2nd gen side skirt hardware

[98legwag]

Does anyone know where I can get the hardware for mounting side skirts? Preferable for cheap? I have a few clips, but most if it is broken/missing. Thanks.

[r3v_v3ng3]

I've heard others use double sided tape but I'll keep you in mind next time I come across a GT skirt and get all those hardware for you. Do you also have that small L shape cap on the end by the rear doors?

[98legwag]

Thanks. I know there is a BD GT at my local yard. I may go there. Ill get a pic of the rear doors tomorrow. My friend is going to scope out the skirts this weekend hopefully and we may figure something out then.

[98legwag]

I looked at my friend's GT. I don't have the L shaped clips you are talking about. I have a friend coming over tomorrow so we may see what we can do to mount the side skirts.

[Thomistopheles]

From my MR1 thread:

PN 96058AC001 for the clips. You will need 14 clips total, 7 on each skirt.

The first step is removing the mudflaps. They can be a pain in the ass to get off... Keaton cut mine off because the hardware just spun in place. Remove any clips from the slots in the side skirts. We used a stamp ink pad to transfer ink onto the clip slots, lined the skirt up, and gave it some solid taps to transfer the ink over to the car. We then marked the spot where we wanted to drill. I don't remember the drill bit size, but just make sure the barbs on the clips will lock into the hole. Drill, paint, and then put the skirt on. Get underneath and drill your holes for the bottom, paint, and put in your screws. We also put one screw into the front of each skirt.
https://sl-i.net/FORUM/images/imported/2013/05/DSC_0004_zpsef39d283-1.jpg

[phi11]

we should be able to find the oem equivalent,
like the oem front grille clips.

[98legwag]

Wow. I looked at your MR1 thread Thom and missed that....