Recommendations for streetable clutch/flywheel combo?

[Huffer]

Post up what you're using, and what for (DD, autox, ring racing etc) and how long for.

I'm looking at Exedy/Daikin OEM replacements or ACT "Street" packages.

When replacing the clutch & flywheel, what replacement parts are you buying ?

[Airgne]

right now im useing a Spec stage 3 clutch and aluminum flywheel. its awsome, just takes some getting use to. its off or on no midd. if you get e spec you need to get sti mounts, ss clutch line, shifter bushing. the eng will jump like a virgin on prom night. this is my 3rd spec. 1 stage 3 on 180sx, 1 twin plate on 180sx, and now stage 3 on BE. its been on the BE for about 3weeks. i wanted to get a Cusco Super Single, because they are the best in my opinion. they blow the exedy and act out of the water.

[rougeben83]

ACT 14lb flywheel, ACT Stage 1 clutch, PDE sleeve kit to cut the chatter (it's also the throwout bearing). If you dont get the sleeve kit, get the normal throwout bearing.

Took a little getting used to but the car just wakes up with the lightened flywheel IMO. Highly recommended if you're already replacing the clutch anyway.

[Huffer]

PDE sleeve kit to cut the chatter (it's also the throwout bearing). If you dont get the sleeve kit, get the normal throwout bearing.

What's the PDE sleeve kit? I do want something to avoid the T/O bearing going off - currently my T/O is chirping when the clutch is out (neutral, idling).

Edit:
Is this the kit?
http://www.subaruwrxparts.com/products/ ... d749548ed1 (http://www.subaruwrxparts.com/products/5mt-transmission-snout-repair-kit-nonturbo-p-979.html?osCsid=333f04f521c7985c34ecd2d749548ed1)

[rougeben83]

PDE sleeve kit to cut the chatter (it's also the throwout bearing). If you dont get the sleeve kit, get the normal throwout bearing.

What's the PDE sleeve kit? I do want something to avoid the T/O bearing going off - currently my T/O is chirping when the clutch is out (neutral, idling).

Edit:
Is this the kit?
http://www.subaruwrxparts.com/products/ ... d749548ed1 (http://www.subaruwrxparts.com/products/5mt-transmission-snout-repair-kit-nonturbo-p-979.html?osCsid=333f04f521c7985c34ecd2d749548ed1)

Yup, that's the one. The product does work as advertised. I can play with the clutch to roll the car and have no chatter at all.

[jey]

Been on a Fidanza 9.5lb flywheel and stock clutch for over 70k miles now. Car is the DD, but it's been AutoXed, RallyXed, tracked, etc. The light flywheel is such an excellent mod.

[track8]

Exedy replacement clutch, Fidanza f/wheel, #3 SS hose directly from the master to the slave. This setup is on my DD LGT wagon and I really like it.

I've got a Fidanza and this: http://www.horsepowerfreaks.com/price/M ... Mitsubishi (http://www.horsepowerfreaks.com/price/Mitsubishi/1G_Eclipse-Talon/HorsepowerFreaks/Clutch/Clutch_Kits/part/Bronze_-_Mitsubishi) Horsepowerfreaks 6 puck disc with an ACT 2100 on my DSM track day/summer semi-DD car & this setup is a little trickier to drive but not at all unmanageable.

Unfortunately they don't seem to have a comparable disk for any Subaru app.s so that is of little help I suppose. :neutral: