Hella horns

[rc1473]

I have a 95 bd and was wondering if hella horns are a bitch to put in?

[Huffer]

I have a 95 bd and was wondering if hella horns are a bitch to put in?

Depends on how much of a bitch is a bitch, right? :roll:

[rc1473]

lol idk it looks like a bitch that i could do in a day bc i just read some forums and it looks possible but will it work with my car's electrical system?

[chuckthefuk]

http://www.subydude.com/images/prod/products/Accessories/500/500/hella_power.jpg

Mounting is straight forwards.

Use the brackets that come with the Hella kit and mount them to your Rad support beam.

Run a switch from your console to the relay to the horns. Rig up 12v w/ a fuse and your set. Unless your running the high output hella horns..

Average install time is an hour if you have some idea .

I did this install in about 20 mins.

Here is a quick diagram on how-to wire the horns up to your stock horns.
https://sl-i.net/FORUM/images/imported/2008/07/hellawiring-1.jpg

https://sl-i.net/FORUM/images/imported/2008/07/IMG_0001copy-2.jpg

Cheers
- Chuck

[rc1473]

ok thanks my man!

[chuckthefuk]

If you use the above diagram I posted you can use the supplied relay that comes with the kit to tap into the stock horn setup.

Cheers
- Chuck

[ivwarrior]

Mine weren't bad to install at all. I used the stock horn wire to trigger the relay, so everything works like normal, and they're easy to remove and swap to a different car if I trade this one. I just unplugged the wire from the stock horn, and put a spade connector into the end, just like the stock horn uses.