PDA

View Full Version : will these strut mounts fit my BD?



99gtlimited
06-04-2008, 01:40 AM
http://www.subaruxtras.com/subaru/0405-front-strut-mount-p-107.html

will these strut mounts fit BD?

WinterKnoll
06-04-2008, 05:53 AM
They'll fit, assuming you have a WRX suspension under there :wink:

Huffer
06-04-2008, 06:38 AM
By WRX suspension, he means springs and struts.

AussieDan
06-04-2008, 02:02 PM
Actually the upper perches are separate on the front, so they would work with your stock struts, springs and upper perches.

99gtlimited
06-04-2008, 03:50 PM
so these will work with Kyb Gr-2's and H&R springs for BD?

i'm not using any WRX parts but i want harder mounts in the front. thanks all

99gtlimited
06-07-2008, 09:39 PM
anybody??? bump

AussieDan
06-09-2008, 07:54 AM
https://sl-i.net/FORUM/images/imported/2008/06/FrontStrut-1.jpg

The image above is a 95-99 Legacy front strut assembly.

The strut mount is part 19, which is part # 2320AA100.

This part number is also used on the 93-01 Impreza (GC) and on the 02-05 Impreza RS (GD).

Part number 2320AA110 was used on the 97-01 Impreza Outback Sport and 02-06 WRX.

The only difference between the 2 is the hardness of the rubber, they have the same bolt pattern and are interchangeable.

There is only one part number for the Group-N front strut mount for the 1993-2007 Impreza.

If you use your upper perch, boot & bumpstop (15, 16, 17 & 18) with the H&Rs & GR2s you can use an Impreza Group-N mount.

You can get them marginally cheaper at SubaruGenuineParts (https://www.subarugenuineparts.com/product_info.php?cPath=33_68&products_id=654) or RalliSpec (http://www.rallispec.com/prod_mount.htm) and I'm sure you can do even better than that if you shop around.

I hope that answers your question :wink:

Huffer
06-09-2008, 08:18 AM
Great post Dan!

99gtlimited
06-09-2008, 01:37 PM
yes. that was a great answer. thanks a lot. sounds like i'm gonna be using those wrx group N mounts then with my h&r's and Gr-2s. Thanks for the great and well laid out info.