blankdeluxe
03-17-2014, 07:53 PM
So I turboed my ej22 to start this off running a vf11 at wastegate pressure. I ran on the stock ecu with no tune or changes in any way from stock aside from the turbo itself. I never took the car above 4k after I boosted it and it ran great for about a month before the headgasket finally went. Decided this was a great time to swap in my 22t that I had sitting around so I started the parts collecting process. I have the 22t almost together now and will be getting dropped in the car in two weeks from today. I'm running my 97 intake manifold on the 22t block and heads so that my 97 ecu will run it. I picked up a emanage blue for a good deal on craigslist while I was collecting parts so I figured this would be a good time to wire it in. Problem is I can't find any wiring details for this thing for the life of me, almost like emanage and Subaru were never meant to be. I have the greddy user manual and the fsm for my car and made a full ecu pin out for my car today at work. I'm still fuzzy on the greddy side of things and how to properly wire up my MAF and injectors to do some tuning. Anyone have any experience with the 2.2 ecu and this thing?