split fuel rail mod need advice

[legacy360.]

so i just modified the fuel delivery on my subie in preparation for a turbo down the road. now i am faced with a problem. ok so i used 2 passenger side fuel rails to maintain pressure on both sides of the engine, but i have run into a problem. what do i do about the second Fuel pressure regulator? do i just route the second FPR with a T into the original nipple for the passenger side rail?
left side of image = new rail on drivers side. right side of image = stock passenger rail.
http://imageshack.us/a/img10/9956/0419131546.jpg

[chuckthefuk]

more info more pics please.

[anothernord]

Yeah, both FPR's return lines need to T together and go to the return line to the gas tank.

[Reason]

I'm doing a parallel fuel mod but I'm using one aftermarket FPR. I can send you the info I have, but its a whole different setup than what you got going on here so it might not even be any help...

[legacy360.]

anothernord: thank you i have that down. what i mean is the vacuum line that comes off the FPR. ill upload more picks soon.

[r3v_v3ng3]

You can just T off any vacuum lines for the second FPR.

When I did mine, I took off the stock FPR and used another fuel rail line. I then ran it thru a aftermarket adjustable fuel regulator.

[legacy360.]

thank you :) should have this done this week if all goes to plan