Speed bleeders for a BD/BG/BK...

[Huffer]

The 98 GT's have the same 2 pot brakes as the Impreza RS... does anyone know what the thread and pitch are for them?

M7 x 1.0 ?

Better yet, does anyone have the SKU's for the speedbleeders?

www.speedbleeder.com (http://www.speedbleeder.com)

[Plays_with_Toys]

I bought speed bleeders in the metric pitch and they ended up not having enough thread length to fully close so be careful. I ended up making an emergency run to the auto store and picked up normal bleeders.

[1-3-2-4]

forgot the site but I saw it on Nabisco.. what about those type that are a pump and you pressurize the pump and open each bleeder and it forces the old fluid out and the new fluid goes in?

[Huffer]

That's a power bleeder. I'm looking for the correct sizes for the speed bleeder valve. It's a one-way bleed valve to allow you to do one-person bleeds on the brake system.

[99gtlimited]

i don't know but i'm sure interested as well. let me know if you figure something out.

[rougeben83]

It's probably like mine and WRX's, either the M10 or M8 for the front, M8 for the rear (rear disk that is).