Log in

View Full Version : shifter bushing(rear)


Airgne
05-23-2008, 12:08 PM
anyone know were this goes? i cant find it at all. i think i must be blind.
http://i288.photobucket.com/albums/ll176/Airgne/kbrearshifterbushingmain.jpg
decke48
05-23-2008, 02:14 PM
its under the car behind the linkage.
heres a cheap hint
|
o---|-o <its this one
Airgne
06-18-2008, 06:01 AM
couldnt find it. does my car not have one?
decke48
06-18-2008, 05:56 PM
here you go its above the driveshaft. if you cant find it i'de go get those eyes checked.
https://sl-i.net/FORUM/images/imported/2008/06/S1050246-1.jpg
https://sl-i.net/FORUM/images/imported/2008/06/S1050244-1.jpg
rougeben83
06-18-2008, 08:28 PM
it's around the midpipe area. It's further back than where you think it is.
Reason
06-18-2008, 09:05 PM
Make sure you do the other bushings too, not just that one.
Airgne
06-19-2008, 01:17 AM
what one? i installed a beatrush shifter bushing. is that the one your talkinf about?
Reason
06-19-2008, 01:21 AM
I never knew beatrush made bushings. Who makes this one your are showing? What website is it from?
Airgne
06-19-2008, 01:44 AM
the beatrush i got is for a wrx, but it worked. the rear shown ubove is kartboy. its off of rallysportdirect.com

i just order thing that are for the 2.5rs/wrx and see if they fit. that is how i found out the beatrush poly bushing worked. it is alot more ridgid than the kartboy one. after this bushing my tranny bushings should be done. got the beatrush shifter, kartboy tranny mount bushings, and kartboy ss. if anything elese let me know plz.
chuckthefuk
06-19-2008, 01:36 PM
Drop your exhaust.. Drop the exhaust shield. Between the cat and the 1st resonator.
Airgne
06-19-2008, 03:10 PM
thank you.
chuckthefuk
06-19-2008, 04:30 PM
No problem but BE CAREFUL when you REMOVE and REINSTALL the bolts holding the rear bushing in! There sealed bolts but you may have the chance of crossthreading due to the strange angle they go in on.

Good Luck..


Use penetrating fluid!

Rust is a bitch
Reason
06-19-2008, 04:55 PM
Work the bolt too, come so far out and go back in, spary lube in and and repeat. Make love to the hole, you don't want snapped bolts.
Airgne
06-19-2008, 05:55 PM
hopefully i dont have to bad of rust issues like you east coast guys. they dont use salt over here. they use pete gravel. hence why my car is on its 4th windsheild.