PDA

View Full Version : Keyless Entry into 96+ Leggies



MyogiNightKid
10-26-2008, 12:07 PM
Solved second post!
I purchased http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=360045260298 to install on my 98 BK. Im planning on wiring the unit in the rear of the car but cannot find the lock and unlock signal wires.

4 wires total run into the release mechanism, and from what I can tell only two control the hatch lock. The remote system has a power, ground, and then a lock and unlock wire which send a charge to the corresponding wires in the car. Do 98s have a special sort of central locking system?

I installed this system on many of my other cars and it was cake.

Any ideas?

MyogiNightKid
10-26-2008, 01:36 PM
Got it. The door locks themselves are routed to a control unit, so tapping into the lock wires wont work. You need to tap into the wires going to/from the lock switch on either front door. White/red wire for lock and white for unlock.

Works great!