Log in

View Full Version : NGK Spark Plugs for H6



repsolgamma
02-22-2008, 07:48 PM
Anyone know where to get new NGK's for my H6? They are hella expensive at the local stealer and was wondering if anyone knew of a better price elsewhere?

Thanks Dudes and Dudettes

Michael

1-3-2-4
02-22-2008, 09:11 PM
Uhmm try the auto parts store??

StatGSR
02-22-2008, 09:42 PM
^ what he said. copper plugs like the v-powers should be under a couple bux a pop.

Reason
02-23-2008, 02:14 AM
Or you could ask me :wink:

dodik
02-23-2008, 12:30 PM
don't buy copper our engine is pretty picky when it comes down to plugs but what more important is the amount of work you got to do to replace them with copper you'll have to go back there again pretty soon with iridium or platinum you wont. on subaruoutback.org there is a thread about how to change them and a few links to sites where you can get them for around 60 bucks.

P.S. Reason I didnt know you sold NGK PLFR6A-11 if so how much per set?

and here is the thread
http://www.subaruoutback.org/forums/sho ... readid=797 (http://www.subaruoutback.org/forums/showthread.php?s=d82e248c9959e34de9f49a0486d3ee08&threadid=797)

deadlydave
02-23-2008, 12:50 PM
I ordered my NGK Iridiums from NGK USA's website.

StatGSR
02-23-2008, 01:14 PM
dodik, coppers give the best spark, yes they require more frequent changes, but for the cost and performance they cant be beat.

Reason
02-23-2008, 01:18 PM
dodik, coppers give the best spark, yes they require more frequent changes, but for the cost and performance they cant be beat.

I agree, if you have a EJ22 it takes 10 mins to change your plugs. In a EJ25 it's closer to 45 mins to an hour (depending on your skill level). I never change plugs on a H6 nor do I know where they are positioned on the block. If they are a bitch to change go platinum or Iridium. If they are easy to change go copper.

1-3-2-4
02-23-2008, 01:20 PM
Stay away from Bosh plugs!!!!

I had a pain changing out the plugs on a DOHC forester and I put those plugs in... UGH misfire so many times... finally got around to taking them back out.

Reason
02-23-2008, 01:22 PM
Stay away from Bosh plugs!!!!

I had a pain changing out the plugs on a DOHC forester and I put those plugs in... UGH misfire so many times... finally got around to taking them back out.

Yes stay away, get NGK or Denso

repsolgamma
02-23-2008, 01:41 PM
I want to use good NGK's, but they only list one type and its very expensive.

With over 210,000 miles I know my baby needs some new plugs and O2 sensor, but for fucks sake its gonna cost me 600.00 in parts alone.

So just wanted to know if I can get them cheaper from the good folks here on the list.

Michael

1-3-2-4
02-23-2008, 01:43 PM
Do they have any Denso's?

Wiscon_Mark
02-23-2008, 03:34 PM
New plugs and an o2 sensor costing over 600 bucks?

ehhhh?

NGK coppers are the best for our cars, period. Changing them every 30-40k miles is really no big deal when you consider they have twice the conductivity of Iridium and 4x that of platinum.

And yes, stay away from Bosch Platinums.

repsolgamma
02-23-2008, 04:09 PM
24.00 per NGK X6 = 150.00
O2 Sensor 4 each at 120.00 = 480.00

At least 600.00 for parts.

Unless someone has a better source!

Michael

StatGSR
02-23-2008, 04:21 PM
ok hold on, what year and model is your car, cause this isnt adding up dude.

decke48
02-23-2008, 04:32 PM
looking at autozone you can get ngks from $2.09 to $7.99 a pop depending on the sub-model (dont have gps in stores)
napa doesnt sell ngks for the h6

StatGSR
02-23-2008, 04:36 PM
^ um every napa i have been to does.

decke48
02-23-2008, 05:49 PM
opps. i mean for the h6

dodik
02-23-2008, 11:18 PM
to change plugs on h6 is a major pia front two are ok the back four got about an inch of space to put your wrench threw and to get them out, not to mention taking off 6 ignition coils, two ignition coil covers, remove washer fluid tank, battery, engine cover probably more that i cant remember. nothing like h4 that you guys have and as much as they cost im keeping my iridium.
oh and """"Unless someone has a better source!""" read my first post here there is a link in it click it then click on one of the links in the thread itself it will give you your stock plugs for about 9.50 a pop so that will put you at 60 not 150.

Reason
02-23-2008, 11:56 PM
I'll give you guys prices on plugs when I here from my guy.

Reason
02-25-2008, 05:04 AM
I can get those $135 shipped and paypaled

_RM_
02-25-2008, 09:04 AM
to change plugs on h6 is a major pia front two are ok the back four got about an inch of space to put your wrench threw and to get them out, not to mention taking off 6 ignition coils, two ignition coil covers, remove washer fluid tank, battery, engine cover probably more that i cant remember. nothing like h4 that you guys have and as much as they cost im keeping my iridium.
oh and """"Unless someone has a better source!""" read my first post here there is a link in it click it then click on one of the links in the thread itself it will give you your stock plugs for about 9.50 a pop so that will put you at 60 not 150.
Iridiums actually work on the H6? I thought the only recommended NGK was the Laser Platinum? (using NGK's part finder)

decke48
02-25-2008, 11:53 AM
I can get those $135 shipped and paypaled
for plugs? thats $20 a plug. on an another note unless you have a CEL on for the rear o2s you dont need to replace them. all they do is see if you cat is doing its job. nothing to do with performance or gas mileage. so that saves you $240.

Wiscon_Mark
02-25-2008, 12:24 PM
The H6 has 4 o2 sensors?!!

I R confused.

Reason
02-25-2008, 12:33 PM
I can get those $135 shipped and paypaled
for plugs? thats $20 a plug. on an another note unless you have a CEL on for the rear o2s you dont need to replace them. all they do is see if you cat is doing its job. nothing to do with performance or gas mileage. so that saves you $240.

For the ones he wants yes, Obviously I can get different plugs cheaper.

repsolgamma
02-25-2008, 07:58 PM
The poster is correct, the plugs are about 20.00 each, at the cheapest place I can find them.

I know for a fact that the H6 has 4 O2 sensors, at about 120.00 each.

I know that they should not be replaced unless you get a CEL, but I have noticed a driveability and mileage gain with new o2 sensors in the past.

And how many more miles can I expect them to last before I get a CEL?

220,000 miles? 240,000 miles? Its going to be sooner than later!

So if I am wrong, show me how wrong I am because it will save me $$$!

Still looking for the answers, you are all taking me back to where I started - 600.00 for a tune up!

But I still love ya man.

Michael

Wiscon_Mark
02-25-2008, 09:38 PM
Well, if you get a CEL, it shouldn't be necessary to replace all 4. I'm guessing 2 are pre cat, and two are post.

decke48
02-25-2008, 10:41 PM
The poster is correct, the plugs are about 20.00 each, at the cheapest place I can find them.
Michael
ngks.com the most expensive is $12 a plug(double platinum, iridium)
the svx doesnt use a different plug than most subarus w/ 2.2, 1.8, some 2.5s 14mm, 3/4"reach 5/8 hex
www.ngk.com (http://www.ngk.com)
parts app for the double platinum
http://www.ngk.com/results_fitment.asp?pid=PFR6B%2D11

decke48
02-25-2008, 11:18 PM
also the have the oe ngk o2 for the front l&r for $52 each

repsolgamma
02-27-2008, 12:08 AM
Where can you get the plugs for 12.00 ea, and the O2 for 52.00?

No such site as www.ngks.com (http://www.ngks.com)!

Michael

Reason
02-27-2008, 12:13 AM
Where can you get the plugs for 12.00 ea, and the O2 for 52.00?

No such site as www.ngks.com (http://www.ngks.com)!

Michael

If you actually read decke48 thread you will notice he put down www.ngk.com (http://www.ngk.com) NOT www.ngks.com (http://www.ngks.com) Believe it or not that extra "S" makes a difference :wink:

repsolgamma
02-27-2008, 12:14 AM
You also have the wrong part number - those are for the 4 cylinder engine, not the 3.0 H6, they have a different part number that is about 24.00 at the stealer.

But only 11.00 at the www.ngk.com (http://www.ngk.com) site.

good work, already saved my 1/2 the amount.

THANKS BRO!

Michael

repsolgamma
02-27-2008, 12:21 AM
O2 sensor cost - ouch!

NGK - OE identical O2 sensor

Stock #: 24657
Part #: 24657
4 Wire Non-Flanged original equipment identical oxygen sensor, direct plug in, no cutting or splicing. 20.5" (520mm) wire length.
Loc 1: FRONT
Loc 2: LEFT
$267.85 Qty:

decke48
02-27-2008, 11:57 AM
ohh sorry www.ngk.com (http://www.ngk.com). lol i guess you didnt see the link
also with 2xx,xxx+ i thought you were talking about the 3.3 not the 3.0.