4U2Envy's 2007 Legacy Spec-B

[4U2Envy]

Hey SL-I.

I picked this little beauty up about a month and a half ago, the price was right and the mileage was low at 104,500kms(64,900miles) so I couldn't pass it up. I've always been a fan of the Legacy and also have a white BD that I've owned for the last 11 years which was boosted and had meth injection(have a journal on here).The previous owner babied this car and the only performance mods he did were a stage1 flash, Invidia catback and a COBB BPV. It didn't take long before I started ordering parts:D I'm satisfied with the power and how the car handles for now, I'll be switching my focus and adding some cosmetic parts to the exterior and engine bay. Stay tuned for updates:ritz:

Sorry for the crappy pics, I'll have better ones up soon!

https://sl-i.net/FORUM/images/imported/2014/09/front1600_zps844c1a24-1.jpg (http://s717.photobucket.com/user/subydude1983/media/front1600_zps844c1a24.jpg.html)

https://sl-i.net/FORUM/images/imported/2014/09/back1600_zps220f6fd5-1.jpg (http://s717.photobucket.com/user/subydude1983/media/back1600_zps220f6fd5.jpg.html)

https://sl-i.net/FORUM/images/imported/2014/09/specb_zps9473f92d-1.jpg (http://s717.photobucket.com/user/subydude1983/media/specb_zps9473f92d.jpg.html)

https://sl-i.net/FORUM/images/imported/2014/09/groupshot_zps6b510e02-1.jpg (http://s717.photobucket.com/user/subydude1983/media/groupshot_zps6b510e02.jpg.html)

https://sl-i.net/FORUM/images/imported/2014/09/specb2_zps44f39e66-1.jpg (http://s717.photobucket.com/user/subydude1983/media/specb2_zps44f39e66.jpg.html)

https://sl-i.net/FORUM/images/imported/2014/09/photo1_zpsf54a3eb6-1.jpg (http://s717.photobucket.com/user/subydude1983/media/photo1_zpsf54a3eb6.jpg.html)

Engine:
• COBB LWCP
• Cryotune Stage 2 E-Tune
• Prodrive Battery Tie Down
• Prodrive Oil Cap
• COBB AccessPort V2


Intake/Exhaust/Fuel:
• GrimmSpeed Downpipe
• Invidia Q300 CatBack Exhaust
• COBB BPV
• PTP Turbo Blanket

Drivetrain/Transmission:
• Kartboy Short Shifter
• Kartboy Front Shifter Bushings
• Group N Tranny Mount
• Group N Pitch Stop Mount
• Whiteline Gearbox Positive Shift Kit

Suspension/Wheels:
• Whiteline 20mm Rear Sway Bar
• Powerslot Rotors Front/Rear
• Stoptech Pads Front/Rear
• Goodridge Stainless Steel Break Lines Front/Rear

Interior/Electronics:
• Innovate Motorsports LC-1
• Innovate Motorsports MTX-D Boost Gauge

Exterior:
• Rally Armor mud flaps

Future plans:
• R-Rev CF Grille
• R-Rev Front Lip
• JDM Battery & Power Steering Covers
• Whiteline 22mm Front Sway Bar
• Whiteline Endlinks Front/Rear
• AVO/Perrin/Grimmspeed TMIC

[98legwag]

Looking great. One thing I would suggest is reinforcement brackets for the rear sway bar mounts. They are a weak point on the 4th gen. I have the AVO brackets on my car.

[thenines']

If you want an extra rim for your ausome car-let me know-I just want to get rid of it :smile:

[4U2Envy]

Looking great. One thing I would suggest is reinforcement brackets for the rear sway bar mounts. They are a weak point on the 4th gen. I have the AVO brackets on my car.

Thanks for the tip, I been looking into those. Where did you pick yours up from? I couldn't believe how weak the factory mounts looked when I removed them!!

[98legwag]

Looking great. One thing I would suggest is reinforcement brackets for the rear sway bar mounts. They are a weak point on the 4th gen. I have the AVO brackets on my car.

Thanks for the tip, I been looking into those. Where did you pick yours up from? I couldn't believe how weak the factory mounts looked when I removed them!!
I picked mine up straight from AVO.
http://www.avoturboworld.com/avoshop/re ... eg312o1nj0 (http://www.avoturboworld.com/avoshop/rear-stabilizer-mount-brace-p-115.html?osCsid=252j8g5ubilo8bd4eg312o1nj0)