xoSubieLegacyxo's 96 BK "Charlotte" Rust in Peace :(

[xoSubieLegacyxo]

It's only been 6 months since I traded my old Legacy in for my WRX, but there was something missing. I randomly search craigslist and found a guy selling a white wagon for $500. I didn't really read the description, and I just emailed him and said I'll take it. I think I scored on a sweet new city car. She has 261,000 miles on the original engine. Previous owner said he changed the timing belt and head gaskets. Also comes with some mods and replacement parts. Overall I think she was a major score, and will be a nice little car to run to work, and finally collect parts in.

Mods:
Engine
Hybrid Intake
eBay UEL Headers
3" Header-back Exhaust (soon to go away)

Exterior:
WRX struts and springs

Interior:
WRX CD player
Subaru Rubber trunk floor cover

NOW FOR SOME PICTURES!

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/936384_10151490610517476_975167187_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/1006162_10151490612942476_1643867803_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/970859_10151490612592476_2024146393_n.jpg

this car is already a champion at hill climbs! lol
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/600298_10151490612467476_1449662622_n.jpg

[1996Battlewagon]

Wait, so it already has installed UEL headers and an 3" exhaust? If so, why is the piping so big for a 2.2? I call silliness.

Kickbutt car by the way. Inb4 Stacie gives up her guts for Charlotte. :wink: :twisted:

[Dead91silvia]

Chad... That rust hurts my eyes... LOL...

Sounds like you got a decent buy though!

[Zangado1]

$500 is a great deal. You cant find a running,driving Subie wagon here in Pa. for under $1500 in my searching for parts lately. Keep us posted.

[xoSubieLegacyxo]

Wait, so it already has installed UEL headers and an 3" exhaust? If so, why is the piping so big for a 2.2? I call silliness.

Kickbutt car by the way. Inb4 Stacie gives up her guts for Charlotte. :wink: :twisted:

Chad... That rust hurts my eyes... LOL...

Sounds like you got a decent buy though!

$500 is a great deal. You cant find a running,driving Subie wagon here in Pa. for under $1500 in my searching for parts lately. Keep us posted.

Thanks guys. The first thing to be removed is the exhaust. I'm going to try and get at least one 02 sensor, and get a high flow cat. The piping will decrease to a 2 & 1/4" from the header back, and I'm thinking about using a muffler I got from a swap meet. Then she'll sound a lot better. Once the car runs, and is inspected I'll slowly start on the rust. Robin you have no idea how bad that one quarter panel and dog leg section is.The only thing in the jam is tape painted white. I'm going to replace the right quarter, potentially all 4 doors, and swap my outback hood on for a cleaner look. Pretty much it so far.

[nikolaus.conrad]

Is the new car an L or a Brighton? Can't tell lol

[xoSubieLegacyxo]

Is the new car an L or a Brighton? Can't tell lol

I think its an L

[nikolaus.conrad]

If it has disc brakes, electric windows, and a tach it's an L. Drums, roll ups, and no tach it's probably a Brighton.

[Muse]

My L is a 95 and it has drums out back...

[xoSubieLegacyxo]

If it has disc brakes, electric windows, and a tach it's an L. Drums, roll ups, and no tach it's probably a Brighton.

Mine has a tach, but no electric windows. so it's in the middle here. lol

[fireman2101]

I'm pretty sure the tach was swapped in by the last owner. At least that's what he told me when I looked at it. Lol

[xoSubieLegacyxo]

I've been confirmed by my insurance that it is a Brighton.

[USDM96SLI]

this looks like the same car....

viewtopic.php?f=26&t=27356 (https://sl-i.net/FORUM/viewtopic.php?f=26&t=27356)

[xoSubieLegacyxo]

this looks like the same car....

viewtopic.php?f=26&t=27356 (https://sl-i.net/FORUM/viewtopic.php?f=26&t=27356)

It certainly is! haha

[xoSubieLegacyxo]

Drove the wagon to work today to show my boss. My dad called and asked why my WRX was sitting out front of my house this morning, so I had to show him my car too. He had a lot of negative remarks about how I waste my money, but then he said it would make a good car to go to work and back.

[USDM96SLI]

A sub $1000 legacy are one of the cars you can never go wrong with. Super easy cars to work on too. Hail 2.2L ! Haha

[GTDrifter]

$500 is a great deal. You cant find a running,driving Subie wagon here in Pa. for under $1500 in my searching for parts lately. Keep us posted.
You don't look hard enough lol

Just think chad, your outback hood was white at one time. If you don't wanna paint it I could tell you of a junkyard you could get a white one at.

[xoSubieLegacyxo]

$500 is a great deal. You cant find a running,driving Subie wagon here in Pa. for under $1500 in my searching for parts lately. Keep us posted.
You don't look hard enough lol

Just think chad, your outback hood was white at one time. If you don't wanna paint it I could tell you of a junkyard you could get a white one at.

haha I know right? I'll just paint it black with either plasti dip or rattle can.

I got a free WRX stereo to put into the car. Hope the speakers work! lol

[Rust2Runner]

Betcha the bottom of yours looks like my avatar ;)

[xoSubieLegacyxo]

Betcha the bottom of yours looks like my avatar ;)

I'm not sure. Ill have to find out. Haha

Drove the car to work today. Hopefully I'm going to remove the interior and give it a complete clean out. Might spray the engine bay down with simple green to wash it off as well.

[xoSubieLegacyxo]

This weekend I cleaned out the wagon. vacuumed the interior so it would stop smelling like cigarettes, and then washed down the engine bay. Today I took apart the stereo and center vent trim for a free mod. A little spray bomb and it looks completely different. Just need the connector that plugs to the back of a stock WRX cd player. Also did another free mod and used the wires and terminal ends to make a small grounding kit. I went from the pass strut tower to the coil pack, and from the coil pack to the negative battery terminal. Next weekend I might look into getting new seats from a local yard, and wire in the new stereo.

https://sl-i.net/FORUM/images/imported/2013/06/null_zps9549685ajpgt1371402123-1.jpg

https://sl-i.net/FORUM/images/imported/2013/06/null_zps843f29d7jpgt1371402227-1.jpg

https://sl-i.net/FORUM/images/imported/2013/06/null_zpse446ecf7jpgt1371402232-1.jpg

[Rust2Runner]

Looks 10x better! (and dont forget to grab a cig lighter while you're at the yard)

[xoSubieLegacyxo]

Looks 10x better! (and dont forget to grab a cig lighter while you're at the yard)

I have a 12V outlet coming from DeadSilvia! Lol

[xoSubieLegacyxo]

a package from the west coast arrived. Thanks DeadSilvia for all the parts! Now if Nick can get me that new gauge cluster I would be set! lol

[nikolaus.conrad]

a package from the west coast arrived. Thanks DeadSilvia for all the parts! Now if Nick can get me that new gauge cluster I would be set! lol
About tree fiddy :smt023

[xoSubieLegacyxo]

a package from the west coast arrived. Thanks DeadSilvia for all the parts! Now if Nick can get me that new gauge cluster I would be set! lol
About tree fiddy :smt023

How about two fiddy?

[nikolaus.conrad]

a package from the west coast arrived. Thanks DeadSilvia for all the parts! Now if Nick can get me that new gauge cluster I would be set! lol
About tree fiddy :smt023

How about two fiddy?
Two fiddy and a place to crash when I visit and its a deal!

[Dead91silvia]

a package from the west coast arrived. Thanks DeadSilvia for all the parts! Now if Nick can get me that new gauge cluster I would be set! lol

I was wondering if that had came yet... haha...

You know, I have a cluster for sale also... :smt005

[xoSubieLegacyxo]

a package from the west coast arrived. Thanks DeadSilvia for all the parts! Now if Nick can get me that new gauge cluster I would be set! lol

I was wondering if that had came yet... haha...

You know, I have a cluster for sale also... :smt005

haha well I already have one waiting for me.

[Yamazaki]

I finally got to see this car. Pictures don't do it justice..... it worse! :smt005

[Dead91silvia]

^ HAHA!

[xoSubieLegacyxo]

I finally got to see this car. Pictures don't do it justice..... it worse! :smt005

But it's not as bad as Nick's previous outback.

[Yamazaki]

I'm just teasing. I'm actually anxious to see your skills. If you restore that car, you may take the top spot of "autobody master" from Robin!

[xoSubieLegacyxo]

I'll try and render a photoshopped image here soon.

[amgarrety]

I've seen Chad's work, and it's really good, but until he cuts a car in half and welds it back together to the point that you can't tell that the car was ever more than one piece, Robin still has my top spot haha

That being said, I'm going to watch this build closely.

[Dead91silvia]

I'm just teasing. I'm actually anxious to see your skills. If you restore that car, you may take the top spot of "autobody master" from Robin!

thats not that hard to do, really. :smt005


I've seen Chad's work, and it's really good, but until he cuts a car in half and welds it back together to the point that you can't tell that the car was ever more than one piece, Robin still has my top spot haha

That being said, I'm going to watch this build closely.

I'm flattered... I'm really not THAT good, but I am a little crazy. :grin:


Chad, I have some doors that are in good shape (0% rust) if you need them. I'm about to scrap them out, so they would be super cheap, just shipping would be the real cost.

[xoSubieLegacyxo]

I'm just teasing. I'm actually anxious to see your skills. If you restore that car, you may take the top spot of "autobody master" from Robin!

thats not that hard to do, really. :smt005


I've seen Chad's work, and it's really good, but until he cuts a car in half and welds it back together to the point that you can't tell that the car was ever more than one piece, Robin still has my top spot haha

That being said, I'm going to watch this build closely.

I'm flattered... I'm really not THAT good, but I am a little crazy. :grin:


Chad, I have some doors that are in good shape (0% rust) if you need them. I'm about to scrap them out, so they would be super cheap, just shipping would be the real cost.

figure out what would be the cheapest way of getting them to me, and let me know a price! I need all 4 doors haha

[nikolaus.conrad]

I finally got to see this car. Pictures don't do it justice..... it worse! :smt005

But it's not as bad as Nick's previous outback.
Aww come on lol

[xoSubieLegacyxo]

Just finished replacing a wheel bearing in my WRX, so the Legacy is getting set aside so it can be fixed, and soon get state inspected. For this to occur I need to replace the entire exhaust, purchase 2 new 02 Sensors, find a cat, and try to locate a tech who is blind so they will not see the rust spots. Wish me luck! lol

[nikolaus.conrad]

Just finished replacing a wheel bearing in my WRX, so the Legacy is getting set aside so it can be fixed, and soon get state inspected. For this to occur I need to replace the entire exhaust, purchase 2 new 02 Sensors, find a cat, and try to locate a tech who is blind so they will not see the rust spots. Wish me luck! lol
Bondo and spray paint. Then circle the spots where you did that and tackle it later LOL

[Dead91silvia]

I can ship you door shells... I have a driver door that ags18 was going to use, but he got doors in the right color. Do you want me to look into shipping them? They have a few dings, but thats it.

[Muse]

I just realized we're both rockin' the same grille. Such a simple mod, yet it looks so good.

[xoSubieLegacyxo]

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/1005621_10151530412332476_334323300_n.jpg

Much thanks to nickolous.conrad for the new gauge cluster. He even added the correct mileage, AND it came with half a tank of gas! lol

[nikolaus.conrad]

No problem man :smt023 I hope it works well for you!

[wentz912]

I have a second gen exhaust that was cut right in front of the resonator, and just upstream of the axle back flange, zero rust, if it does you any good.

[xoSubieLegacyxo]

I have a second gen exhaust that was cut right in front of the resonator, and just upstream of the axle back flange, zero rust, if it does you any good.

That might be helpful. Wish you were closer so shipping won't be terrible.

[wentz912]

Well if you're interested you can have it for the price of shipping. I just don't need it.

[xoSubieLegacyxo]

Well if you're interested you can have it for the price of shipping. I just don't need it.

see how much it would cost to 17331.

[xoSubieLegacyxo]

Soooo I never posted up pictures of the hood swap. I dug out my old Outback hood from Lucy, and decided to try and paint match using white plasti dip. It's a little off, but it's better then red! The sad part is that the original hood color was white.

https://sl-i.net/FORUM/images/imported/2013/07/null_zpse2425e65-1.jpg (http://s1171.photobucket.com/user/Chad_Zepp/media/null_zpse2425e65.jpg.html)

I also got carried away with the plasti dip and painted my roof black.

https://sl-i.net/FORUM/images/imported/2013/07/null_zpsf128440d-1.jpg (http://s1171.photobucket.com/user/Chad_Zepp/media/null_zpsf128440d.jpg.html)

Much better!

[Muse]

Get them wiper arms back in black! That said, the hood looks great...

[xoSubieLegacyxo]

Get them wiper arms back in black! That said, the hood looks great...

yea I need new blades too. The hood is a little streaky, but works for now.

My boss went to a local yard, and found a lot of outbacks that have good quarters. After my family moves into our new house I might try to get some quarters, doors, and bumpers off of them.

[chrish8r]

The white plastidip looks very good from the picture.

[xoSubieLegacyxo]

Haven't driven the car since the beginning of the month. I need to find a cheap exhaust and replace the front brakes. Then she'll be ready to get inspected.

[xoSubieLegacyxo]

Picked up some goodies tonight at the local subaru meet. Purchased an exhaust for the wagon (cats, 02 Sensors, and a custom mid pipe to use any 3" axleback). I'll use my stock WRX axle back for the moment. Also picked up some Forester struts and springs to lift the wagon. Operation Outback Brighton is a GO! lol

[xoSubieLegacyxo]

Went to pick up some new wheels for the wagon from a buddy, and then stopped by the junk yard to see there inventory. Picked up a rear deck cover, Spare tire tool tray, and the wiring to make my WRX headunit work. Now I just need the wiring diagram.

https://sphotos-a-atl.xx.fbcdn.net/hphotos-prn2/p480x480/969552_10151577162867476_1680340480_n.jpg

[Muse]

Nice wheels... I gotta get some for Ivan, but, alas... I have no money.

[xoSubieLegacyxo]

Nice wheels... I gotta get some for Ivan, but, alas... I have no money.

I hear you. Worst part is when you have two vehicles to mad and no money :(

[Zangado1]

Nice wheels........The Plasti-Dip is working too.

[xoSubieLegacyxo]

Nice wheels........The Plasti-Dip is working too.

Thanks Zang!

Currently while my family is moving, my wagon has become a "parts storage" so I don't lose precious items. I wanted to install my new tool tray and rear cover. So I had to take everything out and put it back in. Then I also went through some old boxes from parts from the first car, and then put them in the wagon. Trying not to look like a hoarder! lol

https://sl-i.net/FORUM/images/imported/2013/07/null_zps97071842-1.jpg

https://sl-i.net/FORUM/images/imported/2013/07/null_zps010b2c13-1.jpg

[nikolaus.conrad]

My Legacy has become a storage bin full of little stuff in the trunk, gotta love the cargo cover for sure :smt023

[chrish8r]

I need to find one of those cargo covers! I have one in my garage but it is from my parents previous legacy and doesnt fit my car....

[98legwag]

I need to find one of those cargo covers! I have one in my garage but it is from my parents previous legacy and doesnt fit my car....

I see them all the time at pick and pulls. If you get a chance go to Crazy Rays in Mt Airy. You should be able to find one there.

[chrish8r]

I havent found any in the ones by me but if i get a chance, ill check out the ones down there. Thank you

[xoSubieLegacyxo]

I havent found any in the ones by me but if i get a chance, ill check out the ones down there. Thank you

My friend Joe has one he was trying to give to me. If you want it I can let him know.

[chrish8r]

I would be interested in that.

[xoSubieLegacyxo]

So I've been busy the past few days with moving into our new house. Finally got the internet working, and I have a small update on the wagon. Picked up a set of new wheels and tires. They look like stock WRX wheels, but are aftermarket. They have a set of Bridgestone blizzak winter tires. A great addition to my off road themed vehicle.

https://sl-i.net/FORUM/images/imported/2013/08/image_1359237252964076_zps9c6c7e5a-1.jpg

[98legwag]

Picture isn't working.

[xoSubieLegacyxo]

Picture isn't working.

Try now! lol

[nikolaus.conrad]

Looks great!! I need to get down there sometime!

[xoSubieLegacyxo]

Looks great!! I need to get down there sometime!

Yes you do! lol

[xoSubieLegacyxo]

Since the WRX is getting a swaybar upgrage I'm going to see if that one is thicker then the legacy swaybar. Might become a free mod! lol

[98legwag]

It should be thicker. But your WRX sedan may have a wider track. The rear should work with some modification to the spare wheel tub or extending the sway bar mounts. Front will be different from turbo to NA but you might be able to make it work. Worst comes to works, Outback sway bars are bigger you can get them dirt cheap at pick and pulls. Cost me $30 for front and rear.

[xoSubieLegacyxo]

It should be thicker. But your WRX sedan may have a wider track. The rear should work with some modification to the spare wheel tub or extending the sway bar mounts. Front will be different from turbo to NA but you might be able to make it work. Worst comes to works, Outback sway bars are bigger you can get them dirt cheap at pick and pulls. Cost me $30 for front and rear.

I only have the rear swaybar that I'm replacing on my WRX. If it doesn't fit I'll keep it if I ever decide to pull off the Whiteline bar. I just thought it would be a free mod to do to the wagon. Maybe while I'm going to get a trailing arm bracket from a Outback I'll get a swaybar too.

[xoSubieLegacyxo]

Since I upgraded the shift knob in the WRX, I had a nice MOMO knob laying around that can be used on the wagon. lol I love these free mods!

https://sl-i.net/FORUM/images/imported/2013/09/4666f18b50d243f3b9b26e2ed3c418c5_zpsf69d-1.jpg

[xoSubieLegacyxo]

Couldn't wait to mount them. Need to wire them up, along with installing the new wheels, tires, struts, exhaust, and center console.

https://sl-i.net/FORUM/images/imported/2013/09/1b4b7d9e33fe4614a25b60487121e399_zpsf892-1.jpg

[nikolaus.conrad]

I just switched from my SUS grill to my old L7 knockoff grill yesterday LOL Looks great!

[xoSubieLegacyxo]

I just switched from my SUS grill to my old L7 knockoff grill yesterday LOL Looks great!

I've always wanted one. I'm not thinking about making my own metal front bumper. Similar to a truck "pushbar" lol

[nikolaus.conrad]

I just switched from my SUS grill to my old L7 knockoff grill yesterday LOL Looks great!

I've always wanted one. I'm not thinking about making my own metal front bumper. Similar to a truck "pushbar" lol
Would you still have the bumper cover on the car or would this 'replace' the whole thing so you have a bumper of steel? Like Superus?

[xoSubieLegacyxo]

[quote="nikolaus.conrad":19gx06hf]I just switched from my SUS grill to my old L7 knockoff grill yesterday LOL Looks great!

I've always wanted one. I'm not thinking about making my own metal front bumper. Similar to a truck "pushbar" lol
Would you still have the bumper cover on the car or would this 'replace' the whole thing so you have a bumper of steel? Like Superus?[/quote:19gx06hf]

Sorry for the late response Nick. Laptop decided to burn up and now my motherboard is fried. There wouldn't be a bumper cover, but the bumper beam would still the there. Thinking of more along the lines of a truck push bar. Let me find a pic and post it up here.

[nikolaus.conrad]

[quote="nikolaus.conrad":169907do]I just switched from my SUS grill to my old L7 knockoff grill yesterday LOL Looks great!

I've always wanted one. I'm not thinking about making my own metal front bumper. Similar to a truck "pushbar" lol
Would you still have the bumper cover on the car or would this 'replace' the whole thing so you have a bumper of steel? Like Superus?

Sorry for the late response Nick. Laptop decided to burn up and now my motherboard is fried. There wouldn't be a bumper cover, but the bumper beam would still the there. Thinking of more along the lines of a truck push bar. Let me find a pic and post it up here.[/quote:169907do]
I'm waiting.......

:grin:

[xoSubieLegacyxo]

Went to the junkyard and picked up a roof rack. Not sure how I'm going to attach it (might just use tapping screws).

[xoSubieLegacyxo]

Finally read the codes that are causing my check engine light to come on. Looks like I need to replace the front 02 sensor. Luckily I have a whole new header-back exhaust laying around. lol

[xoSubieLegacyxo]

Didn't expect to buy parts today. Picked up a front skid plate from Nickoulus.Conrad at the DirtyImpreza meet. He's also looking out to help me find a GT spoiler, and a parking brake handle.

[xoSubieLegacyxo]

The past two days I've been back in the garage wrenching on the wagon. First upgrade was the rear brakes and installing my new forester struts. Had a few bumps in the road, and I'll be ordering additional parts that need replaced. Here's a quick pic of the old drums versus the new ones.

https://scontent-b-iad.xx.fbcdn.net/hphotos-prn2/1376364_10151734394152476_1448673034_n.jpg

[xoSubieLegacyxo]

http://instagram.com/p/fRBnGcpc43/

The wagon has been in the garage without the rear wheels and brakes. Hopefully back on all fours next week!

[xoSubieLegacyxo]

Two week pass, and I finally get time to work on the wagon again. Grinded off the bolt heads to the wheel cylinders. Tap of the hammer and they came off. When I had the hammer in my hand, I was wondering how much filler is in the quarter panel. And this happened....

https://scontent-a-lga.xx.fbcdn.net/hphotos-prn1/q77/s720x720/1380678_10151763391567476_468194562_n.jpg

https://scontent-b-lga.xx.fbcdn.net/hphotos-prn2/q74/s720x720/1382091_10151763391692476_1436596782_n.jpg

It seems the golden arches is involved.

https://scontent-a-lga.xx.fbcdn.net/hphotos-prn2/q71/s720x720/1382308_10151763391642476_928914528_n.jpg

So it looks like I'll need to do a quick repair to pass inspection. Add one more thing to the "To Do" list.

[86bratman]

Looks like they had some dual purpose body filler in there.

[Asphalt Art]

That reminds me of my first car, a 65 Dart GT that had newspaper stuffed behind all the holes to support all the Bondo they used. I hit a pothole with it and lost both lower-rear quarters haha.

[xoSubieLegacyxo]

Well after some long discussions with some family and close friends, I decided to pull the engine out of this car, and scrap the shell. The body is too far gone for me to spend money in restoring it. But the good news is that I'll be on the lookout for another car (Outback with a blown engine).

[xoSubieLegacyxo]

I think I found a candidate for the heart transplant.

http://york.craigslist.org/cto/4116693701.html

[Muse]

Woo! Go for it. that thing looks good.

[xoSubieLegacyxo]

This morning I checked out the potential donor shell. Aside from the bubble rust on the driver quarter panel the car was straight, and very clean for a 200k mile outback. Also bumped the price down a little, soo now I'm trying to sell some un needed parts to make up the cost of this shell. Trying to keep my wagon here until the swap is complete, and then send all the scrap in one load.

As for the teardown of the wagon I disconnected the headlights, grille, air intake, battery, strut brace, fuse box, washer reservoir, and my grounding kit. I'm waiting to pull the engine out until my friend gets his STi block out of his car, so I can use his engine hoist.

https://scontent-b-iad.xx.fbcdn.net/hphotos-prn2/1382334_10151772815657476_1142320204_n.jpg

[xoSubieLegacyxo]

Sold the hood, and my STi BBS rims this morning to Keaton Rechard (he has the RHD postal wagon with screwed on flares). Just need a little more cash and I'll be able to buy the outback!

[xoSubieLegacyxo]

Going this morning to pick up the replacement. Look for a new build thread here shortly.

[Dead91silvia]

Going this morning to pick up the replacement. Look for a new build thread here shortly.

:smt023

[86bratman]

Are you going to keep the rest of the drivetrain out of her after the engine swap to the outback?

[xoSubieLegacyxo]

No I'm keeping it in the wagon to go to the scrap yard, unless someone wants to come pull it out and buy it from me.

[xoSubieLegacyxo]

This past weekend 86Bratman and his buddy drove up to remove and purchase the trans, driveshaft, and rear diff out of the wagon. Also bought from me the 1st gen forester struts, extra cargo mat, and an Outback grille (Bratman was missing an emblem, and he can't roll like that lol). The car is pretty much a shell. I removed the front seats, steering wheel, gauge cluster, stereo, heat/AC controls, and I might take out the rest of the plastic interior pieces. A friend might pick off the fenders for his potential new car, and that should be it for the parts scavenging.

https://sl-i.net/FORUM/images/imported/2013/12/6834B1BB4E8E4F87AB596F72018C17E0_zpsm8pk-1.jpg

https://sl-i.net/FORUM/images/imported/2013/12/839E69B19FC24DC0B4CE5F61109663BA_zpsraik-1.jpg

https://sl-i.net/FORUM/images/imported/2013/12/6FE0A87928A54D7E9507C73BAAC40C0B_zpssxuc-1.jpg

https://sl-i.net/FORUM/images/imported/2013/12/55D55C716B5F485A8B96BAD76E1377BC_zpsxdxd-1.jpg

Once I get a free saturday morning I'll put some wheels on the car and send it to the scrap yard to be turned into a food blender.

[xoSubieLegacyxo]

Finally able to take the car to the scrap yard (and a washer and dryer for my boss). Hope she is turned into something cooler then a fridge or hyundai.

https://sl-i.net/FORUM/

[Muse]

*hugs a manly hug*
Yeah, I know the feeling. I just sent my first Leggy to the scrapyard on Friday.