PDA

View Full Version : suspension bits - H brace, trail arms and latteral arms


4n70n1n0
07-26-2008, 08:27 PM
Hey everyone,
I saw a thread once that covered this, but I can't find it. Even with the help of the "Search" feature so . . . .

Is this the H brace that will fit a BD ?
This one fits a 02-03 WRX

https://sl-i.net/FORUM/images/imported/2008/07/wrx20h20BRACKET-1.jpg

If not which one is it

Also

Will a Rear Trailing Arms, Rear Front Lateral Arms, and Rear Rear Lateral Arms that fit a Impreza GC fit the BD's ?

https://sl-i.net/FORUM/images/imported/2008/07/RTASI9505-1.jpg https://sl-i.net/FORUM/images/imported/2008/07/RFLASI9505-1.jpg https://sl-i.net/FORUM/images/imported/2008/07/RRLASI9505-1.jpg

THANKS,
Ant
rougeben83
07-26-2008, 09:10 PM
You need the H brace from the GC RS, not that one. I have that one, it only fits the turbo crossmember (xmember has the extra bolts for the front mounting points).

The last 2 rear arms would probably fit. Theyre adjustable enough to make up for any difference in arm length (if there even is any).
Reason
07-26-2008, 11:15 PM
Yes Rougeben is right it's the other brace that looks like an"A" almost. I looked too and couldn't find it.
Reason
07-27-2008, 02:03 AM
This is what you want.

https://sl-i.net/FORUM/images/imported/2008/07/IMPREZA9401BLUE-1.jpg

JMK don't ask if it fits, read and you will know. lol
chuckthefuk
07-27-2008, 09:42 PM
https://sl-i.net/FORUM/images/imported/2008/07/IMPREZA9401BLUE-1.jpg

H Brace - Subaru Impreza 95 96 97 98 99 00 01 European Impreza Only (US Version Impreza required Modification, not direct bolt on)

Damn it! You have to mod a mod :-?
Reason
07-27-2008, 10:26 PM
Damn it! You have to mod a mod :-?

The perks of being a Legacy owner.
4n70n1n0
07-28-2008, 08:46 AM
Yay! I love owning a BD ^_^ It's the best

RIGHT!!!

Ok, seems like I'm going to have to mod the H or A Brace.

We'll see
rougeben83
08-10-2008, 12:34 AM
Ok, finally took a pic of how the WRX brace bolts onto the car.

https://sl-i.net/FORUM/images/imported/2008/08/P1060704-1.jpg

As you can see, there's a nut right behind the front control arm bushing that N/A subframes do not have. This is part of the mounting points for the subframe brace that WRX's and STi's have. I had to make a space in between the H brace and subframe where the stock brace would normally be.

The 'K' braces made for the RS bolts to the bolt of the front control arm bushing itself.

Both braces end up connecting to the inner bolts of the rear control arm bushing mount.