Log in

View Full Version : Need help ID'ing gaskets / seals...


d1giPhux
03-18-2008, 01:58 PM
Okay.. so I have no clue what some of these gaskets are.. well.. any of them really.

I'm Posting up pictures in hope that maybe people can help me ID them a bit.

It might also help if you cant explain WHICH one you are talking about, to take it into ms paint and circle it or something. haha. Thanks guys!

1:

https://sl-i.net/FORUM/images/imported/2008/03/seal1png-1.jpg

2:

https://sl-i.net/FORUM/images/imported/2008/03/seal2png-1.jpg

3:

https://sl-i.net/FORUM/images/imported/2008/03/seal3png-1.jpg

4:

https://sl-i.net/FORUM/images/imported/2008/03/seal4png-1.jpg

5:

https://sl-i.net/FORUM/images/imported/2008/03/seal5png-1.jpg

6:

https://sl-i.net/FORUM/images/imported/2008/03/seal6png-1.jpg
Huffer
03-18-2008, 04:08 PM
#2 looks like an assortment of O-rings
#3 looks like a waterpump.

Are these all from a Subaru?
Reason
03-18-2008, 06:19 PM
#3 is water pump, IAC valve and TB gasket. Looks like a felpro kit.
2.5GT
03-18-2008, 09:27 PM
dude, easiest way to find out is...take apart your engine, then match the gaskets piece by piece :lol:
d1giPhux
03-18-2008, 09:54 PM
^ LOl.. but then id need MORE gaskets. And yeah, this is from a complete engine rebuild kit from when i had my engine rebuilt. Some of them they didn't need.. so I'm trying to figure out what i have, that way i can keep them for myself, or if anyone needs them part them out, so they don't go to waste!

And nice.. looks like #3 has been knocked out. Can you tell me which is which there.. like, left side, top, and bottom on #3.. i will label them and keep them.. i just wanna try to figure out what most of this is.. even though im sure i'll never figure out what the orings are for.

Thanks again!
2.5GT
03-18-2008, 10:06 PM
I'll contribute.

#6 see that triangular shape thing, i believe that's the gasket for the EGR solenoid.
Hocrest
03-18-2008, 10:23 PM
4 - The 2 flat rectangular ones, go under the plastic PCV chambers at the top of each head.

5 - The large washers look like the head bolt washers.

The long, thin, crooked pieces are to fit around different places on the timing belt covers
d1giPhux
03-20-2008, 10:04 PM
Nice, thanks guys! Anyone know what the large circle, with the small circle attached to it in pic #6 is?