Need help wheel bearing part number

[moneymaker9210]

I have a 96 legacy gtb twin turbo and need to find the part number for the rear right wheel bearing as its gone, would a outback wheel bearing work from same year?

[couchfuzzy]

check out http://opposedforces.com/parts/, best subaru part # finder out there

[Wiscon_Mark]

As long as it's the same knuckle type (drum vs. disk) it should be the same. Heck, the Imprezas should be the same, too, but use opposed forces like couchfuzzy suggests, I use that site all the time when ordering parts.

[jjay03]

It should be the same a lot of the subarus use the same wheel bearing. Dealer usually has them and the seals in stock. Do yourself a favor and get a new hub also.

[Wiscon_Mark]

I wouldn't waste money with a new hub, they almost never need replacing unless there's something visibly damaged. You could buy a hub, get in there, take a look and return the hub if you don't need it.

One thing I would recommend is replacing the bearings in pairs (do the left & right at the same time on either front or back).

[jjay03]

Ive had a bent hub and had to replace the bearing twice. Local subaru shop always replaces the hub also.