any suggestions before i kill people?wheel problem

[xXGTBspecXx]

ok so im trying to paint ADR13 rims gold... no matter what i do the primer spider webs up and ive wasted $20 already in paint.. im so pissed off rright now its not funny. is there any way to get this damn wheel to bare metal without media blasting?? i cant sand it cause i cant fit sand paper in some places.... please help

[Grafton]

how cold is it where your trying to paint?

[xXGTBspecXx]

75 in my room where im painting

[Huffer]

Dremel with a sander pad will get into the corners... if your primer is spiderwebbing, you probably need to thin it more? Maybe your sprayer is clogging up.

[xXGTBspecXx]

im using duplicolor self etching primer in a can.. also im painting them with duplicolor GS100 gold... in a can..

[Huffer]

Put the cans in hot water between coats to keep the paint atomized...?

[xXGTBspecXx]

i think the paint is reacting with the old color... i need paint stripper i think... i need the rims down to bare metal

[Huffer]

Shouldn't do, unless your base isn't dry...

[decke48]

have you used and solvent before you primered? was the solvent completely dried? lighter coats of primer spread over 3 coats with 15min dry times

[xXGTBspecXx]

huffer was right..thanks alot man. but 2 wheels are still a mess and i cant sand them.. i dont have a dremel.. so i still need paint stripper. but 2 wheels came out amazingly.. filled the kitchen sink up with hot water and let the paint sit in it for 15min, then id do a medium coat to fill in some scratches then put it back in the sink..