Cosmoracing Cold air intake

[warrior]

http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... %3AIT&rd=1 (http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&ih=013&item=230025180778&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1)

Looking to get this.. but my question is, in the picture of the blue subaru.. where's the MAF supposed to be? and also it says "Models NOT equipped with a Air Mass Meter" .. i got a '99 LGT.. :shock:

[Wiscon_Mark]

It's for a MAP sensor. You could modify it to work with a MAF, but it'd take some cutting and a 3" silicone sleeve.

[warrior]

So would you say it would be feasible to get it.. and does a CAI really make all that much of a difference or should I just stick to one of those regular short ram ones?

This one also comes with all 3 vacuum lines already welded onto the intake!!

and and.. what about water? should i be concerned?

[ryankenn]

If you're going to get a "generic" Ebay CAI, don't pay that much for the Cosmo intake. Search for a buyer named Bomb Effect. They had short Rams and CAI in multiple colored piping for under $ 20 and 30 respectively.

Oh, here's a link to the short ram. He's got 10 up from time to time, but the CAI's are harder to find.

http://cgi.ebay.com/ebaymotors/90-97-SU ... QQtcZphoto (http://cgi.ebay.com/ebaymotors/90-97-SUBARU-IMPREZA-2-2-2-5L-NON-TURBO-BL-AIR-INTAKE_W0QQcmdZViewItemQQcategoryZ38634QQihZ005QQitemZ150029576419QQtcZphoto)

From my understanding the Impreza NA 2.5 is the same as our Legacy ( across my 00-04 years anyways ).

[warrior]

If you're going to get a "generic" Ebay CAI, don't pay that much for the Cosmo intake. Search for a buyer named Bomb Effect. They had short Rams and CAI in multiple colored piping for under $ 20 and 30 respectively.

Oh, here's a link to the short ram. He's got 10 up from time to time, but the CAI's are harder to find.

http://cgi.ebay.com/ebaymotors/90-97-SU ... QQtcZphoto (http://cgi.ebay.com/ebaymotors/90-97-SUBARU-IMPREZA-2-2-2-5L-NON-TURBO-BL-AIR-INTAKE_W0QQcmdZViewItemQQcategoryZ38634QQihZ005QQitemZ150029576419QQtcZphoto)

From my understanding the Impreza NA 2.5 is the same as our Legacy ( across my 00-04 years anyways ).

That's awesome, but I'm in canada and his shipping charge is $50 USD by UPS.. and UPS will charge about $50 in brokerage fees, so in the end, I'll end up paying almost $130 CAN (with conversion and what not) whereas I spend a little more and get that Cosmo cold air rather than the short ram.. =\

[Wiscon_Mark]

you should ask for usps shipping. UPS majorly screws canada, but I shipped a short throw to quebec for $4 insured (3day shipping) through the post office. He could probably manage it.

[dropdfocus]

That's awfully expensive for a non name brand intake (ex. Injen, AEM, K&N, etc.).

[JordanIsHere]

Be careful with Cosmo. Here's a thread from the 'ol Hyundai forum I used to visit: http://www.hyundaiperformance.com/forum ... hp?t=64556 (http://www.hyundaiperformance.com/forums/topic.php?t=64556)
It's entitled "fuck cosmo racing"...

[warrior]

Be careful with Cosmo. Here's a thread from the 'ol Hyundai forum I used to visit: http://www.hyundaiperformance.com/forum ... hp?t=64556 (http://www.hyundaiperformance.com/forums/topic.php?t=64556)
It's entitled "*4 letter word* cosmo racing"...

Yikes! Thanks for the info, and I think I'll stay away! I'll look for something name brand cause i want CAI, not the short ram.. call me picky! :oops:

[auspex]

i have a 97 leg gt and I bought the cosmo racing short RAM and i dig it. All the pieces fit just fine and it looks killer (red!!!) they get my thumbs up....sounds bad ass too!

mike

[warrior]

Impreza 2.5 RS has the smae engine so wouldn't it fit for our legacys?

http://cgi.ebay.com/ebaymotors/COLD-AIR ... dZViewItem (http://cgi.ebay.com/ebaymotors/COLD-AIR-INTAKE-SYSTEM-01-04-Impreza-RS-2-5L_W0QQitemZ260029008129QQihZ016QQcategoryZ38634QQrdZ1QQcmdZViewItem)

What about that one.. :shock:

[Huffer]

Impreza 2.5 RS has the smae engine so wouldn't it fit for our legacys?

DEPENDS ON THE INTAKE TYPE: MAF or MAP!

The 2.5RS had the same engine - had the same variations on intakes also.

[2.5GT]

It'll fit, just need a lil bit of work and some parts from advance :grin:

[Wiscon_Mark]

It'll fit, just need a lil bit of work and some parts from advance :grin:

You did this yourself?

[2.5GT]

[quote="2.5GT":34z5ofd5]It'll fit, just need a lil bit of work and some parts from advance :grin:

You did this yourself?[/quote:34z5ofd5]

no not yet. but will be :grin:

[supra90turbo]

No problem yet with my eBay intake... Performs fine.
Any more money spent is a waste IMO...
I've got an AEM DryFlow filter on the end of it now, instead of that eBay filter...

http://img312.imageshack.us/img312/6938/dsc038239gl.th.jpg (http://img312.imageshack.us/my.php?image=dsc038239gl.jpg) http://img511.imageshack.us/img511/4647/dsc038251ur.th.jpg (http://img511.imageshack.us/my.php?image=dsc038251ur.jpg)