02 steering wheel fit on my 95

[racinraders]

will a 2002 WRX momo steering wheel fit with my 95 Ls and "my" airbag.

[Huffer]

It should fit - you may have to mess with the airbag connections.
(disconnect the battery)

[battman]

I would recommend doing some research first. I put one in my BE but everything was a direct fit. Xcntrk75 on Nasioc ran into some problems in his BD. Here is his story here. http://forums.nasioc.com/forums/showthr ... ?t=1279731 (http://forums.nasioc.com/forums/showthread.php?t=1279731)


i followed the instructions off of scoobymods.com here is the link for that.
http://www.scoobymods.com/forums/showthread.php?t=127

Good luck and don't forget to unhook the battery, I don't think anyone would like an airbag to the FACE!

[sansMYSTi]

I would recommend doing some research first. I put one in my BE but everything was a direct fit. Xcntrk75 on Nasioc ran into some problems in his BD. Here is his story here. http://forums.nasioc.com/forums/showthr ... ?t=1279731 (http://forums.nasioc.com/forums/showthread.php?t=1279731)


i followed the instructions off of scoobymods.com here is the link for that.
http://www.scoobymods.com/forums/showthread.php?t=127

Good luck and don't forget to unhook the battery, I don't think anyone would like an airbag to the FACE!

Was that a direct fit, including the wiring harness? I want an '02 WRX wheel for my '02 LGT, but I am unsure of "connectivity" of the the wiring.

[Wiscon_Mark]

The wiring harness should work on 98+ Legacys (plug n play).

But definitely not for your 95. You're going to have to wire splice, or possibly see if you can't switch airbags from your 95 wheel to the WRX wheel so you can keep the connectors.

[battman]

Was that a direct fit, including the wiring harness? I want an '02 WRX wheel for my '02 LGT, but I am unsure of "connectivity" of the the wiring.

Yeah, everything was a direct fit. The airbag harness and the cruise harness were the exact same. Took about 15 minutes to install. probably would of been faster if I would of read about disconnecting the airbag harness. It was a PITA at first, but then read the instructions on getting it off, all systems go after that. I am pretty pleased with it.

https://sl-i.net/FORUM/images/imported/2007/06/HPIM0305-1.jpg

[Huffer]

Anyone want to see if the MOMO cover will fit on a regular wheel?

[RadeOn]

97+ airbags are de-powered relative to 95-96, so there might me some problems with this swap, if you ever need you airbags...

[Wiscon_Mark]

I'm curious to know if you can swap just the bag over so you keep the connections...is it super integrated into the cover?

[sansMYSTi]

Anyone want to see if the MOMO cover will fit on a regular wheel?

Ya I was wondering if you could just swap the Momo cover, rather than the whole wheel. I have nothing against the wheel itself, just the bland and boring SUBARU cover.

[battman]

I want to say yes, you can just swap the airbag cover. I don't see why not. My legacy one was the same size as the MOMO one.

[Huffer]

<--- starts scouring ebay....

[sansMYSTi]

If anyone has success with just swapping the cover, please let us know.