Legacy Vendors?

[backpack09]

What aftermarket vendors are there out there for us BD BG guys?

[d1giPhux]

What types of stuff are you looking for? There really arent too many 'aftermarket' vendors for things such as body kits, and that type of stuff really. Not many body type accessories other than JDM and EDM. There is diff stuff for suspension, and exhaust type stuff, but even that is limited as compared to import racing type stuff.. if thats what you mean.

[SilentRacer]

check the vendor section of this forum

[backpack09]

check the vendor section of this forum

Ha, Didn't see the "Vendor links" section.

Looks like Boxer4racing is the most comprehensive.

I am still looking for a SS clutch line, I am hoping to replace a lot of the rubber stuff that usually leaves me stranded.

[AussieDan]

The SS clutch line you need depends on your clutch setup. If you have a hard line from the clutch MC to the pitch stop mount bracket then you can use an SS clutch line for an Impreza RS. This has a banjo fitting on one end and a female threaded connector on the other.

If you have a flexible line running from the MC down to a damper mounted on the side of the trans, then another line running up to the slave cylinder, you can replace the whole thing with an SS line directly from the MC to the slave.

You'll just need 12" of ss line with a 10mm banjo on both ends. I paid $38 for mine at a local hydraulic hose shop. You could most likely use a prefabbed line like the 40-63020213ERL on this page:

http://www.mpsracing.com/products/Earls ... mblies.asp (http://www.mpsracing.com/products/Earls/Speed-Flex_Hose_Assemblies.asp)