95 2.5L auto to a 99 5MT

[kkushner4474]

i dont know if this belongs in the swap and converisons section

please dont flame me for this one but...

will a 96 or 97 2.5L DOHC Automatic fit to a 99 5MT




second question there are 4 numbers underneath the powerstreeing pump on my engine what do they stand for
ex. 2171

[Reason]

The engine? yes it's the same 2.5 DOHC engine

[kkushner4474]

i pulled an engine from an automatic subaru outback either a 96 or 97 and whnt to put it in my 99 LGT with a 5MT

the problem i realzed today is that the number of studs, bolts and holes that connect the tranny and engine dont match up between 96/97 engine and 99 engine

also the starter is held in by 2 bolts in the 99 and the 96/97 engine only has one

tommrow morning i will try to take pictures to help explain what i am saying...

[kkushner4474]

Here are some pictures that will hopefully help...

https://sl-i.net/FORUM/images/imported/2007/06/100_1820-1.jpg
99 LGT DOHC MT engine if you look in the top left there are 2 bolts for the starter and over all there are 2 studs, and 8 bolts&holes

https://sl-i.net/FORUM/images/imported/2007/06/100_1825-1.jpg
96 or 97 L outback 2.5L DOHC AT, at the top left only has one bolt to hold in the starter and over all only 6 bolt&holes and no studs

https://sl-i.net/FORUM/images/imported/2007/06/100_1827-1.jpg
The 99 5MT with 10 bolt/stud holes and 2 of the holes are there for the starter

https://sl-i.net/FORUM/images/imported/2007/06/100_1826-1.jpg
Here are the series of numbers i was talking about below the power steering pump