PDA

View Full Version : 3rd Generation Wagon (BH) Krypton's 01 Twin Turbo Outback



krypton
03-29-2015, 11:14 PM
Very short story got this car 3-4 years ago stock. I lasted till about 350,000km About(217,000Miles) Ended up busting out 4th so with it tired motor and a blown box bought a half cut.
Pulled out the old motor painted the engine bay and slapped in a new one.

As for mods, I'm waiting on stuff i have ordered to start coming in, new grills, sway bar's, brakes, wheels so forth.
292
293
294
OUTSIDE LOOKS
Eye lids (On there way from japan)
Zerosports black carbon fiber grill (On there way from japan)
Sti spoiler (On there way from japan)
XV rims (undecided not sure if they would fit over 4 pots)
Respray Metallic orange over Black
New garnish (one i have is cracked)
Monsoon's
Driving lights -Hella or Light Force havn't looked into sizes yet
Custom Plate's (Ordered) If you are bothering reading this the plates i have gotten are SOSICK

SUSPENSION AND HANDLING
Bilstien shocks
Sti springs
Camber adjustment top mounts
Zerosports 21mm rear sway bar (On there way from japan)
Front sway bar
Sti strut brace (On there way from japan)
Looking into more bracing

BRAKES
4/2 Pot combo
I know the Liberty 06 GT's would be better but as im not an expert on these things i think i'm better off staying with something that i can get info and parts for easily.
Ns400 Brake pads
DBA T3 4000 Rotors
Braided lines
Beatrush booster bracket (Will be one of the last things. If i dont think i need it i wont bother)
5.1 Brake fluid

STEREO
Current
Alpine UTE-42EBT Head unit
Stock Fronts
Rockford Fosgate 6inch Rears
Rockford Fosgate 3001 amp
Kenwood cheap as hell 12inch Sub in homemade box

Future
Alpine UTE-42EBT Head unit
Focal 6.5" Flax 3 way PS165F3 Fronts
Focal 6.5" Flax 2 way PS165FX Rears
Rockford Fosgate P600X4 Amp for Speakers
Rockford Fosgate 10"Slim Sub T1S210
Rockford Fosgate P1000X2 Amp for Subs
(Yea im a bit of a sound nut)

INTERIOR
Blackout cluster
02 Wrx Seats
Brushed metal look surround
Sti pedals
Gfb short shifter
Ridiculous over sized 12" JDM dildo bubble gear nob
LED interior lighting
Full black interior
Sunroof?
Center console with a cup holder (Still have the slot where the Low range was)
​Fire extinguisher

GAUGES
Defi Racer Boost
Defi Racer Oil pressure
AEM A/F Ratio
Prosports Intercooler temp in/out
^^^These will be in a custom dash mount (move alot keep passengers occupied)
Defi Racer Oil temp
Defi Racer Water temp
^^^These will go in a pillar, might have to be custom as well as i dont think you can get them (easier to see and more impotent for track days)

ENGINE BAY
Sti brace
Green vacuum hoses
Paint intake red
Zerosports radiator cooler
Zerosports air intake
CAI (Heard the Process West MY01-MY07 would fit a BH???)
D1 Spec oil catch can (On its way)
Beatrush belt cover
Blitz FMIC pipeing
Some bigger injectors (Haven't looked into it yet on what cc i should get) Along with fuel pump so forth
Manifold spacers (again haven't looked into it is 8-9mm to high?)
Earthing kit
New heater hoses
Better radiator
Braided fuel lines
Bolt dress up kit
GFB in car adjustable BOV
Bonnet gas struts
Can you get or fit any of the silicon air intake on that go under the manifold?
Clear timing belt covers (Witch i found have now been made as of Nov last year, ill put a link if anybody wants to have a look)

EXHAUST
Zerosports manifold
Custom dumps (2 1/2 off primer y 3 off secondary)
3inch single muffler 200 cell cat
Keep the tip i have on

After having a look at what i want with it all written down i think this might be a long project haha
If you got to here congrats there is a bit there. Looking forward to hearing your thoughts

nepbug
03-30-2015, 10:54 AM
Nice, I've always liked the twin turbos. So if IIRC the TT engines were EJ20s and your outback has the 2.5 badge on it, so this was swapped correct? What is the engine history? What part of the world do you hail from?

rkrenicki
03-30-2015, 10:58 AM
He has plates on his car from Victoria Australia, so I would guess that is where he is. ;) In his introduction thread, he noted that he had swapped in the EJ206/208 (it does not say which).

krypton
03-31-2015, 01:29 AM
Sorry was just trying to keep it simple. I come from Victoria in Australia yes.

The outback started as a 2.5 N/A as we only got the TT in B4 so forth. I bought the motor from Ichibhan (Or if you watch Mighty car mods, Mechanical stig) Its a 2003 208 Gen 3 E-tune half cut that was imported from japan. 180,000km on it (About 110,000ml) a few i know but it did come with 4.44 dif that i needed to run with the new box. Plus Sti pedals, Momo wheel, Brushed steel dash, Blackout cluster and bilsteins.

The swap was done about 3 day's before Christmas, i haven't been able to do any mods of late until my hand heals from a motorbike accident i had a few weeks ago, so till then its just getting parts ready and researching.
299
296
297
298