_1288386842_n.jpg
https://sl-i.net/FORUM/

In all her glory.

*Flat front tire today and....brake booster leak have sidelined her from street duty for now. Hopefully, a company car is close so she can stay in the garage, get fixed and continue on the body work. We'll see!? Stressful but, I'm not stopping on this RHD.

[Wagonista]

She'll look great when she's painted with those pretty little JDM bumpers...

[Yamazaki]

Love this thing to death but, its beginning to be a pain in the ass with how much work I have done and STILL need to do. I just have to keep remembering that that's half the fun of this hobby!
Brother, I know 100% how you feel....

[Reuben]

You can't say it isn't looking good! All the parts are fitting together beautifully

[Dead91silvia]

You left out the pic that you sent me last night with e doughnut! LOL

I might have some more room soon and soon as this Z car is gone and that might be early this week.

[wentz912]

So how much drop/what size tires are you running? Sorry if it's mentioned earlier in the thread and I missed it.

[ags18]

You left out the pic that you sent me last night with e doughnut! LOL

I might have some more room soon and soon as this Z car is gone and that might be early this week.

Here it is! :/ And....it'll be at your shop VERY soon and we'll get cracking on this thing in a BIG way.
For all that dont know..... This image is as a resuly of a nail in the tire finally let out all the air. Aaannnd....on the drive home after this happened my brakes failed on the highway. Scared the shit out of me but, I found that no lines were broken it was the Master Cylinder and Booster leaking where they join together. I was out of fluid but able to pump the brakes and get pressure. I kept my following distance GIANT and kept my left had on the E-brake the entire way home.

https://sl-i.net/FORUM/

[ags18]

So how much drop/what size tires are you running? Sorry if it's mentioned earlier in the thread and I missed it.

04 Sti Struts
Tanabe GF210 Coils

No clue what the overall drop is from stock. It's kind of level but, the butt does sag just a bit.

[Dead91silvia]

Yeah, the Z car will be gone on Monday, it's loaded on the trailer and ready to go. I have a couple masters sitting around so we will see if that fixes the brake problem.

[wentz912]

Would you mind getting a measurement from ground to center of wheel well front and rear for me sometime? Trying to decide if I want to throw on these H&Rs I've got, or flip them and save for coilovers.

[amgarrety]

I'm a little disappointed I never looked at this thread before now, this is a great looking build. You may be one of the only 2nd gen builds ill be keeping a close eye on :P

Great work so far. I can't wait to see what else you have in store.

[ags18]

Haha...Thanks for following along! Its a pretty busy Members Ride section and I've been out of the top 10-15 for quite sometime due to funds, rainy season, work, my 2nd car...the list goes on! :/

There is certainly a lot instore for this thing before Spring/Summer...I'm not watching another show/cruise/meet season go by with it looking like this and what it should look like just a picture in my head.

New door panels and body work are next and then it sits again untill $$$ is saved for paint....wish I had more flashy news to report. :(

[r3v_v3ng3]

Looks like you had your moulding shaved. Are you keeping it that way or are you gonna take the jdm molding from dead91silvia :twisted: :smile:

[Dead91silvia]

Looks like you had your moulding shaved. Are you keeping it that way or are you gonna take the jdm molding from dead91silvia :twisted: :smile:
No one is taking my goodies off my GT-B :smt027

[d1giPhux]

Damn, did you have ANY rust on your car!!?! LOL. Gotta love living on the salt coast.. your car would NOT look that pretty! Gonna be awesome when its painted!

[Dead91silvia]

Damn, did you have ANY rust on your car!!?!

Whats that?! :smt005

[rstimpreza]

i like how you build this car a lot easier to buy JDM parts since its already a postal/RHD car. keep up the good work!

[Matty2Hotty]

Ewww... cant believe how gross the car was on the interior, then again when i pulled the radio out and steering wheel i cleaned up some really nasty stuff. The previous owners beat the living crap out of the interior. Glad to see someone actually doing it the "right" way, but sad to see some rare parts come off the car. Everyone has their own likes and style though. As far as me... sure enough I got another Subi but not a legacy, just 04 RS as the market was slim picking for the last 2 months( been looking for another BE Limited Outback Sedan but no luck :( )

[ags18]

Ewww... cant believe how gross the car was on the interior, then again when i pulled the radio out and steering wheel i cleaned up some really nasty stuff. The previous owners beat the living crap out of the interior. Glad to see someone actually doing it the "right" way, but sad to see some rare parts come off the car. Everyone has their own likes and style though. As far as me... sure enough I got another Subi but not a legacy, just 04 RS as the market was slim picking for the last 2 months( been looking for another BE Limited Outback Sedan but no luck :( )

Yeah, it was nasty from its "service days"...all good now though.

Yes, there were lots of parts taken off and changed but, they will be going to new homes/cars where they will be re-loved.

I'm committed to making this thing a show stopper so, stay tuned! Certainly wont happen overnight (unfortuntley) though but, it will get there.

[willbhere4u]

Did your car come with cruise control or did you add it? I have a 1995 legacy RHD postal I want to add it to.

[ags18]

No, I don't have cruise yet, just picked up the switch a while back.

t is something I want to add down the line though...OE or aftermarket.

[Reuben]

That's a japanese (JDM) front (face lift) bumper mate. Should be a few on ebay.

[ags18]

Hey my name is AL I have the same rhd wagon in new York
I would like to know where you got the front lip.i am interested.your wagon looks deadly

Im pretty sure that the front lip was made to fit from a 05+ Legacy GT or an STI Limited Front Lip. It was just on there with screws when I got the car. I might be putting it back on after paint...we'll see? And yeah, the bumper is a JDM BG5 front bumper, not anything US.

[ags18]

Finally...moved the car over and starting working on it! Felt amazing to start up on it again. :)

Volvo 850 Wiper Motor (Test fit at the junk yard)
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/533549_697773644524_599726754_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/224834_697773594624_260327278_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/154899_697773609594_481093866_n.jpg

SOLD!

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/156264_697773669474_1733414559_n.jpg

Also picked up some Cadillac Fog Lights to start working on "Intersection Lights" for the front bumper as well.

http://sphotos-a.xx.fbcdn.net/hphotos-ash3/31558_697773679454_1852734867_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/156292_697773689434_317260540_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/205041_697773709394_996079611_n.jpg
I will be running the USDM 98-99 Headlights and the Corner Lenses will be sprayed Amber. I'm a Honda guy deep down (flame on if you must...but, we are who we are!). Because the headlights are so short I may need to make my own wiper arms and blades but, that wont be too much trouble. I hooked them both up and they work just fine. I'm going to need to read up on the wiring so that they operate together in sequence. No idea on how to make that happen right now?


http://sphotos-b.xx.fbcdn.net/hphotos-snc6/8865_697773729354_896398413_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/576512_697773739334_427511405_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/6950_697773749314_242744853_n.jpg
Hooked them up to see what kind of beam they throw. I like it! When it's aimed at the ground it will be a nice crisp pattern.

http://sphotos-a.xx.fbcdn.net/hphotos-snc6/184585_697773764284_508298434_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/31547_697773774264_513499155_n.jpg
This is where they will go. I had to call it quits to sit back and think about how I will be cutting my bumper....I know I can do it but, nerve wracking none-the-less. :/

For those who dont know what the idea behind these lights is....
https://sl-i.net/FORUM/images/imported/2012/12/6546900065_large-1.jpg
https://sl-i.net/FORUM/images/imported/2012/12/39315384016_large-1.jpg
https://sl-i.net/FORUM/images/imported/2012/12/33178630039_large-1.jpg
https://sl-i.net/FORUM/images/imported/2012/12/zxi4wd2-1.jpg

[Reuben]

Weird... Ah well, whatever floats your boat. Btw, they did amber-lens-indicator-projectors in japan btw. Very rare, but i've see a few grand wagons and gtb's with em. (you could also option the USDM style tails and garnish with the orange)

And regarding the intersection lights... you DO realise that you already have them on the car... Right now... Right??? The lamps either side of the fogs light up the footpath to the left or the right of the car, when the indicators are on. Or did you not know that? So please don't mangle that beautiful JDM faceligt bumper to add something the car already has!!!