SL-i Limited Edition FX-R 3.0 JDM Retrofit Brackets

[Hinyo]

SL-i Limited Edition Retrofit Brackets

Original Hand Made Models

A big thanks to a good friend Andy!!!!

Also a big thanks to 98OBW and his Company Fairbank Scales for all their help!!!!

Couldn't make this happen without you guys!!!

https://sl-i.net/FORUM/images/imported/2015/02/20150205_211657_zps5d178a34-1.jpg

https://sl-i.net/FORUM/images/imported/2015/02/10446302_10205976231795095_4361460662942-1.jpg

Final Cad Design

301


Iterations

302



Specs:

- Water Jetted Aluminum/Steel
- Etched Sl-i Logo
- CAD Designed


Fitment*:

- Made to fit 2nd Gen JDM legacy Projectors (USDM 2 piece to come if interest is there)

303

https://sl-i.net/FORUM/images/imported/2015/03/20150325_232652_zpsxe19m9n5-1.jpg

BOTTOM CORNER OF FX-R WILL REQUIRE MINOR TRIMMING

https://sl-i.net/FORUM/images/imported/2015/03/20150325_002256_zpsvxhqqocr-1.jpg


Price / Payment:

$30 Aluminum Sl-i Logo Etched
$25 Aliminum Non Etched
$20 Stainless Steel (Need to find new supplier - Temporarily out of stock)!!!!


Shipped to anywhere in the continental US
Other locations please PM for additional pricing

Payments will be sent to PayPal: natecar101@yahoo.com

PLEASE GIFT PAYMENTS!!!!

Group Buy Guidelines:

Need to have 17-20(sorry for the weird number its just how many I need!) Orders placed and paid for before I can sustainability order a production run!
Once all orders are placed and paid for will ship all items out at once!

You may order more than one but please specify material

ONLY ALUMINUM WILL BE AVAILABLE FOR ETCHING with the SL-I logo
STEEL SETS MAY NEED PAINTING but will be bead blasted but will take longer to get

Models Available

Initial Prototypes

https://sl-i.net/FORUM/images/imported/2015/03/20150329_193728_zpsaksjjw0f-1.jpg


To Order: (Please Copy and Paste the following to fill out)

Username:

Material:

Etched or Non Etched:

NOTE: Please do not fill out a request if you do not wish to purchase a Bracket. This is for serious inquires only!

Current Orders:

1. WPEC / Aluminum / Etched / Shipped
2. WPEC / Aluminum / Etched / Shipped
3. Thomistopheles / Aluminum / Etched / Shipped
4. 86bratman / Aluminum / Non-Etched / Shipped
5. phi11 / Aluminum / Etched / Shipped
6. malcolmxtucker / Aluminum / Etched / Shipped
7. ItsPrimetime / Steel / Non-Etched / Shipped
8. Specv118 / Aluminum / Etched / Shipped
9. HoboJoe / Aluminum /Etched / Shipped
10. bow tie shy guy / Aluminum / Etched / Shipped
11. Kevin Previe (outside forum order) / Aluminum / Etched / Awaiting Payment
12. sybir / Aluminum / non - Etched / Shipped
13. Zachary Pena (outside forum order) / Aluminum / Etched / Awaiting Payment
14. James Rayson (outside forum order) / Aluminum / Etched / Shipped
15. Brian Rees (outside forum order) / Aluminum / Etched / Awaiting Payment
16. Brendan Okey (outside forum order) / Aluminum / Etched / Shipped
17. Adam Crismale (outside forum order) / Aluminum / Etched / Awaiting Payment
GOAL!!!! (Just need payments)
18. Robert Lee (outside forum order) / Aluminum / Etched / Shipped
19. Alphius / Aluminum / Non-Etched / Shipped
20. BDAlex95 / Aluminum / Etched / Shipped
21. Oakieru / Aluminum / Non - Etched / Shipped
22. chevyman1968/ Aluminum / Etched / Shipped
23. 98Outbackdream/ Aluminum / Etched / Shipped
24. CrazyIvan/ Aluminum / Etched / Shipped
25. twistedsymphony / Aluminum / Etched / Shipped
26. Michelle/ Aluminum / Non-Etched / Shipped
27. DaveM / Aluminum / Non-Etched / Shipped
28. Leonel Montes(still need forum name) / Aluminum / Non-Etched / Shipped
29. Blkwagon / Aluminum / Non-Etched / Shipped
30. 98LegacyGTwagon / Aluminum / Etched / Shipped
31.
32.
33.
34

MANUFACTURED & SHIPPED

Still need parts for your retrofit?

Contact Reason on the forum or visit http://www.4zero1motorsports.com/ and contact them directly for discounted morimoto parts!!!!

Happy Retrofitting!!!

Statement: I back my products 100%, if for any reason you are not completely satisfied with your purchase contact me and I will do my best to resolve any questions or issues

[Alphius]

I'm in for a non-etched set. No plans to change my LHD converted JDM projectors out yet but I'd rather have the option to do so than not. Do these make the FX-R projector a bolt-in retrofit aside from the small bit of trimming?

Username: Alphius

Material: Aluminum

Etched or Non Etched: Non-Etched

[BDAlex95]

Username: BDAlex95

Material: Aluminium

Etched or Non Etched: Etched

Did you want us to PM you this info or can I just post here?

[sybir]

Username:sybir

Material:Aluminum

Etched or Non Etched:Non etched.

LMK, can paypal whenever.

[Thomistopheles]

I'm in for a non-etched set. No plans to change my LHD converted JDM projectors out yet but I'd rather have the option to do so than not. Do these make the FX-R projector a bolt-in retrofit aside from the small bit of trimming?

Username: Alphius

Material: Aluminum

Etched or Non Etched: Non-Etched

You will need to adjust the rotation, mark the mounting holes, drill, and bolt on the projector. This way projector rotation is set on your car, with your lights. Set them exactly where they need to be.

I'm veeeery excited about these, having a prefab bracket will greatly reduce downtime for my retrofit.

[bow tie shy guy]

Username: bow tie shy guy

Material: Aluminum

Etched or non etched: Etched


Please and thank you 😊 I will PayPal you money this Friday. Came out good man!

[86bratman]

I'm curious on the etching, will it be visible with the light surround in place?

Nevermind, found the answer to that on facebook lol.

Will send you my payment on Friday.

[Hinyo]

Sooner you paypal sooner order goes out. Please gift payments so I can send more back to the forum.

[Hinyo]

I got 3 more payments but only sure about who two of them are from could you please pm me your sli name after you send a payment? Please and thank you lol

[Hinyo]

hey guys so... something came up.... Will have to keep everyone's money and send no brackets.

Thanks

#sorrynotsorry

(P.S. check the date)

[Hinyo]

And if I was still sending out brackets here's what the etched ones might look like

304

[BDAlex95]

Have you checked if the etching will be covered by the light? From the looks of your pictures it looks like the projector will cover up the etching, at least half of it.

[Hinyo]

To be honest. It will be covered slightly by the projector than completely by the shroud. The idea for the etching is for exclusivity and to send more money back to the forum. Not all mods on cars are shown all the time some are branded but still hidden =)

[BDAlex95]

Oh, I was just wondering. Wanted to cut it out and put a little LED strip behind it to light up the SL-I logo, or paint it so it's visible.

[Hinyo]

Oh, I was just wondering. Wanted to cut it out and put a little LED strip behind it to light up the SL-I logo, or paint it so it's visible.

if you want yours to be cutout instead of etched that can be arranged. no additional cost. just when putting your headlight back together be aware that putting the shroud back in place will cover the bracket. LMK!!!

[BDAlex95]

No it's okay, if it's covered there's no point. Always happy to donate to the forum though!

[98OBW]

Oh, I was just wondering. Wanted to cut it out and put a little LED strip behind it to light up the SL-I logo, or paint it so it's visible.

I might be able to do something for you. If you can figure out the size you need it to be (say cut out of a 1" x 1" piece of aluminum or stainless) I can see if I can get it cut when we do a run of the brackets.

[BDAlex95]

I might be able to do something for you. If you can figure out the size you need it to be (say cut out of a 1" x 1" piece of aluminum or stainless) I can see if I can get it cut when we do a run of the brackets.

Thanks, but I don't need it cut out if it gets covered up by the projector and shroud when completely installed. Maybe offer that as an option? Non-Etched/Etched/Cut-out?
Unless I'm not understanding you right?


if you want yours to be cutout instead of etched that can be arranged. no additional cost. just when putting your headlight back together be aware that putting the shroud back in place will cover the bracket. LMK!!!

[Oakieru]

Username: Oakieru

Material: Aluminium

Etched or Non Etched: Non Etched

Not sure if we're just posting our info here, but I'll pm you just in case.

[Hinyo]

Username: Oakieru

Material: Aluminium

Etched or Non Etched: Non Etched

Not sure if we're just posting our info here, but I'll pm you just in case.

Got it. Dont forget to send payment

[HoboJoe]

Payment has been sent sir. I may pick up an additional 2 in the next few weeks.

[Hinyo]

Thanks HoboJoe I should have VERY MINIMAL extra inventory once the order has been placed so let me know sooner rather than later.

[98OBW]

Thanks, but I don't need it cut out if it gets covered up by the projector and shroud when completely installed. Maybe offer that as an option? Non-Etched/Etched/Cut-out?
Unless I'm not understanding you right?

I wasn't talking about bracket itself, we can cut something in addition to the bracket during the run.

[platypus]

What about a 3 inch ring for the front of a projector? I dunno that there'd be enough meat to use it, but hey could work?

[phi11]

I'll take spot #5, please!

phieleven

aluminum

Etched

PAYMENT SENT!

[Hinyo]

Got it!!! Thanks!!!! Order will be placed soon!!!!

[Alphius]

So, when I order the FX-R 3.0 kit should I get the 2.5" or 3" ones?
Also wondering if a shroud fits in the light as well or am I better off saving the money and not ordering shrouds?

[Thomistopheles]

So, when I order the FX-R 3.0 kit should I get the 2.5" or 3" ones?
Also wondering if a shroud fits in the light as well or am I better off saving the money and not ordering shrouds?

You will not be using shrouds, the factory bezel in the headlight serves that purpose. Get the 3" lens FX-R, the stock projector has a 3" lens so it will fill out the bezel and look better. I'll be using 2.5" in mine, but only because I have them sitting on my workbench and they didn't cost me anything.

[Alphius]

Thanks Thom, its been a while since I had my projectors apart for the LHD conversion so I had forgotten about the shroud and size.

[Hinyo]

Scheduled for cutting next week hopefully shipping out first week of May. Will be asking for all shipping info soon!!!!

[98OBW]

VIDEOS!!

Brackets being cut: https://www.dropbox.com/s/n9vz96ebrji0bjs/video-1431091922.mp4.mp4?dl=0

Brackets being etched: https://www.dropbox.com/s/yzcxq3sq4fsjt15/2015-05-08%2010.11.39.mov?dl=0




492

[TyrWagon]

Wow, do you have ani pic, with this brackets installed???

[Hinyo]

Wow, do you have ani pic, with this brackets installed???

Picturs on the first page with prototype installed

[Hinyo]

First shipments should go out as soon as tomorrow *fingers crossed*

Hope you guys like them

[Hinyo]

Got a lot ready to be sent out out. Please post pictures as you get them!!!! I'm so tired... guna hit the hay. post office in the AM.

[Hinyo]

Final Fitment

https://sl-i.net/FORUM/images/imported/2015/05/20150515_162849_zpsxhjwky0f-1.jpg

https://sl-i.net/FORUM/images/imported/2015/05/20150515_163206_zpsghvvfxqs-1.jpg

[86bratman]

Looking forward to spending more money on my engineless car lol.

[Hinyo]

motivation to make it not so engine-less =P

[phi11]

Now we need a FX-R group buy!

[Hinyo]

Now we need a FX-R group buy!
phi11 get Reason to set one up =P

[Reason]

Get enough people interested and I will no problem. Or if not, people can just message me for a pair.

[86bratman]

How many people would we need for a group buy on the projectors?

[HoboJoe]

Just opened mine up and great great looking product!!! I cant wait to do the retrofit!!! Thank you again!!!

[twistedsymphony]

I just got mine in... they look great, though I'm a bit confused as to how the projector attaches to the bracket.

[Hinyo]

Hey twistedsymphony please review the diy here

https://sl-i.net/FORUM/showthread.php?18937-DIY-FX-R-3-0-Retrofit-Into-2nd-Gen-Legacy-Liberty-BD-BG-BK-JDM-Headlights

If you have any further questions contact me at my email. Lots of methods exist but the intended method is with bolts. All information listen in the diy lmk!!!!

[Hinyo]

Just opened mine up and great great looking product!!! I cant wait to do the retrofit!!! Thank you again!!!

No problem!!! Glad you like it!!!

[Michelle]

Were enough produced that there are still more left to sell?

[Hinyo]

Michelle just sent you a PM I still have a few of everything remaining. You should have the information shortly.

[DaveM]

Michelle just sent you a PM I still have a few of everything remaining. You should have the information shortly.

I would also like a pm with the info. Lol, Thanks.

[Hinyo]

I would also like a pm with the info. Lol, Thanks.

Got yours shipped out DaveM

[DaveM]

Got yours shipped out DaveM

:thumbup: